Minimum specimen size for fracture parameters of site-casting dam concrete
Source abstract
Abstract
Abstract This paper presents the minimum specimen size for experimental determination of the fracture parameters of site-casting dam concrete. Five series of wedge-splitting specimens for dam concrete with maximum aggregate size of 150 mm were tested, casting in the site of an actual super-high arch dam with its mixing tower system. The complete load-crack mouth opening displacement and load-crack tip opening displacement curves of the specimens were acquired. The fracture parameters, including fracture energy, effective fracture toughness, and critical crack tip opening displacement, were also obtained. Furthermore, the effect of specimen size on fracture parameters was discussed, and it was found that the minimum specimen size for determining the independent fracture parameters of the site-casting dam concrete should satisfy that ligament length is six times larger than the maximum aggregate size.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dam Engineering and Safety · Rock Mechanics and Modeling · Landslides and related hazards
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Fracture behavior of site-casting dam concrete
2. Demonstration on intelligent dam
3. Study on the individual control for cantilever height of super-high arch dams
4. Determination of fully-graded hydraulic concrete fracture parameters by peak-load method
5. The effect of specimen size on the fracture energy of concrete10.1016/0008-8846(84)90062-0 ↗
6. Effect of specimen and crack sizes, water/cement ratio and coarse aggregate texture upon fracture toughness of concrete10.1680/macr.1984.36.129.227 ↗
7. Results of three comparative test series for determining the fracture energy GF of concrete10.1007/BF02472416 ↗
8. A comparative study of fracture parameters in notched concrete beams10.1680/macr.1988.40.142.50 ↗
9. Influence of ligament length and stress state on fracture energy of concrete10.1016/0013-7944(90)90187-L ↗
10. Experimental measurement of double-K fracture parameters of concrete with small size aggregate
11. Determination of fracture energy of concrete using wedge-splitting test on compact tension specimens
12. A study on double-K fracture parameters by using wedge-splitting test on compact tension specimens of various sizes
13. Relationship between crack tip opening displacement (CTOD) and crack mouth opening displacement (CMOD) throughout development of concrete crack
14. Fracture parameter of concrete based on the fictitious crack model
15. Size effect on fracture energy of concrete10.1016/0013-7944(90)90188-M ↗
16. Effect of aggregate and specimen size on fracture properties of dam concrete10.1061/(ASCE)0899-1561(1991)3:3(204) ↗
17. Fracture model evaluation of dam concrete10.1061/(ASCE)0899-1561(1991)3:4(235) ↗
18. Effect of specimen size on fracture energy and softening curve of concrete: Part I. experiments and fracture energy10.1016/j.cemconres.2008.03.017 ↗
19. The necessity and feasible way of studying the true fracture parameters of super-high arch dam concrete
20. Comité Euro-International du Béton · 1991
21. Two parameter fracture model for concrete10.1061/(ASCE)0733-9399(1985)111:10(1227) ↗
22. Effective crack model for the determination of fracture toughness (Ke IC) of concrete10.1016/0013-7944(90)90146-8 ↗
23. Determination of double-K criterion for crack propagation in quasi-brittle fracture, part II: analytical evaluating and practical measuring methods for three-point bending notched beams10.1023/A:1018740728458 ↗
24. Determination of Double-K criterion for crack propagation in quasi-brittle fracture, Part III: compact tension specimens and wedge splitting specimens10.1023/A:1018788611620 ↗
25. Two-parameter fracture mechanical analysis of a near-crack-tip stress field in wedge splitting test specimens10.1016/j.compstruc.2011.05.020 ↗
26. Calculating crack extension resistance of concrete based on a new crack propagation criterion10.1016/j.conbuildmat.2012.09.037 ↗
27. On fracture process zone and crack extension resistance of concrete based on initial fracture toughness10.1016/j.conbuildmat.2013.08.041 ↗
28. A fracture mechanics-based method for prediction of cracking of circular and elliptical concrete rings under restrained shrinkage10.1016/j.engfracmech.2014.10.015 ↗
29. Numerical characterization of the nonlinear fracture process in concrete10.1016/0013-7944(91)90165-W ↗
30. Statistical prediction fracture parameters of concrete and implications or choice of testing standard10.1016/S0008-8846(01)00723-2 ↗