journal article·2012-01

The effect of pre-setting pressure applied flexural strength and fracture toughness of reactive powder concrete during the setting phase

Metin İpek, Kemalettin Yilmaz, Mucteba Uysal

Publisher page

Abstract

Abstract In this study, the effect of pre-setting pressure on reactive powder concrete (RPC) was examined. The fresh (plastic) concrete samples were filled in a specified beam mould and six different pre-setting pressure values (control-without pressure, 5, 10, 15, 20, 25 MPa) were applied. Flexural strength was improved by 34% with very low amounts (5 MPa) of pre-setting pressure. Also, toughness was increased more than thrice. In this study, the maximum flexural strength of 36.4 MPa and toughness of 116.960 N m were obtained under 25 MPa pre-setting pressure. Volume of sample was decreased 7.9% by pre-setting pressure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Optimisation of steel fibre reinforced concretes by means of statistical response surface method10.1016/S0958-9465(03)00161-6 ↗
2. Taşdemir MA, Bayramov F, Kocatürk, AN, Yerlikaya M. Betonun performansa göre tasarımında yeni gelişmeler, Beton 2004 Kongresi, June 10–12; 2004. p. 1–34.
3. Composition of reactive powder concrete10.1016/0008-8846(95)00144-2 ↗
4. Cement of yesterday and today concrete of tomorrow10.1016/S0008-8846(00)00365-3 ↗
5. The effect of curing conditions on compressive strength of ultra high strength concrete with high volume mineral admixtures10.1016/j.buildenv.2006.03.013 ↗
6. Mechanical properties of reactive powder concretes10.1007/BF02485945 ↗
7. Evolution of the capillary network in a reactive powder concrete during hydration process10.1016/S0008-8846(02)00893-1 ↗
8. Durability of reactive powder composites: influence of silica fume on the leaching properties of very low water/binder pastes10.1016/S0958-9465(98)00025-0 ↗
9. Effect of silica fume on steel fiber bond characteristics in reactive powder concrete10.1016/j.cemconres.2003.12.023 ↗
10. Aitcin PC. Concrete the most widely used construction materials. ACI SP, vol. 154; 1995. p. 257–66.
11. Mechanical properties of reactive powder concrete containing mineral admixtures under different curing regimes10.1016/j.conbuildmat.2008.08.003 ↗
12. Richard P, Cheyrezy MH. Reactive powder concretes with high ductility and 200–800MPa compressive strength. Concrete technology: past, present, and future. In: Proceedings of the V. Mohan Malhotra symposium, ACI SP-144; 1994. p. 507–18.
13. Teichman T, Schmidt M. Influence of the packing density of fine particles on structure, strength and durability of UHPC. Ultra high performance concrete (UHPC). In: International symposium on ultra high performance concrete, September 13–15; 2004. p. 312–23.
14. Effect of pre-setting pressure applied to mechanical behaviours of reactive powder concrete during setting phase10.1016/j.conbuildmat.2010.06.056 ↗
15. Neville · 1995
16. A high-silica-modulus cement for high performance concrete
17. The influence of microfillers on enhancement of concrete strength10.1016/0008-8846(93)90050-J ↗
18. Talebinejad I, Bassam SA, Iranmanesh A, Shekarchizadeh M. Optimizing mix proportions of normal weight reactive powder concrete with strengths of 200–350MPa. Ultra high performance concrete (UHPC). In: International symposium on ultra high performance concrete, September 13–15; 2004. p. 133–41.
19. The effect of curing conditions on compressive strength of ultra high strength concrete with high volume mineral admixtures10.1016/j.buildenv.2006.03.013 ↗
20. TS 10513. Çelik teller-beton takviyesinde kullanılan. Turkish Standards Institute; 1992.
21. TS 10514. Beton-Çelik Tel Takviyeli-Çelik Telleri Betona Karıştırma ve Kontrol Kuralları, Turkish Standards Institute; 1992.
22. TS 10515. Çelik Tel Takviyeli Betonun Eğilme Mukavemeti Deney Metodu, Turkish Standards Institute; 1992.
23. ASTM C 1018. Standard test method for flexural toughness and first-crack strength of fiber-reinforced concrete (using beam with third-point loading), annual book of ASTM standards, V 4.02. American Society for Testing and Materials, Philadelphia, PA; 1989. p. 637–44.
24. JSCE standard SF-4, method of test for flexural strength and flexural toughness of fiber reinforced concrete. Japan Society of Civil Engineers (JSCE) Standard; 1984. p. 58–66.
25. Toughneses evaluation of steel and polypropylene fibre reinforced concrete beams under bending