journal article·2013-01

Quantitative infrared thermography inspection for FRP applied to concrete using single pixel analysis

Jeff R. Brown, H.R. Hamilton

Publisher page

Abstract

Abstract This research investigated infrared thermography (IRT) as a nondestructive testing method for FRP systems applied to concrete. Twenty-seven small-scale specimens (15 cm × 30 cm) were constructed using carbon and glass FRP composites with thicknesses ranging from 1 mm to 4 mm. Different wet lay-up procedures were used to saturate dry fibers and the level of matrix saturation was also varied (weight fractions for fibers ranged from 0.4 to 0.67). Infrared thermography inspections were performed by heating samples for 60 s with halogen lamps and an existing normalization technique was applied to the resulting temperature vs. time history for each pixel in the resulting series of thermal images. This method was shown to be effective for minimizing the effects of non-uniform heating as well as establishing the relative depth of fabricated defects with respect to the FRP/concrete interface. The normalized temperature response for defect-free regions in each specimen was also shown to be dependent on matrix saturation levels, the presence/absence of a thickened epoxy tack-coat, and the uniformity of matrix saturation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thermography and Photoacoustic Techniques · Ultrasonics and Acoustic Wave Propagation · Structural Health Monitoring Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. American Concrete Institute (ACI) Committee 440. Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures. Farmington Hills, Michigan: American Concrete Institute, ACI 440.2R-02; 2002.
2. Mirmiran A, Shawhawy M, Nanni A, Kharbari V. NCHRP report 514. Bonded repair and retrofit of concrete structures using FRP composites. Washington, DC: National Cooperative Highway Research Program; 2004.
3. ICC Evaluation Services. Acceptance criteria for concrete and unreinforced masonry strengthening using fiber-reinforced composite systems. Whittier, California: AC125; 2003.
4. American Concrete Institute (ACI) Committee 440. Report on fiber-reinforced polymer (FRP) reinforcement for concrete structures. Farmington Hills, Michigan: American Concrete Institute, ACI 440R-07; 2007. p. 77.
5. CERF. Gap analysis for durability of fiber reinforced polymer composites in civil infrastructure. Reston, Virginia: Civil Engineering Research Foundation; 2001.
6. Non-destructive testing techniques for FRP rehabilitated concrete. I: a critical review10.1504/IJMPT.2004.004996 ↗
7. Investigation of durability and surface preparation associated defect criticality of composites bonded to concrete10.1016/j.compositesa.2008.03.003 ↗
8. Defect depth retrieval from pulsed phase thermographic data on Plexiglas and aluminum samples10.1117/12.540855 ↗
9. Maldague · 2001
10. Matched excitation energy comparison of the pulse and lock-in thermography NDE techniques10.1016/j.ndteint.2008.05.007 ↗
11. Investigation of heating methods and detection limits for infrared thermography inspection of FRP composites used to strengthen reinforced concrete
12. Flash thermography modeling based on IR camera noise characteristics
13. Brown J, Hamilton III HR. Phase thermography inspection of multi-layer FRP composites bonded to concrete, SAMPE 2004, San Diego, California, November 15–18; 2004.
14. Fuselage inspection of Boeing-737 using lock-in thermography
15. Preliminary thermography studies for quality control of concrete structures strengthened with fiber-reinforced polymer composites10.1061/(ASCE)0899-1561(2003)15:3(266) ↗
16. Analysis methods for full-field time-resolved infrared radiometry10.1117/12.235378 ↗
17. Status of thermal NDT of space shuttle materials at NASA10.1117/12.669684 ↗
18. Heat transfer mechanisms in fiber-reinforced polymer composites bonded to concrete10.1117/12.715738 ↗