journal article·2019-04

Research on the impact response and model of hybrid basalt-macro synthetic polypropylene fiber reinforced concrete

Hua Zhang, Lei Wang, Lingyu Bai, Maxwell Addae, Aayush Neupane

Publisher page

Abstract

Abstract This paper experimentally studied the impact behavior of hybrid basalt-macro synthetic polypropylene fiber reinforced concrete under impact loads (101–102 /s) with a split Hopkinson pressure bar (SHPB) device. The fiber content of basalt fiber (BF) was 0.05%, 0.075% and 0.1% and that of macro synthetic polypropylene fiber (SF) was 0.15%, 0.25%, 0.35% and 0.5%. Both static and impact tests were conducted to investigate the effect of strain rate and fiber hybrid ratio on the dynamic performance of the hybrid FRC, i.e. impact strength, dynamic increase factor (DIF), impact strain and toughness. The test results indicate that the hybrid FRC is strain-rate sensitive and a proper fiber hybrid ratio can improve the impact performance of concrete. DIF and l g e are linearly related, whereas the impact strain, toughness and strain rate present quadratic polynomial relationship. Both BF and SF can enhance the impact strength of concrete. However, BF has a better enhancement effect than SF in terms of improving impact strength but not as good as SF in improving impact toughness. Also, appropriate BF and SF hybrid ratio can enhance the impact strength and toughness of concrete but excess fiber content has a weakening effect. In this study, the optimal fiber hybrid ratio was 0.075%–0.35% (BF-SF) which had the best impact resistance. Finally, a damage dynamic constitutive model suitable for the hybrid FRC was proposed to fit the test curves from SHPB test based on Zhu-Wang-Tang (ZWT) constitutive model.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Ghadban · 2017
2. Hybrid short fiber reinforcement system in concrete: a review10.1016/j.conbuildmat.2017.03.059 ↗
3. Impact response of concrete reinforced with hybrid basalt-polypropylene fibers10.1016/j.powtec.2017.12.022 ↗
4. Shear behavior of steel or basalt fiber reinforced concrete beams without stirrup reinforcement
5. Dynamic compressive mechanical behaviour and modelling of basalt–polypropylene fibre-reinforced concrete10.1016/j.acme.2018.01.016 ↗
6. Experimental investigation on the static and impact behaviors of basalt fiber-reinforced concrete10.2174/1874149501711010014 ↗
7. Yin · 2015
8. Zhu · 2009
9. An experimental investigation on mechanical behavior of macro synthetic fiber reinforced concrete
10. Flow characteristics of macro-synthetic fiber-reinforced self-consolidating concrete
11. The effects of macro synthetic fiber reinforcement use on physical and mechanical properties of concrete10.1016/j.compositesb.2014.01.043 ↗
12. Dynamic mechanical property of hybrid fiber reinforced concrete(HFRC)10.1007/s11595-012-0548-6 ↗
13. Strain rate dependent behavior and modeling for compression response of hybrid fiber reinforced concrete10.1590/1679-78252717 ↗
14. Stress-strain behavior of concrete by overlapping hoops at low and high strain rates
15. T.J. Holmquist, G.R. Johnson, W.H. Cook, A computational constitutive model for concrete subjected to large strains, high strain rates and high pressures, Jackson, Dickert S. (eds.) The 14th International Symposium on Ballistics. American Defense Prepare ness Association, 1993, pp. 591-600.
16. Strain-rate effect in rapid triaxial loading of concrete
17. Impact dynamics investigation on some problems in bird strike on windshields of high speed aircrafts
18. A damage-modified nonlinear visco-elastic constitutive relation and failure criterion of PMMA at high strain-rates
19. Rate-sensitive analysis of framed structures Part I: Model formulation and verification10.12989/sem.1997.5.3.221 ↗
20. GB175-2009, Common portland cement, China: China Standard Press, Beijing, 2009 (in Chinese).
21. Study of two-dimensional effect on SHPB experiment
22. X. Luo, J. XU, W. LI, J. Zhang, Numerical simulation and spectrum analysis of dispersion effect of stress pulse in SHPB experiment, J. Exp. Mech. 4(25) (2010) 451-456 (In Chinese).
23. Experimental study on dynamic mechanical properties and constitutive model of basalt fiber reinforced concrete10.1016/j.conbuildmat.2017.06.177 ↗
24. Experimental and numerical studies on dynamic compressive behavior of reactive powder concretes10.1007/s10338-008-0851-0 ↗
25. Chinese Standard GB/T · 2016
26. Research on compressive impact dynamic behavior and constitutive model of polypropylene fiber reinforced concrete10.1016/j.conbuildmat.2018.07.164 ↗
27. Experimental study on split Hopkinson pressure bar pulse-shaping techniques for concrete10.1061/(ASCE)MT.1943-5533.0001494 ↗
28. Spalling tests for hybrid fiber high strength RC
29. Investigation into Pure Rate Effect on Dynamic Increase Factor for Concrete Compressive Strength10.1016/j.proeng.2017.11.042 ↗
30. Transient dynamic behavior of polypropylene fiber reinforced mortar under compressive impact loading10.1016/j.conbuildmat.2016.02.049 ↗
31. FIB, Model code 2010. First complete draft, Fib Bulletin No. 55, vol. 1. Lausanne: International Federation for Structural Concrete (2010).
32. Strain-rate-dependent constitutive equations for concrete10.1115/1.2842350 ↗
33. Dynamic behavior of concrete at high strain rates and pressures: I. experimental characterization10.1016/S0734-743X(01)00020-3 ↗
34. Zhou · 2017 · 151
35. Dynamic compressive behavior of concrete with different polyvinyl alcohol fiber content
36. Comparative study on the dynamic properties of lightweight porous concrete10.1039/C8RA00082D ↗
37. Experimental study of the high velocity expansion and fragmentation of PMMA rings
38. Impact compression experiment of steel fiber reinforced high strength concrete
39. Modelling of strain softening materials based on equivalent damage force10.1016/j.cma.2018.01.049 ↗
40. High-performance fiber-reinforced concrete: a review10.1007/s10853-016-9917-4 ↗
41. A damage-softening statistical constitutive model considering rock residual strength10.1016/j.cageo.2006.02.011 ↗