journal article·2018-05

Experimental analysis of skeleton strength of porous asphalt mixtures

Xiaowei Wang, Xingyu Gu, Jiwang Jiang, Hanyu Deng

Publisher page

Abstract

Abstract The internal structure is critical to the functionality and rutting resistance of porous asphalt (PA) mixture. The objective of this paper is to develop a new test (skeleton penetration test, SPT) to directly evaluate the skeleton strength and optimize the gradation of PA mixture. The optimized diameter (50 mm) of loading head and penetration rate (2.25 mm/min) were determined for SPT to obtain a reliable skeleton strength. The influence of percent passing of 9.5 mm (P9.5) (40%, 50%, 60%, 70%, and 80%), percent passing of 4.75 mm (P4.75) (10%, 20%, and 30%), and percent passing of 2.36 mm (P2.36) (5%, 15%, and 25%) were evaluated by the SPT and breakdown test. The porosity and durability of the optimized gradation were evaluated by the volumetric determination test and Cantabro loss test, and the correlation of skeleton strength to the flow number obtained from dynamic creep test was also evaluated. Test results show that skeleton strength decreases with the increment of P2.36. P4.75 has negligible influence on the skeleton strength, and P9.5 mm has the largest impact on the skeleton strength. Based on the results, 40% and 80% are recommended as the lower limit and upper limit of P9.5. 10% and 30% are recommended as the lower and upper limit of P4.75, and 25% is recommended as the upper limit of P2.36 for PA mixture. Finally, it is observed that the optimized gradation recommended by the SPT also meets the requirements of porosity and durability of PA mixture, and skeleton strength correlates well to the rutting resistance. Therefore, SPT has a potential to improve the mixture design of PA mixture.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Urban Stormwater Management Solutions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Comparison of permeable friction course mixtures fabricated using asphalt rubber and performance-grade asphalt binders10.1016/j.conbuildmat.2011.08.085 ↗
2. Influence of aggregate gradation on the performance properties of porous asphalt mixtures10.1061/(ASCE)MT.1943-5533.0000602 ↗
3. F. Zhou, T. Scullion, Overlay tester: a simple and rapid screening test for characterizing crack resistance of hma mixes, in: 10th International Conference on Asphalt Pavements, Quebec, Canada, 2006.
4. Evaluation of permanent deformation of multilayer porous asphalt courses using an advanced multiply-repeated load test10.1016/j.conbuildmat.2017.11.028 ↗
5. Long-term field performance of porous asphalt pavement in China10.1080/14680629.2014.944205 ↗
6. Reduced rutting in unbound granular pavement layers through improved grading design
7. Gradation and packing characteristics affecting stability of granular materials: aggregate imaging-based discrete element modeling approach10.1061/(ASCE)GM.1943-5622.0000735 ↗
8. Permanent deformation behaviour of granular materials10.1080/14680629.2005.9689998 ↗
9. Evaluation and performance of hydrated lime and limestone powder in porous asphalt10.1080/14680629.2008.9690143 ↗
10. Performance of porous asphalt mixture with various additives
11. Development of an innovative uniaxial compression test to evaluate permanent deformation of asphalt mixtures10.1061/(ASCE)MT.1943-5533.0001038 ↗
12. Internal structure characterization of asphalt mixtures for rutting performance using imaging analysis10.1080/14680629.2012.657045 ↗
13. Effect of the contact structure characteristics on rutting performance in asphalt mixtures using 2D imaging analysis10.1016/j.conbuildmat.2016.12.210 ↗
14. Quantification of stone-on-stone contact in permeable friction course mixtures based on image analysis10.1016/j.conbuildmat.2017.12.189 ↗
15. Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils. ASTM D1883-16. 2016.
16. Research institute of highway ministry of transport of China. Technical specifications for construction of highway aspahlt pavements. JTG F40-2004, 2004.
17. R.B. Mallick, P.S. Kandhal, L. Allen, D.E.Watson, Design, Construction and Performance of New-Generation Open-Graded Friction Courses. NCAT Report 00-01. 2000.
18. Drainability of permeable friction course mixtures10.1061/(ASCE)MT.1943-5533.0000053 ↗
19. L.A. Cooley, J.W. Brumfield, R.B. Mallick, W.S. Mogawer, Partl MN, Poulikakos L, et al. Construction and Maintenance Practices for Permeable Friction Courses. NCHRP Report 640, 2009.
20. Evaluation methods for porous asphalt pavement in service for fourteen years10.1016/j.conbuildmat.2012.12.070 ↗
21. Porous asphalt mixtures in Spain
22. Stone-on-stone contact of permeable friction course mixtures10.1061/(ASCE)MT.1943-5533.0000117 ↗
23. A new creep test method for asphalt mixtures10.1080/14680629.2010.9690315 ↗
24. Investigation into close-grained gradation of aggregates skeleton under strong interlocked force via PFC2D numerical test
25. State of the art. I: resilient response of unbound aggregates10.1061/(ASCE)0733-947X(2000)126:1(66) ↗
26. Research institute of highway ministry of transport of China. Standard test methods of bitumen and bituminous mixtures for highway engineering. JTG E20-2011,2011.
27. M.W. Witczak, K. Kaloush, T. Pellinen, M. Elbasyouny, Quintus HV. Simple Performance Test for Superpave Mix Design. Washington D.C.: NCHRP Report 465; 2002.
28. Determination of volumetric properties for permeable friction course mixtures10.1520/JTE101696 ↗
29. Evaluation of durability tests for permeable friction course mixtures10.1080/10298430902730539 ↗
30. Mix design, performance and maintenance of permeable friction courses (PFC) in the United States: state of the art10.1016/j.conbuildmat.2016.02.053 ↗
31. Verification and modeling of three-stage permanent deformation behavior of asphalt mixes10.1061/(ASCE)0733-947X(2004)130:4(486) ↗