RC beams shear-strengthened with FRP: Stress distributions in the FRP reinforcement
Source abstract
Abstract
Abstract Reinforced concrete (RC) beams may be strengthened for shear with externally bonded fibre reinforced polymer (FRP) composites through complete wrapping, U-jacketing or bonding on their sides only. The two main shear failure modes of such strengthened beams are FRP rupture and debonding. In both modes of failure, the contribution of the bonded FRP reinforcement to the shear capacity of the beam depends strongly on the stress (or strain) distribution in the FRP at the ultimate limit state. This paper presents a numerical study of the FRP stress distribution at debonding failure in U-jacketed or side-bonded beams using a rigorous FRP-to-concrete bond–slip model and assuming several different crack width distributions. Numerical results indicate that Chen and Teng’s early simple assumption [Chen JF, Teng JG. Shear capacity of FRP-strengthened RC beams: FRP debonding. Constr Build Mater 2003;17:27–41] for the stress distribution in the FRP results in satisfactory predictions for the effective FRP stress in most cases for both U-jacketed and side-bonded beams. However, it may become unconservative for side-bonded beams that have only light flexural steel reinforcement.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Shear capacity of FRP-strengthened RC beams: FRP debonding10.1016/S0950-0618(02)00091-0 ↗
2. Shear strengthening of reinforced concrete beams using externally applied composite fabrics
3. Strengthening of reinforced concrete beams with externally bonded fiber-reinforced-plastic plates: design guidelines for shear and flexure10.1139/l98-008 ↗
4. Contribution of externally bonded FRP to shear capacity of RC flexural members10.1061/(ASCE)1090-0268(1998)2:4(195) ↗
5. Maeda T, Asano Y, Sato Y, Ueda T, Kakuta Y. A study on bond mechanism of carbon fiber sheet. In: Proceedings of 3rd international symposium on non-metallic (FRP) reinforcement for concrete structures, Sapporo; 1998. p. 279–85.
6. Analytical study of reinforced concrete beams strengthened with web-bonded fibre reinforced plates or fabrics
7. Shear strengthening of reinforced concrete beams using epoxy-bonded FRP composites
8. Design of concrete flexural members strengthened in shear with FRP10.1061/(ASCE)1090-0268(2000)4:4(198) ↗
9. Chen JF, Teng JG. Shear strengthening of RC beams by external bonding of FRP composites: a new model for FRP debonding failure. In: Proceedings (CD-ROM), 9th international conference on structural faults+repairs, London; 4–6 July, 2001.
10. Chen JF, Teng JG. A shear strength model for FRP strengthened RC beams. In: FRPRCS-5 fibre-reinforced plastics for reinforced concrete structures, Cambridge; 2001. p. 205–14.
11. Shear capacity of FRP strengthened RC beams: fibre reinforced polymer rupture10.1061/(ASCE)0733-9445(2003)129:5(615) ↗
12. Shear strengthening of RC beams using FRP composites10.1002/pse.179 ↗
13. Strengthening concrete beams for shear with CFRP sheets10.1016/S0950-0618(02)00088-0 ↗
14. Concrete Society Committee. Design guidance for strengthening concrete structures using fiber composite materials. Technical Report No. 55, Century House, Berkshire, UK; 2004.
15. Shear strengthening of reinforced concrete beams using fiber-reinforced polymer sheets with bonded anchorage
16. Shear strengthening reinforced concrete beams with fiber-reinforced polymer: assessment of influencing parameters and required research
17. Debonding in RC beams shear strengthened with complete FRP wraps10.1061/(ASCE)1090-0268(2005)9:5(417) ↗
18. Vertical shear interaction model between external FRP transverse plates and internal steel stirrups10.1016/j.engstruct.2005.08.010 ↗
19. Teng · 2002
20. Behaviour and strength of FRP-strengthened RC structures: a state-of-the-art review10.1680/stbu.2003.156.1.51 ↗
21. Bond–slip models for FRP sheets/plates externally bonded to concrete10.1016/j.engstruct.2005.01.014 ↗
22. Recommendations for upgrading of concrete structures with use of continuous fiber sheets
23. fib. Externally bonded FRP reinforcement for RC structures. Task group 9.3. International Federation for Structural Concrete (fib); 2001.
24. ISIS Canada. Strengthening reinforced concrete structures with externally-bonded fiber reinforced polymers. ISIS Canada, University of Manitoba, Manitoba, Canada; 2001.
25. Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures
26. Tan Z. Experimental research for RC beam strengthened with GFRP. Master thesis, Tsinghua University, Beijing, China; 2002.
27. Lu XZ. Studies on FRP-concrete interface. PhD thesis, Tsinghua University, Beijing, China; 2004.
28. Simplified shear design method for concrete beams strengthened with fiber reinforced polymer sheets10.1061/(ASCE)1090-0268(2004)8:5(425) ↗
29. Tests and design equations for FRP-strengthening in shear10.1016/j.conbuildmat.2006.06.023 ↗
30. Anchorage strength models for FRP and steel plates bonded to concrete10.1061/(ASCE)0733-9445(2001)127:7(784) ↗
31. FRP-to-concrete interfaces between two adjacent cracks: theoretical model for debonding failure10.1016/j.ijsolstr.2005.07.023 ↗
32. Debonding failure along a softening FRP-to-concrete interface between two adjacent cracks in concrete members10.1016/j.engstruct.2006.04.017 ↗
33. ANSYS. User’s manual. ANSYS Company; 1999.