journal article·2017-01

Thermal conductivity, compressive and residual strength evaluation of polymer fibre-reinforced high volume palm oil fuel ash blended mortar

Kim Hung Mo, Chun Siung Bong, U. Johnson Alengaram, Mohd Zamin Jumaat, Soon Poh Yap

Publisher page

Abstract

Abstract This paper presents the investigation of the properties of polymer fibre-reinforced high volume palm oil fuel ash (POFA) blended mortar. Considering the targeted application for non-structural building material, the thermal conductivity, compressive and residual strengths as well as the water absorption of the mortars were evaluated. The incorporation of POFA and polymer fibres (polypropylene and acrylic) exceeding 0.3 vol.% fraction generally reduced the thermal conductivity and compressive strength as well as increased the water absorption of the mortars. Although the inclusion of POFA did not reduce the strength loss upon exposure to elevated temperature, the addition of fibres above 0.3% had slight effect in reducing the compressive strength loss. Thus, based on the optimization in terms of the thermal conductivity, compressive and residual strengths, it is recommended to incorporate high volume POFA and addition of polymer fibres exceeding 0.3 vol.% fraction for non-structural application in building materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fire effects on concrete materials · Innovative concrete reinforcement materials · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Mechanical and fresh properties of sustainable oil palm shell lightweight concrete incorporating palm oil fuel ash10.1016/j.jclepro.2015.12.051 ↗
2. On blended cement and geopolymer concretes containing palm oil fuel ash10.1016/j.matdes.2015.09.140 ↗
3. Performance evaluation of concrete containing palm oil fuel ash exposed to elevated temperature10.1016/j.conbuildmat.2014.12.001 ↗
4. Engineering and transport properties of high-strength green concrete containing high volume of ultrafine palm oil fuel ash10.1016/j.conbuildmat.2011.12.007 ↗
5. Use of ground palm oil fuel ash to improve strength, sulfate resistance, and water permeability of concrete containing high amount of recycled concrete aggregates10.1016/j.matdes.2012.04.054 ↗
6. Durability properties of sustainable concrete containing high volume palm oil waste materials10.1016/j.jclepro.2016.07.061 ↗
7. Utilization of high-volume treated palm oil fuel ash to produce sustainable self-compacting concrete10.1016/j.jclepro.2016.07.133 ↗
8. Fabrication of bricks from paper sludge and palm oil fuel ash
9. Properties of palm oil fuel ash cement based aerated concrete panel subjected to different curing regime
10. High-temperature behaviour of HPC with polypropylene fibres: from spalling to microstructure10.1016/S0008-8846(01)00596-8 ↗
11. Experimental study of the thermo-mechanical properties of recycled PET fiber-reinforced concrete10.1016/j.compstruct.2011.03.025 ↗
12. Utilization of palm oil fuel ash in concrete: a review10.3846/13923730.2011.574450 ↗
13. Synthetic fibre-reinforced concrete10.1016/0079-6700(94)00030-6 ↗
14. Effect of acrylic fibres geometry on physical, mechanical and durability properties of cement mortars10.1016/j.conbuildmat.2011.07.061 ↗
15. Contribution of acrylic fibre addition and ground granulated blast furnace slag on the properties of lightweight concrete10.1016/j.conbuildmat.2015.07.048 ↗
16. The durability properties of polypropylene fiber reinforced fly ash concrete10.1016/j.matdes.2010.07.011 ↗
17. Strength improvement of mortar composites reinforced with newly hybrid-blended fibres: influence of fibres geometry and morphology10.1016/j.conbuildmat.2012.11.017 ↗
18. Effect of sample conditioning on the water absorption of concrete10.1016/j.cemconcomp.2011.05.007 ↗
19. Structural concrete with incorporation of coarse recycled concrete and ceramic aggregates: durability performance10.1617/s11527-008-9411-9 ↗
20. Assessing some durability properties of sustainable lightweight oil palm shell concrete incorporating slag and manufactured sand10.1016/j.jclepro.2015.06.122 ↗
21. Influence of elevated temperatures on physical and compressive strength properties of concrete containing palm oil fuel ash10.1016/j.conbuildmat.2010.11.034 ↗
22. Effect of cooling regime on the residual performance of high-volume palm oil fuel ash concrete exposed to high temperatures10.1016/j.conbuildmat.2015.09.001 ↗
23. High temperature resistance of normal strength and autoclaved high strength mortars incorporated polypropylene and steel fibers10.1016/j.conbuildmat.2006.11.003 ↗
24. Effect of elevated temperatures on the residual mechanical properties of high-performance mortar10.1016/S0008-8846(02)00709-3 ↗
25. Comparison of compressive and splitting tensile strength of high-strength concrete with and without polypropylene fibers heated to high temperatures10.1016/j.firesaf.2009.07.001 ↗
26. An experimental study on thermal conductivity of iron ore sand cement mortar10.1016/j.conbuildmat.2015.10.108 ↗
27. Influence of mineral admixtures on thermal conductivity and compressive strength of mortar10.1016/S0378-7788(02)00052-X ↗
28. The effect of different fiber reinforcement on the thermal and mechanical properties of autoclaved aerated concrete10.1016/j.conbuildmat.2016.02.223 ↗
29. Thermal and mechanical performance of natural mortar reinforced with date palm fibers for use as insulating materials in building10.1016/j.enbuild.2014.05.032 ↗