Mechanical properties of high porosity cement-based foam materials modified by EVA
Source abstract
Abstract
Abstract Polymer ethylene vinyl acetate copolymer (EVA) modified high porosity (>90%) cement-based foam materials (HPECFM) were prepared by mechanical mixing air-entraining method. The influence of EVA on the mechanical properties of HPECFM was studied. The results showed that there was a direct correlation between the mechanical properties and EVA content. The maximum compressive strength 248 kPa was obtained when the ratio of EVA polymer to cement by weight (P/C) was 0.1. The impact toughness of EVA modified foam materials was increased with the rising of P/C. The impact toughness would be increased by 142.3% from 6.64 to 16.09 N m when the P/C varied from 0 to 0.33. The formed EVA polymeric film in the foam materials was observed by scanning electron microscopy (SEM). With the formation of EVA polymeric film, the matrix character of the foam materials would be changed from being brittle to flexible. Thus, the cement-based foam materials with excellent property of dissipating impact energy was obtained. This materials should be explored because of its simple fabrication process and good impact resistance properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. China building energy consumption: situation, challenges and corresponding measures10.1016/j.enpol.2008.11.037 ↗
2. Optimum combinations of building envelop energy-saving technologies for buildings in different climatic regions of China10.1016/j.enbuild.2012.11.019 ↗
3. Several problems of established energy strategy of China scientifically10.1016/j.egypro.2011.03.220 ↗
4. Effects of different insulation materials on primary energy and CO2 emission of a multi-storey residential building10.1016/j.enbuild.2014.07.009 ↗
5. A cement based syntactic foam
6. Microstructure of high-strength foam concrete10.1016/j.matchar.2008.12.011 ↗
7. Geopolymer foam concrete: an emerging material for sustainable construction10.1016/j.conbuildmat.2014.01.081 ↗
8. Sulphate resistance of fiber reinforced cement-based foams10.1016/j.conbuildmat.2011.03.034 ↗
9. High porosity (>90%) cementitious foams10.1016/j.cemconres.2009.10.012 ↗
10. Hydration-induced reinforcement of rigid polyurethane-cement foams: the effect of the co-continuous morphology on the thermal-oxidative stability10.1016/j.polymdegradstab.2012.10.027 ↗
11. The effect of foam polystyrene granules on cement composite properties10.1016/j.cemconcomp.2003.09.004 ↗
12. Properties of lightweight expanded polystyrene concrete reinforced with steel fiber
13. Fire performance of recycled rubber-filled high-strength concrete10.1016/S0008-8846(03)00253-9 ↗
14. Reproportioning of steel fibre reinforced concrete mixes and their impact resistance10.1016/j.cemconres.2005.06.011 ↗
15. A comprehensive review on the applications of waste tire rubber in cement concrete10.1016/j.rser.2015.10.092 ↗
16. Mechanical performance evaluation of polyester fiber and SBR latex compound-modified cement concrete road overlay material10.1016/j.conbuildmat.2014.04.054 ↗
17. A 43Ca and 13C NMR study of the chemical interaction between poly (ethylene-vinylacetate) and white cement during hydration10.1016/j.ssnmr.2011.07.001 ↗
18. The hydration of reactive cement-in-polymer dispersions studied by nuclear magnetic resonance10.1016/j.cemconres.2011.06.015 ↗
19. Effect of redispersible vinyl acetate and versatate copolymer powder on flexibility of cement mortar10.1016/j.conbuildmat.2011.07.050 ↗
20. Action of redispersible vinyl acetate and versatate copolymer powder in cement mortar10.1016/j.conbuildmat.2011.04.060 ↗
21. Influence of polymer powder on the bulk density and capillary water adsorption of cement mortar
22. Preparation and characterization of high porosity cement-based foam material10.1016/j.conbuildmat.2015.05.032 ↗
23. 2006
24. 2009
25. Tailoring the hierarchical pore structures in self-setting particle-stabilized foams made from calcium aluminate cement10.1016/j.matlet.2011.12.006 ↗
26. 2008
27. Elliptic solution to the Young-Laplace differential equation10.1016/j.jcis.2005.01.102 ↗
28. Mercury porosimetry: an inappropriate method for measurement of pore size distributions in cement-based materials10.1016/S0008-8846(00)00370-7 ↗
29. Study on some factors affecting the results in the use of MIP method in concrete research10.1016/S0008-8846(02)00974-2 ↗
30. The influence of moisture on the deformability of cement-polymer adhesive mortar10.1016/j.conbuildmat.2010.12.004 ↗
31. Experimental investigation on flexural toughness of hybrid fiber reinforced concrete (HFRC) containing metakaolin and pumice10.1016/j.conbuildmat.2013.10.087 ↗
32. Mechanical properties of EVA-modified cement for underground gas storage10.1016/j.jngse.2015.11.013 ↗
33. ESEM analysis of polymeric film in EVA-modified cement paste10.1016/j.cemconres.2004.10.037 ↗
34. Composite mechanism of polymer modified cement10.1016/0008-8846(94)00120-N ↗
35. Chemical interaction between EVA and Portland cement hydration at early-age10.1016/j.conbuildmat.2009.06.033 ↗
36. Influence of EVA and acrylate polymers on some mechanical properties of cementitious repair mortars10.1016/j.conbuildmat.2009.02.021 ↗