Comparison of mechanical responses of asphalt mixtures manufactured by different compaction methods
Source abstract
Abstract
Abstract The compaction of an asphalt mixture is greatly important for ensuring durable pavement performance. In the past decades, laboratory compaction methods have been widely used to produce the test specimens, which undergo testing to infer the behaviour of asphalt pavements in the field. To ensure the consistency of samples both on the laboratory scale and from the field, a new laboratory compaction device (Aachen compactor) has been developed. Specimens manufactured by different compaction methods including field compaction, Aachen compaction and Marshall compaction were comprehensively compared and evaluated in this research using experimental tests, digital image processing techniques and the finite element method. The Aachen compactor specimens tend to show a better correlation with field samples than Marshall specimens. Therefore, the Aachen compactor is a feasible alternative for manufacturing asphalt specimens in the laboratory and thus can be used to better simulate the mechanical properties of asphalt mixtures in the field.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Mechanical and structural assessment of laboratory- and field-compacted asphalt mixtures
2. Rational method for laboratory compaction of hot-mix asphalt
3. Comparative evaluation of laboratory compaction devices based on their ability to produce mixtures with engineering properties similar to those produced in the field
4. Influence of compaction direction on performance characteristics of roller-compacted HMA specimens10.1080/10298436.2014.925550 ↗
5. S.F. Brown, J.M. Gibb, Effects of compaction on mechanical properties of asphalt mixtures, in: Proceedings of the 7th Conference on Asphalt Pavement for Southern Africa, Victoria Falls, Zimbabwe, 1999.
6. Influence of specimen preparation onto the mechanical behaviour of asphalt mixtures
7. Influence of asphalt mixture compaction method and specimen size on internal structure and mechanical properties
8. Comparative evaluation of laboratory compaction devices based on their ability to produce mixtures with engineering properties similar to those produced in the field
9. Effect of laboratory compaction on permanent deformation characteristics of asphalt-aggregate mixtures
10. H.L. Von Quintas, J.A. Scherocman, C.S. Hughes, T.W. Kennedy, Asphalt-aggregate mixture analysis system, AAMAS, National Cooperative Highway Research Program Report 338, Transportation Research Board, Washington, DC, USA, 1991.
11. J. Harvey, C.L. Monismith, Effects of laboratory asphalt concrete specimen preparation variables on fatigue and permanent deformation test results using strategic highway research programme A-003A proposed testing equipment, in: Transportation Research Record 1417, Transportation Research Board, Washington, DC, 1993, pp. 38–48.
12. A.E. Hunter, G.D. Airey, A.C. Collop, Influence of compaction method on asphalt mixture internal structure and mechanical properties, in: 3rd Eurasphalt and Eurobitume Congress, Vienna, 2, 2004, 1868–1877.
13. G.D. Airey, A.E. Hunter, A.C. Collop, S.E. Zoorob, Comparison of field and laboratory compacted asphalt mixtures, in: 10th International Conference on Asphalt Pavements, Quebec City, Leiden, Balkema, The Netherlands, 1, 2006, pp. 35–46.
14. Quantifying laboratory compaction effects on the internal structure of asphalt concrete10.3141/1681-21 ↗
15. Influence of asphalt compaction procedure on 3D deformation properties10.1080/10298436.2013.812213 ↗
16. Comparative study of asphalt concrete laboratory compaction methods to simulate field compaction10.1016/S0950-0618(98)00015-4 ↗
17. G.D. Airey, A.C. Collop, S. Zoorob, The influence of laboratory compaction methods on the performance of asphalt mixtures, Final Report, Engineering and Physical Science Research Council, 2005.
18. X-Ray tomography to characterize air void distribution in superpave gyratory compacted specimens10.1080/10298430290029902a ↗
19. Internal structure evolution of asphalt mixtures during freeze-thaw cycles10.1016/j.matdes.2015.07.073 ↗
20. Influence of aggregates’ spatial characteristics on air-voids in asphalt mixture
21. Application of digital image processing to quantitative study of asphalt concrete microstructure
22. X-ray tomograpy of asphalt concrete10.3141/1681-22 ↗
23. E. Masad, J. Button, Implications of experimental measurements and analyses of the internal structure of HMA, in: Proceedings of the 83rd TRB Annual Meeting, Transportation Research Board, Washington, DC, USA, 2004.10.3141/1891-25 ↗
24. Einsatz der Semi-Analytischen Finite-Elemente-Methode zur Beanspruchungszustände von Asphaltbefestigungen
25. P. Liu, D. Wang, M. Oeser, Leistungsfähige semi-analytische Methoden zur Berechnung von Asphaltbefestigungen, 3rd Dresdner Asphalttage, Dresden, 2013 (in German).
