Relationship between glass transition temperature and low temperature properties of oil modified binders
Source abstract
Abstract
Abstract Oils can be used as modifiers to improve low temperature performance of asphalt. However, the relationship between phase transition of oil modified asphalt and their low temperature properties still need more detailed research to reveal the effect of the transition on rheological properties. To investigate this, 9 different oils of bio-base and refined waste oils are used as modifiers in this study. During the study, Modulated Differential Scanning Calorimetry (MDSC) test is used to study the phase transition, and the Bending Beam Rheometer (BBR) test and Single Edge Notched Beam (SENB) test are used to evaluate the rheological and fracture properties of oil modified asphalts, respectively. It is found that the glass transition temperatures of oil modifiers are significantly different but are all much lower than the glass transition temperatures of asphalts. The results show that there is a good linear relationship between glass transition temperature and stiffness of asphalts, but no good correlation with the relaxation parameter (m) measured with the BBR. There is a much stronger correlation of the glass transition temperatures with the fracture properties of asphalts. Considering this strong relationship with the fracture properties, DSC test shows the potential possibility for quickly and accurately evaluating the low temperature fracture performance of asphalts. The combination of BBR and DCS can therefore be used to select the type and amount of oil modifier to meet a specific low temperature performance. The study was limited to one asphalt source and thus validation of the relationships for other asphalts is needed before generalizing the results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Geotechnical Engineering and Underground Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Environmentally appraising different pavement and construction scenarios: a comparative analysis for a typical local road10.1016/j.trd.2014.10.001 ↗
2. Reuse of fine quarry wastes in pavement: case study in Brazil
3. An overview on alternative binders for flexible pavement10.1016/j.conbuildmat.2015.03.068 ↗
4. Use of waste high density polyethylene as bitumen modifier in asphalt concrete mix10.1016/S0167-577X(03)00458-0 ↗
5. Laboratory evaluation of waste cooking oil-based bioasphalt as an alternative binder for hot mix asphalt10.1061/(ASCE)MT.1943-5533.0000713 ↗
6. Asphalt modification with used lubricating oil10.1139/L07-092 ↗
7. Effect of used-tire-derived pyrolytic oil residue on the properties of polymer-modified asphalts10.1016/S0016-2361(99)00216-1 ↗
8. Infrared spectra and rheological properties of asphalt cement containing waste engine oil residues10.1016/j.conbuildmat.2013.10.012 ↗
9. Effect of bio-based and refined waste oil modifiers on low temperature performance of asphalt binders10.1016/j.conbuildmat.2015.03.106 ↗
10. Effect of carbon fillers on electrical and road properties of conductive asphalt materials10.1016/j.conbuildmat.2014.06.059 ↗
11. Low temperature rheology of polyphosphoric acid (PPA) added bitumen10.1016/j.conbuildmat.2012.06.011 ↗
12. Temperature sensitivity and model of stress relaxation properties of cement and asphalt mortar10.1016/j.conbuildmat.2015.03.064 ↗
13. The nature of the glass transition and its determination by thermal analysis
14. Chalilleux · 2007
15. E. Chailleux, D. Hamon, V. Mouillet, Determination of the low temperature bitumen cracking properties: fracture mechanics principle applied to a three points bending test using a non homogeneous geometry. International Conference on Asphalt Pavements Quebec, 2006.
16. Low-temperature fracture testing of asphalt binders – regular and modified systems
17. S. Hesp, An improved low-temperature asphalt binder specification method. Ministry of Transportation Ontario Contract 9015-A-000190, 2003.
18. Low-temperature mechanics of hot recycled mixtures through Asphalt Thermal Cracking Analyzer (ATCA)10.1016/j.conbuildmat.2015.03.047 ↗
19. Laboratory investigation of bitumen based on round robin DSC and AFM tests10.1617/s11527-013-0123-4 ↗
20. Physical hardening of asphalt binders relative to their glass transition temperatures10.3141/1661-05 ↗
21. Glass transition and phase stability in asphalt binders10.1080/14680629.2008.9690158 ↗
22. Glass transition measurements of asphalts by DSC10.1007/BF01996742 ↗