journal article·2017-10

Material moisture content of wood and cement mortars – Electrical resistance-based measurements in the high ohmic range

Kathrin A. Otten, Christian Brischke, Christopher Meyer

Publisher page

Abstract

Abstract The performance of porous and hygroscopic building materials is closely connected to its sorption properties and ability to get wet. Weight, mechanical, acoustic, and thermal properties as well as the resistance to discoloring and decay causing organisms are affected by moisture. For various reasons and purposes it is therefore recommendable to monitor the moisture content of building components continuously. The most common and most easily applicable methods are electrical resistance measurements. They can be applied to wood and wood-based materials as well as to mineral products such as mortar and brick. However, resistivity measurements require material specific characteristics and a temperature compensation since both parameters have a significant effect on electrical conductivity. This study aimed on developing a model to determine the moisture content at any temperature for different building materials such as native and modified wood as well as untreated and hydrophobized mortar. Therefore, the electrical resistance was measured with a data logging device in the giga ohm range to obtain values at low moisture contents. The model enables measurements at a wide range of moisture contents and suited with an acceptably high accuracy by using the appropriate resistance characteristic for each building material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Building materials and conservation · Hygrothermal properties of building materials · Masonry and Concrete Structural Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Modelling of salt crystallization in building materials with microstructure – poromechanical approach10.1016/j.conbuildmat.2012.06.035 ↗
2. Damage development to treated brick masonry in a long-term salt crystallization test10.1016/j.conbuildmat.2004.02.006 ↗
3. Effect of chloride salt, freeze-thaw cycling and externally applied load on the performance of the concrete10.1016/S0008-8846(02)00769-X ↗
4. Water absorption and critical degree of saturation relating to freeze-thaw damage in concrete pavement joints10.1061/(ASCE)MT.1943-5533.0000383 ↗
5. Effects of concrete properties and nutrients on fungal colonization and fouling10.1016/j.ibiod.2008.10.002 ↗
6. Forest Products Laboratory, Wood handbook – Wood as an engineering material, General Technical Report FPL-GTR-190, U.S., Department of Agriculture, Forest Service, Forest Products Laboratory, WI, 2010.
7. Hill · 2007
8. A brief review of the past, present and future of wood preservation10.1002/ps.1386 ↗
9. Monitoring the durability of hydrophobic treatment at existing concrete structures
10. Concrete protection by means of internal hydrophobization
11. Influence on the hydrophobicity of concrete surfaces treated with alkyl trialkoxysilanes
12. Kupfer · 1997
13. EN 13813-1, Moisture Content of a Piece of Sawn Timber – Part 1: Determination by Oven Dry Method, 2002.
14. EN ISO 12570, Hygrothermal Performance of Building Materials and Products – Determination of Moisture Content by Drying at Elevated Temperature, 2013.
15. Comparison of methods for arresting hydration of cement10.1016/j.cemconres.2011.06.003 ↗
16. DIN 18560-4, Estriche im Bauwesen – Teil 4: Estriche auf Trennschicht, 2012.
17. Moisture measurement in building materials: an overview of current methods and new approaches10.1177/0143624407084184 ↗
18. IEV 121, International Electrotechnical Vocabulary – Part 121: Electromagnetism – Section 121-11: Electromagnetic Concepts and Quantities, 2009.
19. Electrical resistivity mesurements for quality control during concrete construction
20. Electrical conductivity, diffusion, and permeabilty of Portland cment based mortars10.1016/S0008-8846(00)00281-7 ↗
21. Electrical resistivity of minerals and rocks at high temperature and pressure10.1029/RG020i002p00193 ↗
22. Measurement of the moisture content of concrete
23. The electrical resistance of wood as a measure of its moisture content10.1021/ie50213a022 ↗
24. The effect of temperature on the electrical resistance of wood10.1007/BF02663796 ↗
25. The effect of temperature on the electrical resistance of wood
26. The electrical conductivity of commercial dielectrics and its variation with temperature10.1021/j150343a015 ↗
27. Ion-conduction in cement based materials10.1016/0008-8846(85)90031-6 ↗
28. F. Rajabipour, J. Weiss, D. Abraham, Insitu electrical conductivity measurements to assess moisture and ionic transport in concrete (a discussion of critical features that influence the measurements), Online report available at , last retrieved on March 2010.
29. Resistance based moisture content measurements on native, modified and preservative treated wood10.1007/s00107-013-0775-3 ↗
30. Modeling the influence of thermal modification on the electrical conductivity of wood10.1515/hf-2013-0041 ↗
31. The electrical resistivity of concrete with emphasis on the use of electrical resistance for measuring moisture content
32. EN 480-13, Admixtures for Concrete, Mortar and Grout – Test Methods – Part 13: Reference Masonry Mortar for Testing Mortar Admixtures, 2011.
33. EN ISO 12571, Hygrothermal Performance of Building Materials and Products – Determination of Hygroscopic Sorption Properties, 2013.
34. EN ISO 9346, Hygrothermal Performance of Building and Building Materials – Physical Quantities for Mass Transfer – Vocabulary, 2017.
35. Measurement system for long term recording of wood moisture content with internal conductively glued electrodes10.1016/j.buildenv.2007.10.002 ↗
36. Lampen · 2012
37. Modelling the influence of hydrophobic treatment on the electrical conductivity of mortar and brick
38. Characterisation of thermally modified wood: molecular reasons for wood performance improvement10.1007/s001070050287 ↗
39. Study of chemical modifications and fungi degradation of thermally modified wood using DRIFT spectroscopy10.1007/s00107-003-0364-y ↗
40. Characterisation of thermally modified hard- and softwoods by 13C CPMAS NMR10.1016/j.carbpol.2004.08.008 ↗
41. Moisture phenomena in hydrophobic porous building material – Part 1: Measurements and physical interpretations
42. L. Meyer, C. Brischke, S.C. Lampen, Electric moisture content measurements in the field to examine the performance of wood based materials, in: Proceedings of the 8th Meeting of the Nothern European Network for Wood Science and Engineering (WSE), 2012, pp. 115–121.