The effect of cellulose nanocrystal (CNC) particles on the porosity and strength development in oil well cement paste
Source abstract
Abstract
Abstract This paper reports a study to characterize the effect of cellulose nanocrystal (CNC) on the microstructure within hydrating oil well cement paste and correlate them to the mechanical performance at the macroscale. The changes in the pore structure and porosity of the hardened system was investigated using the gas sorption technique. The fresh oil well cement paste was subject to Dynamic Mechanical Analysis (DMA). The evolution in strength was measured over 8 weeks, under compression and tension. The results show that for pores less than 100 nm, the porosity was lower by 33% and the surface area is reduced by 66%, in the presence of CNC. These changes to the air-void network correspond to the evolution in compressive and tensile strength measured over the 56-day period. Of interest to oil well cements, is that adding CNC raised the compressive and tensile strength by 60% in the first 24 h.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Cellulose Research Studies · Microbial Applications in Construction Materials · Building materials and conservation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Shahriar · 2011
2. Yahaba · 2010
3. Preface
4. Pore structure and chloride permeability of concrete containing nano-particles for pavement10.1016/j.conbuildmat.2010.07.032 ↗
5. Relationship between pore structure and permeability of hardened cement mortars: on the choice of effective pore structure parameter10.1016/S0008-8846(97)00111-7 ↗
6. Development of technique for observing pores in hardened cement paste10.1016/S0008-8846(02)00806-2 ↗
7. The influence of different curing conditions onthe pore structure and related properties of fly-ash cement pastes and mortars10.1016/S0950-0618(97)00061-5 ↗
8. Tiab · 2015
9. The surface area of hardened cement paste as measured by various techniques
10. Binary segmentation of aggregate in SEM image analysis of concrete10.1016/S0008-8846(00)00493-2 ↗
11. Pore segmentation of cement-based materials from backscattered electron images10.1016/j.cemconres.2005.10.006 ↗
12. Estimating transport properties of mortars using image analysis on backscattered electron images10.1016/j.cemconres.2006.05.002 ↗
13. Adsorption surface area and porosity10.1149/1.2426447 ↗
14. Surface area measurement using gas sorption: application to cement paste
15. Adsorption of gases in multimolecular layers10.1021/ja01269a023 ↗
16. L.E. Copeland, J.C. Hayes, The determination of non-evaporable water in hardened Portland cement paste (No. 47), 1953.
17. The hydrates of magnesium perchlorate10.1021/j150522a007 ↗
18. The BET-specific surface area of hydrated Portland cement and related materials10.1016/S0008-8846(03)00225-4 ↗
19. Water permeability and chloride ion diffusion in Portland cement mortars: relationship to sand content and critical pore diameter10.1016/0008-8846(95)00069-O ↗
20. Nanomaterials–the driving force10.1016/S1369-7021(04)00627-3 ↗
21. Effect of nanosilica on characterization of Portland cement composite10.1016/j.msea.2006.03.010 ↗
22. Cellulose nanocrystals: chemistry, self-assembly, and applications10.1021/cr900339w ↗
23. Dufresne · 2012
24. Review: current international research into cellulose nanofibres and nanocomposites10.1007/s10853-009-3874-0 ↗
25. Anisotropy of the elastic properties of crystalline cellulose Iβ from first principles density functional theory with Van der Waals interactions10.1007/s10570-013-0071-8 ↗
26. The influence of cellulose nanocrystal additions on the performance of cement paste10.1016/j.cemconcomp.2014.11.008 ↗
27. The influence of cellulose nanocrystals on the microstructure of cement paste10.1016/j.cemconcomp.2016.09.008 ↗
28. Effect of cellulose nanocrystal (CNC) particles as an additive on the rheological behavior of oil well cement paste
29. A.P. Deshpande, J.M. Krishnan, S. Kumar, Rheology of complex fluids, 2010.
30. Bird · 1987
31. Larson · 1999
32. Dynamic mode rheology of cement and tricalcium silicate pastes from mixing to setting10.1016/S0008-8846(00)00464-6 ↗
33. Mezger · 2006
34. Use of oscillatory shear to study flow behavior of fresh cement paste10.1016/0008-8846(93)90092-N ↗
35. Cement sheath stress failure10.2118/20453-PA ↗
36. The effect of key cement additives on the mechanical properties of normal density oil and gas well cement systems
37. API Specification, 10A. Cements and Materials for Well Cementing, 2010.
38. Canadian Standards Association · 2013
39. ASTM C150/C150M-17 · 2017
40. ASTM C469-14 · 2014
41. ASTM C496/C496M-17 · 2017
42. Effect of HMEC on the consolidation of cement pastes: isothermal calorimetry versus oscillatory rheometry10.1016/j.cemconres.2009.02.002 ↗
43. Dynamic mechanical properties of EVA polymer-modified cement paste at early age10.1016/j.phpro.2012.03.088 ↗
44. Colloidal behaviour of aqueous cellulose nanocrystal suspensions10.1016/j.cocis.2017.02.002 ↗
45. Heel formation during volatile organic compound desorption from activated carbon fiber cloth10.1016/j.carbon.2015.09.049 ↗
46. Properties of nanofibre reinforced cement composites10.1016/j.conbuildmat.2014.04.072 ↗
47. Nanocelluloses: a new family of nature-based materials10.1002/anie.201001273 ↗