Micromechanical characteristics of aggregate particles in asphalt mixtures
Source abstract
Abstract
Abstract Aggregate skeleton in asphalt concrete mixtures plays a significant role in the pavement performance. However, the mechanical roles for different-sized particles in the aggregate skeleton have not been fully revealed due to the limitations of physical techniques. This study utilizes a numerical simulation approach to evaluate aggregate structure characteristics and their resistance to deformation. Using the discrete element method (DEM), a three-dimensional (3D) aggregate blend was generated with due consideration of the gradation. The blend was employed to simulate the penetration test of aggregate blends with different friction coefficients of 0.1, 0.2, 0.3, 0.4 and 0.5, respectively. The determination of the friction coefficient and the validation of DEM model were further conducted by laboratory experiments. Using the validated DEM model, penetration tests of five uniform blends and nine graded blends were simulated. External applied force (i.e., penetration force), penetration displacement, contact force, contact number and force taken by aggregate particles of different sizes were calculated using the DEM simulation to explore the mechanical characteristics of aggregate particle. This study demonstrated that the aggregate size plays an important role on the mechanical performance of aggregate skeleton. The results of this research can be applied to optimize the mix design of asphalt concrete and to further improve the aggregate gradation design.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Geotechnical Engineering and Underground Structures · Numerical methods in engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Anthony · 2003
2. Tutumluer E, Pan T, Carpenter SH. Investigation of aggregate shape effects on hot mix performance using an image analysis approach. Transportation pooled fund study TPF-5 (023); 2005.p. 41–60.
3. Monismith CL. Influence of shape, size, and surface texture on the stiffness and fatigue response of asphalt mixtures. Highway research board special report no. 109, 1970, p. 4–11.
4. Effect of coarse aggregate morphology on permanent deformation behavior of hot mix asphalt10.1061/(ASCE)0733-947X(2006)132:7(580) ↗
5. Brown ER, Haddock JE. A method to ensure stone-on-stone contact stone matrix asphalt paving mixtures. National center for asphalt technology report no.97-2, 1997, p. 11–44.10.3141/1583-02 ↗
6. Aggregate blending for asphalt mix design: bailey method10.3141/1789-16 ↗
7. Gatchalian D, Masad E, Chowdhury A, Little D. Characterization of aggregate resistance to degradation in stone matrix asphalt mixtures. International center for aggregate research report no. 204–1F; 2006, p. 25–46.10.1177/0361198106196200107 ↗
8. X-ray computed tomography of aggregates and asphalt mixes
9. Evaluating the aggregate structure in hot-mix asphalt using three-dimensional computer modeling and particle packing simulations10.1139/l06-046 ↗
10. A discrete numerical model for granular assemblies10.1680/geot.1979.29.1.47 ↗
11. Structural characteristics of three-dimensional random packing of aggregates with wide size distribution
12. Rothenburg L. Micromechanics of idealized granular systems. PhD thesis, Carleton University; 1980.
13. Robertsono D, Bolton MD. DEM simulations of crushable grains and soils. In: Proceedings of the 4th International Conference on Micromechanics of Granular Media Powders and Grains, Sendai, Japan, 2001, 623–626.10.1201/9781003077497-153 ↗
14. Discrete element modeling to predict the modulus of asphalt concrete mixtures10.1061/(ASCE)0899-1561(2004)16:2(140) ↗
15. Three-dimensional discrete element models for asphalt mixtures
16. Discrete element modeling of aggregate behavior in fouled railroad ballast. Recent advancement in soil behavior, in situ test methods, pile foundations, and tunneling
17. Evaluating the aggregate structure in hot-mix asphalt using three-dimensional computer modeling and particle packing simulations10.1139/l06-046 ↗
18. Characterize packing of aggregate particles for paving materials: particle size impact10.1016/j.conbuildmat.2010.09.008 ↗
19. Numerical simulation of 3D semi-real-shaped granular particle assembly10.1016/j.powtec.2012.01.042 ↗
20. Discrete element modelling of influences of grain shape and angularity on performance of granular mixes for asphalts10.1016/j.sbspro.2012.09.891 ↗
21. Characterization of aggregates and asphalt concrete using X-ray computerized tomography: a state-of-the-art report