journal article·2018-07

Deterioration of concrete fracture toughness and elastic modulus under simulated acid-sulfate environment

Changlin Zhou, Zheming Zhu, Zhihong Wang, Hao Qiu

Publisher page

Abstract

Abstract In order to investigate the deterioration of the elastic modulus and fracture toughness of corroded concrete, three-point bending (TPB) tests were conducted by using corroded concrete specimens. The initiation load, the maximum load, the P-CMOD (loads versus crack mouth opening displacements) curves and the stress-strain curves were measured. Meanwhile, the deterioration near crack tips of the corroded specimens was observed with the aid of scanning electronic microscopy (SEM). Under the simulated acid solutions, the corrosion depth near crack tips gradually grows with the increase of corrosion time, and finally the concrete microstructures are porous and loose and microcracks are developed, which will deteriorate concrete material parameters, such as elastic modulus and fracture toughness. The test results show that subcritical propagation occurs during the loading progress from the initiation load to the maximum load, and the initiation toughness is about 80%–85% of the fracture toughness of the corroded concrete. For the specimens immersed in pH 2.5 and 3.5 solutions, both the fracture toughness and the elastic modulus increase in the early stage and then decrease with the increase of corrosion time, whereas for the specimens immersed in pH 1.5 solutions, both the elastic modulus and fracture toughness decrease almost linearly with immersion time. H+ and SO 4 2 - are two main factors in the deterioration of concrete in the simulated acid solutions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Concrete and Cement Materials Research · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Properties of concrete
2. Acidic attack of cement based materials-a review.Part 1. Principle of acidic attack10.1016/S0950-0618(01)00012-5 ↗
3. Deterioration mechanism of cementitious materials under acid rain attack10.1016/j.engfailanal.2012.08.007 ↗
4. Effect of simulated acid rain on deterioration of concrete10.1023/A:1013925316797 ↗
5. Effect of glass powder on sulfuric acid resistance of cementitious materials10.1016/j.conbuildmat.2016.03.049 ↗
6. Concrete deterioration due to acid precipitation
7. Mechanical properties and durability of concrete specimens containing nano silica in sulfuric acid rain condition10.1016/j.conbuildmat.2018.01.137 ↗
8. An experimental investigation on the erosion resistance of concrete containing various PET particles percentages against sulfuric acid attack10.1016/j.conbuildmat.2014.12.037 ↗
9. Erosion resistance of high-strength concrete containing forta-ferro fibers against sulfuric acid attack with an optimum design10.1016/j.conbuildmat.2017.07.180 ↗
10. Study on the degradation mechanism of sulphoaluminate cement sea sand concrete eroded by biological sulfuric acid10.1016/j.conbuildmat.2017.08.172 ↗
11. Deterioration of fracture toughness of concrete under acid rain environment10.1016/j.engfailanal.2017.02.013 ↗
12. Stress intensity factor for a cracked specimen under compression10.1016/j.engfracmech.2005.08.008 ↗
13. An alternative form of propagation criterion for two collinear cracks under compression10.1177/1081286508090043 ↗
14. The mechanisms and mechanics of concrete fracture – a review of th 5th international conference on fracture Ⅱ
15. Numeral modeling of fracture failure of recycled aggregate concrete beams under high loading rates10.1007/s10704-016-0145-3 ↗
16. Effects of maximum aggregate size on fracture behaviors of self-compacting lightweight concrete10.1016/j.conbuildmat.2016.07.061 ↗
17. Effect of fiber and aggregate size on mode-I fracture parameters of high strength concrete
18. Response of concrete to accelerated physical salt attack exposure10.1016/j.cemconres.2015.02.006 ↗
19. Statistical characterization of fracture in CFRP-concrete interfaces due to wet-dry cycling10.1007/s40799-017-0217-y ↗
20. Study on bending damage and failure of basalt fiber reinforced concrete under freeze-thaw cycles10.1016/j.conbuildmat.2017.12.096 ↗
21. Experimental investigation of the effects of aggregate size distribution on the fracture behaviour of high strength concrete10.1016/j.conbuildmat.2017.05.142 ↗
22. Investigation on effect of aggregate on three non-destructive testing properties of concrete subjected to sulfuric acid attack10.1016/j.conbuildmat.2016.04.017 ↗
23. Investigation of the effects of acid rain on the deterioration of cement concrete using accelerated tests established in laboratory10.1016/j.atmosenv.2004.05.017 ↗
24. A study on influences of acid rain in southwest China on concrete
25. Zhao · 2004
26. Compressive-shear rheological fracture of rock-like cracks and subcritical crack propagation test and fracture mechanism
27. Life-time prediction for rocks under static compressive and tensile loads: a new simulation approach10.1007/s11440-009-0085-4 ↗
28. Tada · 2000
29. Murakami · Stress Intensity Factors Handbook · 1987 · 60 · 1063
30. A simplified method for determining double-K fracture parameters for three-point bending tests10.1023/A:1007676716549 ↗
31. Determination of double-K criterion for crack propagation in quasi-brittle fracture Part I: experimental investigation of crack propagation10.1023/A:1018668929989 ↗
32. Determination of double- K criterion for crack propagation in quasi-brittle fracture, Part II: analytical evaluating and practical measuring methods for three-point bending notched beams10.1023/A:1018740728458 ↗