journal article·2016-07Open access

Effects of applied environmental conditions on the pull-out strengths of CFRP-concrete bond

Muhammad Ikramul Kabir, Rijun Shrestha, Bijan Samali

Abstract

This paper presents observation and results of an experimental study undertaken to investigate the time dependant behaviour of bond between external Carbon Fibre Reinforced Polymer (CFRP) reinforcement and concrete subjected to temperature cycles, wet-dry cycles and outdoor environment separately. Single shear tests (pull-out test) were conducted to investigate bond strengths (pull-out strengths) of control (unexposed) and exposed specimens. Based on the results, the most significant degradation of bond strength was observed in specimens exposed to outdoor environment, whereas no significant deterioration due to temperature cycles was found probably due to the nature of applied cyclic temperature where the temperature was below the glass transition temperature of epoxy resin and the difference between the upper and lower boundary of the temperature envelope was small.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Durability of concrete beams externally reinforced with composite fabrics10.1016/0950-0618(95)00006-2 ↗
2. Durability characteristics of concrete beams externally bonded with FRP composite sheets10.1016/S0958-9465(97)00028-0 ↗
3. Effect of combined environmental cycles on the bond of FRP sheets to concrete
4. Stiffness degradation of FRP strengthened RC beams subjected to hygrothermal and aging attacks10.1177/0021998302036007614 ↗
5. Durability of fibre reinforced polymers (FRP) wraps and external FRP-concrete bond
6. Experimental investigation of the influence of moisture on the bond behavior of FRP to concrete interfaces10.1061/(ASCE)CC.1943-5614.0000142 ↗
7. Accelerated ageing behaviour of the adhesive bond between concrete specimens and CFRP overlays10.1016/j.conbuildmat.2010.08.003 ↗
8. Durability of CFRP-concrete joints under freeze-thaw cycling10.1016/j.coldregions.2010.11.008 ↗
9. Deterioration of FRP/concrete bond system under variable moisture conditions quantified by fracture mechanics10.1016/j.compositesb.2010.11.002 ↗
10. Teng · 2002
11. The use of accelerated ageing procedures to predict the long term strength of GRC composites10.1016/0008-8846(81)90117-4 ↗
12. Temperature dependence of hydrothermal ageing of CSM-laminate during water immersion10.1016/0266-3538(87)90050-9 ↗
13. Durability and service life prediction of GFRP for concrete reinforcement
14. Durability prediction for GFRP reinforcing bars using short-term data of accelerated aging tests10.1061/(ASCE)1090-0268(2006)10:4(279) ↗
15. Temperature as an accelerating factor for long-term durability testing of FRPs: should there be any limitations?10.1061/(ASCE)CC.1943-5614.0000102 ↗
16. Durability of the adhesive bond between continuous fibre sheet reinforcements and concrete in an outdoor environment10.1016/j.conbuildmat.2010.04.067 ↗
17. Durability of the bond between CFRP plates and concrete exposed to harsh environments10.1061/(ASCE)MT.1943-5533.0001226 ↗
18. Kabir · 2014
19. Anchorage strength models for FRP and steel plates bonded to concrete10.1061/(ASCE)0733-9445(2001)127:7(784) ↗
20. An experimental study on delamination of FRP plates bonded to concrete10.1016/j.conbuildmat.2007.04.009 ↗
21. A new single-shear set-up for stable debonding of FRP-concrete joints10.1016/j.conbuildmat.2008.04.003 ↗
22. ASTM D3039/D3039M · 2008
23. AS 1012.9 · 1999
24. AS 1012.17 · 1997
25. Fracture properties of CFRP-concrete bond subjected to three environmental conditions
26. Imani · 2010
27. Composites and FRP-strengthened beams subjected to dry/wet and salt fog cycles10.1061/(ASCE)MT.1943-5533.0001008 ↗
28. Transfer lengths and bond strengths for composites bonded to concrete10.1061/(ASCE)1090-0268(1999)3:4(153) ↗
29. Full-range behavior of FRP-to-concrete bonded joints10.1016/j.engstruct.2003.11.006 ↗
30. Bond-slip models for FRP sheets/plates bonded to concrete10.1016/j.engstruct.2005.01.014 ↗