Direct tensile testing of Self-Compacting Concrete
Source abstract
Abstract
Abstract This study explores a new procedure to determine the stress-strain behaviour of Self-Compacting Concrete (SCC) under direct uniaxial tension. Special steel claws were designed, built and installed at both ends of 100 × 100 × 500 mm SCC specimens. These claws were used to transfer the applied tensile forces to the specimens. The cross-section of the specimens was reduced in the middle to ensure that failure would occur in the middle. The specimens were tested at 28 days for direct tensile stress-strain behaviour as well as for compressive, splitting and flexural strengths. The test results showed that there was no slippage or fracture at the ends of any of the specimens. Also, the failure occurred in the middle of specimens, as expected. The direct tensile strength of the specimens was found to be lower than the splitting and flexural strengths.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. A comparison between mechanical properties of self-compacting concrete and the corresponding properties of normal concrete10.1016/S0008-8846(00)00497-X ↗
2. A database for the evaluation of hardened properties of SCC
3. Hardened material properties of self-compacting concrete10.1080/13923730.2004.9636318 ↗
4. EFNARC · 2005 · 1
5. A review of the hardened mechanical properties of self-compacting concrete10.1016/j.cemconcomp.2006.07.010 ↗
6. Mechanical properties of conventional and self-compacting concrete: an analytical study10.1016/j.conbuildmat.2012.04.034 ↗
7. Uniaxial tension test for the determination of fracture parameters of concrete: state of the art10.1016/S0013-7944(01)00087-X ↗
8. Tensile strain capacity of concrete under various states of stress10.1680/macr.2000.52.3.185 ↗
9. Direct tension test and tensile strain capacity of concrete at early age10.1016/S0008-8846(03)00231-X ↗
10. Direct tensile strength of lightweight concrete with different specimen depths and aggregate sizes10.1016/j.conbuildmat.2014.04.055 ↗
11. Tensile behaviour of early age concrete: new methods of investigation10.1016/j.cemconcomp.2014.07.024 ↗
12. Mechanical properties of self-compacting concrete10.1007/978-3-319-03245-0_2 ↗
13. AS (Australian Standards) · 2014
14. AS (Australian Standards) · 2000
15. AS (Australian Standards) · 2000
16. AS (Australian Standards) · 1997
17. Dynamic properties of concrete in direct tension10.1016/j.cemconres.2006.03.003 ↗
18. Effect of testing method and strain rate on stress-strain behavior of concrete10.1061/(ASCE)MT.1943-5533.0000732 ↗
19. AS (Australian Standards) · 2009
20. EC 2 (Eurocode) · 2004 · 225
21. CEB-FIB · 2010 · vol. 1 · 292