journal article·2019-03

Evaluation of elastic properties of fiber reinforced concrete with homogenization theory and finite element simulation

Yue Li, Yaqiang Li

Publisher page

Abstract

Abstract This paper aims to evaluate the elastic modulus and Poisson ratio of fiber reinforced concrete with homogenization theory and finite element simulation. A theoretical model for predicting the elastic modulus and Poisson ratio of fiber reinforced concrete was established by homogenization theory. Firstly, the elastic tensor matrix of unidirectional distribution fiber reinforced concrete composites was solved by the composite cylinder model and Ruess series model, and then the elastic tensor matrix of random distribution of fiber reinforced concrete composites was obtained based on the probability density function of fiber distribution. Finally, the elastic modulus and Poisson ratio of fiber reinforced concrete were obtained based on the elastic tensor matrix. In addition, according to the related parameters of experiment, the random distribution meso-model of fiber reinforced concrete was established using MATLAB software, and then the axial compression of fiber reinforced concrete was stimulated using Abaqus. The simulation values of elastic modulus and Poisson ratio of fiber reinforced concrete were obtained. By comparison, it was found that the homogenization theoretical predicted value, the finite element simulation value and the macroscopic experiment value were in good agreement, which verified the accuracy of the homogenization theoretical model and the finite element model.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Composite Material Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Towards sustainable concrete10.1038/nmat4930 ↗
2. Calcium silicate hydrate from dry to saturated state: structure, dynamics and mechanical properties10.1016/j.actamat.2013.12.016 ↗
3. Saturated concrete elastic modulus prediction
4. Lytton · 1990
5. Four-phase sphere modeling of effective bulk modulus of concrete10.1016/S0008-8846(99)00040-X ↗
6. Effective Young's modulus estimation of concrete10.1016/S0008-8846(99)00119-2 ↗
7. Macroscopic effective mechanical properties of porous dry concrete10.1016/j.cemconres.2012.10.012 ↗
8. Computer simulation of two-dimensional aggregate distribution with wall effect
9. Three-phase composite sphere model for the prediction of young' s modulus of concrete
10. Two-dimensional random aggregate structure for concrete
11. Random 3-D aggregate structure for concrete
12. Mechanical property research on concrete based on random multi-scale mechanical model
13. Influence of rheological properties of cement mortar on steel fiber distribution in UHPC10.1016/j.conbuildmat.2017.03.173 ↗
14. Spatial distribution of steel fibers and air bubbles in UHPC cylinder determined by X-ray CT method10.1016/j.conbuildmat.2017.11.030 ↗
15. Experimental study on performance of rubber particle and steel fiber composite toughening concrete10.1016/j.conbuildmat.2017.04.100 ↗
16. Mechanical performance of concrete combined with a novel high strength organic fiber10.1016/j.conbuildmat.2015.01.014 ↗
17. Seismic response of a rocking bridge column using a precast hybrid fiber-reinforced concrete (HyFRC) tube10.1016/j.compstruct.2017.04.058 ↗
18. Influence of matrix cracking and hybrid fiber reinforcement on the corrosion initiation and propagation behaviors of reinforced concrete10.1016/j.corsci.2018.06.004 ↗
19. Life cycle assessment (LCA) of double-skin façade (DSF) system with fiber-reinforced concrete for sustainable and energy-efficient buildings in the tropics10.1016/j.buildenv.2018.06.024 ↗
20. A micromechanical approach to elastic and viscoelastic properties of fiber reinforced concrete10.1016/j.cemconres.2009.10.018 ↗
21. Studies of mechanics of filamentary composites
22. Theory of mechanical properties of fibre-strengthened materials: I. Elastic behaviour10.1016/0022-5096(64)90019-5 ↗
23. Zhang · 2014
24. GB/T1596-2005, Fly Ash Used for Cement and Concrete. 2005.
25. ASTMC618-15, Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete. 2015.
26. GB/T50081-2002, Standard for test method of mechanical properties on ordinary concrete. 2003.
27. Micromechanics model for three-dimensional effective elastic properties of composite laminates with ply wrinkles10.1016/j.compstruct.2017.10.086 ↗
28. The flexural modulus of misaligned short-fiber-reinforced polymers10.1016/S0266-3538(99)00022-6 ↗
29. Effects of fiber length and fiber orientation distributions on the tensile strength of short-fiber-reinforced polymers10.1016/S0266-3538(96)00072-3 ↗
30. Mechanical properties of steel fiber-reinforced10.1061/(ASCE)0899-1561(2007)19:5(385) ↗
31. GB50010-2010, Code for design of concrete structures. 2015.
32. CEB-FIP, CEB-FIP Model Code 90. 1993.