26. Application of semi-analytical finite element method to evaluate asphalt pavement bearing capacity
27. Application of semi-analytical finite element method coupled with infinite element for analysis of asphalt pavement structural response10.1016/j.jtte.2015.01.005 ↗
28. Measurement and evaluation on deterioration of asphalt pavements by Geophones10.1016/j.measurement.2017.05.066 ↗
29. SAFEM – software with graphical user interface for fast and accurate finite element analysis of asphalt pavements10.1520/JTE20150456 ↗
30. Review on heterogeneous model reconstruction of stone-based composites in numerical simulation10.1016/j.conbuildmat.2016.04.135 ↗
31. Three-dimensional heterogeneous fracture simulation of asphalt mixture under uniaxial tension with cohesive crack model10.1016/j.conbuildmat.2014.11.065 ↗
32. Discrete element modeling of asphalt concrete10.3141/1757-13 ↗
33. KoseS. Modeling and experimental measurements of strain distribution in asphalt mixes10.1061/(ASCE)0733-947X(2001)127:6(477) ↗
34. L. Wang, Stress concentration factor of poroelastic material by FEM simulation and X-ray tomography imaging, in: ASCE Engineering Mechanics Conference, American Association of Civil Engineers, Seattle, USA, 2003.
35. Three-dimensional discrete element models forasphalt mixtures
36. Investigation on interface stripping damage at high temperature using microstructural analysis
37. Modelling and evaluation of aggregate morphology on asphalt compression behaviour10.1016/j.conbuildmat.2016.12.041 ↗
38. Dynamic modulus simulation of the asphalt concrete using the X-ray computed tomography images10.1617/s11527-008-9408-4 ↗
39. Influence of aggregate particles on mastic and air-voids in asphalt concrete10.1016/j.conbuildmat.2015.05.031 ↗
40. Investigation on fatigue damage of asphalt mixture with different air-voids using microstructural analysis10.1016/j.conbuildmat.2016.08.138 ↗
41. Deutsches Institut für Normung: DIN 1996-4: 11/1984, Prüfung von Asphalt – Herstellung von Marshall-Probekörpern, Beuth Verlag, Berlin, 1984.
42. Deutsches Institut für Normung: DIN EN 12697-30: 2004, 09/2004, Asphalt – Prüfverfahren für Heißasphalt – Teil 30: Probenvorbereitung, Marshall-Verdichtungsgerät, Beuth Verlag, Berlin, 2004.
43. TP Asphalt-StB-Technische Pruefvorschriften Feur Asphalt Im Strassenbau-Teil: Einaxialer Druck-Schwell-Versuch – Bestimmung des Verformungsverhaltens von Asphalten Bei Waerme (in German).
44. P. Renken, Vergleich der mechanischen Eigenschaften von mittels Walz-Sektor-Verdichtungsgerät und Lamellen-Verdichtungsgerät hergestellten As-phaltprobeplatten. Forschung Straßenbau und Straßenverkehrstechnik Heft 821, Bonn 2001 (in German).
45. Aggregate structure characterization of asphalt mixtures using two-dimensional image analysis10.1080/14680629.2012.711923 ↗
46. Towards asphalt mixture morphology evaluation with the virtual specimen approach
47. Experimental testing and finite-element modeling to evaluate the effects of aggregate angularity on bituminous mixture performance10.1061/(ASCE)MT.1943-5533.0000386 ↗
48. Determination of effective thermal conductivity of asphalt concrete with random aggregate microstructure10.1061/(ASCE)MT.1943-5533.0001313 ↗
49. Three-dimensional discrete element models for asphalt mixtures
50. Development of a micromechanical finite element model from computed tomography images for shear modulus simulation of asphalt concretes10.1016/j.conbuildmat.2011.12.071 ↗
51. AASHTO PP 62-09, Standard Practice for Developing Dynamic Modulus Master Curves for Hot Mix Asphalt (HMA), American Association of State Highway and Transportation Officials, Washington, D.C, USA, 2009.
52. Determination of relaxation modulus using complex modulus of asphalt mixture
53. Discrete fracture modeling of asphalt concrete10.1016/j.ijsolstr.2009.02.006 ↗
54. Mo · 2010
55. Baek · 2010
56. Song · 2006
57. Abaqus Analysis User’s Guide, Abaqus 6.14, Dassault Systèmes Simulia Corp, 2014.
58. DIN EN 12697-44, Bituminous mixtures – test method for hot mix asphalt-Part 44: crack propagation by semi-circular bending test, 2014.
59. δ25 Crack opening displacement parameter in cohesive zone models: experiments and simulations in asphalt concrete10.1111/j.1460-2695.2008.01272.x ↗
60. Disk-shaped compact tension test for asphalt concrete fracture10.1177/0014485105053205 ↗
61. M.B. Mgangira, J.K. Anochie-Boateng, Quantification of aggregate grain shape characteristics using 3-D laser scanning technology, SATC, 2013.
62. Large-scale 3D random polycrystals for the finite element method: generation, meshing and remeshing10.1016/j.cma.2011.01.002 ↗
63. C. Karcher, Bewertung des Verformungsverhaltens von Asphalten mit dem Druckschwellversuch am Beispiel des Splittmastixasphaltes, Dissertation, Schriftenreihe des Instituts für Straßen- und Eisenbahnwesen der Universität Karlsruhe (TH), Heft 54, Karlsruhe, 2005.