Axial load behavior of structural bamboo filled with concrete and cement mortar
Source abstract
Abstract
Abstract Bamboo has been widely used as a rapidly renewable structural material to build permanent and temporary structures in past decades. However, the compressive bearing capacity of bamboo is relatively low, which limits its applications only in the structures under light loads. This paper proposed an innovative scheme to improve the load bearing capacity of bamboo by filling concrete or cement mortar in bamboo cavity. An experimental study on the axial load behavior of material-filled structural bamboo was carried out, aiming at investigating the effects of the infilled materials, the horizontal stiffener and the bamboo node. A total of 19 specimens were tested under axial compression. It was found that the axial load bearing capacities and the initial stiffness of both concrete-filled bamboo columns and cement mortar filled bamboo columns are much higher than the conventional bamboo, which verified the feasibility of the proposed stiffening scheme. Concrete-filled bamboo columns show better ductility than cement mortar filled bamboo columns. Furthermore, the ductility of concrete-filled bamboo columns can be improved by increasing the steel reinforcement ratio. In addition, the beneficial effect of the node on the ultimate bearing capacity can be found in material-filled bamboo specimens, indicating that the integrity of the bamboo node is essential for the bearing capacities of material-filled bamboo columns. Similarly, the horizontal stiffener passing through bamboo internode has a beneficial effect on both the ultimate bearing capacities and the corresponding axial strains of material-filled bamboo columns and conventional bamboo. However, the stiffener passing through the node may result in a decease in the bearing capacity. Finally, a simple and efficient method was proposed for predicting the ultimate bearing capacity of material-filled bamboo columns. The confining effects of bamboo on the infilled materials are considered carefully in this method. The calculated results by the proposed method were compared with experimental results, exhibiting a good agreement.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bamboo properties and applications · Tree Root and Stability Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Engineered bamboo for structural applications10.1016/j.conbuildmat.2015.01.077 ↗
2. Effect of processing methods on the mechanical properties of engineered bamboo10.1016/j.conbuildmat.2015.02.048 ↗
3. An environmental, economic and practical assessment of bamboo as a building material for supporting structures10.1016/j.conbuildmat.2005.02.023 ↗
4. A future bamboo-structure residential building prototype in China: life cycle assessment of energy use and carbon emission10.1016/j.enbuild.2011.06.013 ↗
5. Comparison of embodied energy and environmental impact of alternative materials used in reticulated dome construction10.1016/j.buildenv.2015.11.010 ↗
6. Experiments with rings to determine the anisotropic elastic constants of bamboo10.1016/j.conbuildmat.2011.12.089 ↗
7. Methods of determining transverse mechanical properties of full-culm bamboo10.1016/j.conbuildmat.2012.07.116 ↗
8. Development of a hollow cylinder test for the elastic modulus distribution and the ultimate strength of bamboo10.1016/j.conbuildmat.2013.10.051 ↗
9. Edge bearing tests to assess the influence of radial gradation on the transverse behavior of bamboo10.1016/j.conbuildmat.2016.11.106 ↗
10. Mechanical properties of structural bamboo following immersion in water10.1016/j.engstruct.2014.09.044 ↗
11. The mechanical properties of bamboo and vascular bundles10.1557/jmr.2011.314 ↗
12. Mechanical properties of structural bamboo for bamboo scaffoldings10.1016/S0141-0296(01)00110-9 ↗
13. Fatigue in bamboo10.1016/j.ijfatigue.2015.02.003 ↗
14. Fracture properties of bamboo10.1016/S1359-8368(01)00022-1 ↗
15. Creep behaviour of bamboo10.1016/j.conbuildmat.2014.05.024 ↗
16. Comparison of the structure and flexural properties of Moso, Guadua and Tre Gai bamboo10.1016/j.conbuildmat.2015.04.042 ↗
17. Strength analysis of bamboo by microscopic investigation of bamboo fibre10.1016/j.conbuildmat.2007.03.031 ↗
18. Column buckling of structural bamboo10.1016/S0141-0296(02)00219-5 ↗
19. Axial buckling of bamboo columns in bamboo scaffolds10.1016/j.engstruct.2004.08.011 ↗
20. Mechanical properties of functionally graded hierarchical bamboo structures10.1016/j.actbio.2011.06.008 ↗
21. Performance of bamboo reinforced concrete masonry shear walls10.1016/j.conbuildmat.2014.02.006 ↗
22. Experimental investigation on chemically treated bamboo reinforced concrete beams and columns10.1016/j.conbuildmat.2014.09.011 ↗
23. Bamboo as reinforcement in structural concrete elements10.1016/j.cemconcomp.2004.06.002 ↗
24. Ultimate load behaviour of bamboo-reinforced lightweight concrete beams10.1016/0958-9465(95)00018-8 ↗
25. Durability analysis of bamboo as concrete reinforcement10.1617/s11527-007-9299-9 ↗
26. ASTM C39/C39M · 2011
27. Axial load behavior of rectangular CFT stub columns with binding bars10.1260/136943307782417663 ↗
28. Experimental study of rectangular CFT columns with high-strength concrete10.1016/j.jcsr.2006.03.007 ↗
29. Ductility of concrete-filled steel box columns under cyclic loading10.1061/(ASCE)0733-9445(1994)120:7(2021) ↗
30. Axially loaded concrete-filled steel tubes10.1061/(ASCE)0733-9445(1998)124:10(1125) ↗
31. Sun · 2000
32. Theoretical stress-strain model for confined concrete
33. Triaxial behavior of high-strength concrete and mortar
34. Scaling of quasibrittle fracture: asymptotic analysis10.1023/A:1007387823522 ↗
35. Size effect in blunt fracture: concrete, rock and metal10.1061/(ASCE)0733-9399(1984)110:4(518) ↗
36. Size effect on tensile fracture properties: a unified explanation based on disorder and factuality of concrete microstructure10.1007/BF02473124 ↗
37. Size effect on compressive strength of plain and spirally reinforced concrete cylinders