journal article·2017-05

Analysis of physico-chemical properties for crumb rubber in process of asphalt modification

Peilong Li, Zhan Ding, Peng Zou, Anshi Sun

Publisher page

Abstract

Abstract This study aimed to investigate the physical and chemical properties of crumb rubber in of asphalt modification. Dibutylphthalate (DBP) was chosen to simulate the light component in asphalt in the rubber soak test. After separatedfrom crumb rubber, the leaching solution sample was tested using gas chromatography–mass spectrometer (GC–MS) to analyze the interaction between crumb rubber and light component. Crumb rubber modified asphalt (CRMA) samples were respectively prepared under different conditions. Rubber particles were separated from asphalt by elution method and the morphology was studied with optical microscope. Volume expansion rate (Vr) was proposed to characterize rubber swelling in asphalt. In addition, infrared spectra (IR) and differential scanning calorimetry (DSC) tests were conducted on the asphalt samples removed from crumb rubber. The results and analysis indicated that physical change and chemical reaction exist in the interaction of crumb rubber with DBP. After swelling, the molecular chains of rubber were disentangled and released some smaller molecule materials and then dissolved into asphalt, which playing a role of asphalt modification, and the absorption peaks of typical functional groups increase significantly. But too high temperature or too much time may lead to excessive degradation or aggregation of crumb rubber as well as asphalt aging, which will cause the performances of CRMA deteriorate. The viscosity change is a macroscopic reflection of physical and chemical characterization of rubber in asphalt modification. From the perspective of swelling and degradation behavior, the optimalconditions are recommended that the dosage of crumb rubber is 20% approximately, preparation temperature is not higher than 195 °C and the processing time is less than 1.5 h.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Present situation and development trend of waste rubber recycling in China
2. Microscopic analysis of the interaction between crumb rubber and bitumen in asphalt mixtures using the dry process10.1016/j.conbuildmat.2013.07.041 ↗
3. Caltrans use of scrap tires in asphalt rubber products: a comprehensive review
4. Crumb rubber-bitumen interaction: cold-stage optical micros-copy10.1061/(ASCE)0899-1561(2003)15:5(419) ↗
5. Evaluation of the low temperature and elastic properties of crumb rubber and SBS modified bitumen and mixtures10.1061/(ASCE)MT.1943-5533.0000590 ↗
6. Z. Ding, P.L. Li, Research on influence factors and prediction model of viscosity of crumb rubber modified asphalt highway 7 (2012) 213–216.
7. Laboratory evaluation on high temperature viscosity and low temperature stiffness of asphalt binder with high percent scrap tire rubber10.1016/j.conbuildmat.2011.06.061 ↗
8. Investigation of asphalt binder containing various crumb rubbers and asphalts10.1016/j.conbuildmat.2012.11.063 ↗
9. High temperature rheological properties of crumb rubber modified asphalt binders with various modifiers10.1016/j.conbuildmat.2016.02.069 ↗
10. Mechanism of interaction of asphalt cement with crumb rubber modifier10.3141/1661-15 ↗
11. The effects of rejuvenating agents on recycled aged CRM binders10.1080/10298430500439319 ↗
12. Crumb rubber–bitumen interactions: diffusion of bitumen into rubber10.1061/(ASCE)0899-1561(2004)16:4(387) ↗
13. Diffusion kinetics of bitumen into waste tyre rubber
14. Improvement mechanism of crumb rubber-modified asphalt
15. ASTM D70-2009e1: Standard test method for density of semi-solid bituminous materials (Pycnometer Method), in: Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA, 2009.
16. ASTM D5-06e1: Standard test method for penetration of bituminous materials, in: Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA, 2006.
17. ASTM D36/D36M-12: Standard test method for softening point of bitumen (ring-and-ball apparatus), in: Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA, 2012.
18. ASTMD113-07: Standard test method for ductility of bituminous materials, in: Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA, 2007.
19. ASTM D92-92b: Standard test method for flash and fire points by cleveland open cup tester, in: Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA, 2012.
20. ASTM D1754/D1754M-09: Standard test method for effect of heat and air on asphaltic materials (Thin film oven test), in: Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA, 2009.
21. Micro-mechanism study and road engineering application of rubber asphalt
22. Rubber asphalt modification mechanism
23. Influence of waste powder amount to performance of different grade of asphalt
24. Study of rubber modified asphalt and its properties
25. Caltrans use of scrap tires in asphalt rubber products: a comprehensive review