journal article·2019-07

Effect of aspect ratio and dosage on the flexural response of FRC with recycled fiber

Alejandro Meza, Salman Siddique

Publisher page

Abstract

Abstract Recycled fibers (RF) have demonstrated a sustainable solution in the generation of fiber reinforced concrete (FRC), but their flexural performance is still under study. This paper shows the flexural behavior of 15 FRCs specimens with different aspect ratio and dosage of RF (shredded plastic PET bottles), to understand how these parameters affect their performance. In addition, 9 FRCs samples with virgin fibers (commercial Polypropylene) and 2 control samples (without fibers) were used as comparative elements. Workability, three-point bending and residual pull-out tests in combination with a count of fibers in the cracking section were developed. The results show a better flexural behavior of FRC of samples with high dosage and aspect ratio of RF, this combination generated similar or superior flexural performance with a better adherence in the concrete than those with virgin fibers. Data showed three principal problems with FRCs with RF, a reduction of the workability in comparison with concrete without fibers, a lower quantity of fiber than samples with virgin fibers, and a non-uniform tendency in their mechanical performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Recycled Aggregate Concrete Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Use of recycled plastic in concrete: a review10.1016/j.wasman.2007.09.011 ↗
2. Early age performance and mechanical characteristics of recycled PET fibre reinforced concrete10.1016/j.conbuildmat.2016.01.029 ↗
3. Use of recycled plastics in concrete: a critical review10.1016/j.wasman.2016.03.005 ↗
4. How consumers of plastic water bottles are responding to environmental policies?10.1016/j.wasman.2016.12.034 ↗
5. An overview on the use of waste plastic bottles and fly ash in civil engineering applications10.1016/j.proenv.2016.07.067 ↗
6. Development of recycled PET fiber and its application as concrete-reinforcing fiber10.1016/j.cemconcomp.2007.02.002 ↗
7. Using waste plastic bottles as additive for stone mastic asphalt10.1016/j.matdes.2011.06.016 ↗
8. Comportamiento mecánico del plástico proveniente de residuos urbanos con carga de tensión
9. Laboratory investigation of rutting and fatigue in glassphalt containing waste plastic bottles10.1016/j.conbuildmat.2016.04.105 ↗
10. Use of plastic waste (poly-ethylene terephthalate) in asphalt concrete mixture as aggregate replacement10.1177/0734242X05056739 ↗
11. Recycled plastic waste fibers for reinforcing Portland cement mortar10.1016/j.conbuildmat.2016.09.131 ↗
12. Workability, strength, and durability of concrete containing recycled plastic fibers and styrene-butadiene rubber latex10.1016/j.conbuildmat.2018.05.175 ↗
13. Recycling woven plastic sack waste and PET bottle waste as fiber in recycled aggregate concrete: an experimental study10.1016/j.wasman.2018.05.035 ↗
14. Performance of plastic wastes in fiber-reinforced concrete beams10.1016/j.conbuildmat.2018.06.122 ↗
15. Experimental study of flexural behaviour of layered steel fibre reinforced concrete beams10.3846/13923730.2017.1319413 ↗
16. Optimization of a hybrid-fiber-reinforced high-strength concrete10.1007/s11029-016-9582-3 ↗
17. Experimental mechanical characterization of steel and polypropylene fiber reinforced concrete
18. Optimisation of steel fibre reinforced concretes by means of statistical response surface method10.1016/S0958-9465(03)00161-6 ↗
19. Shear behaviour of steel fibre reinforced self-consolidating concrete beams based on the modified compression field theory10.1016/j.compstruct.2012.02.025 ↗
20. Parameter optimization on compressive strength of steel fiber reinforced high strength concrete10.1016/j.conbuildmat.2010.12.051 ↗
21. Optimization of fibre reinforced concrete structural members10.1016/j.proeng.2013.09.018 ↗
22. Effect of waste plastic bottles on the stiffness and fatigue properties of modified asphalt mixes10.1016/j.matdes.2014.04.046 ↗
23. Influence of concrete and fibre concrete on the load-carrying capacity and deformability of composite steel-concrete columns10.3846/13923730.2007.9636419 ↗
24. Meza · 2015
25. Mechanical properties of concrete reinforced with recycled HDPE plastic fibres10.1016/j.conbuildmat.2016.04.050 ↗
26. Post-cracking performance of recycled polypropylene fibre in concrete10.1016/j.conbuildmat.2015.10.056 ↗
27. Durability performance of concrete incorporating waste metalized plastic fibres and palm oil fuel ash10.1016/j.conbuildmat.2018.05.282 ↗
28. Physical and mechanical behaviour of recycled PET fibre reinforced mortar10.1016/j.conbuildmat.2010.11.044 ↗
29. Use of recycled waste pet bottles fibers for the reinforcement of concrete10.1016/j.compstruct.2012.09.019 ↗
30. Effects of fiber type, volume fraction and aspect ratio on the flexural and acoustic emission behaviors of steel fiber reinforced concrete10.1016/j.conbuildmat.2018.06.065 ↗
31. Effects of fiber shape, aspect ratio, and volume fraction on flexural behavior of ultra-high-performance fiber-reinforced cement composites10.1016/j.compstruct.2017.04.069 ↗
32. A.C. 211 · 1991
33. C.N. delle Ricercce, Istruzioni per la Progettazione, l’Esecuzione ed il Controllo di Strutture di Calcestruzzo armato con Barre di Materiale Composito Fibrorinforzato, CNR-DT, 2006.
34. ACI360R-10 · 2010
35. ASTM · 2010
36. Concrete and Concrete Aggregates · 2007
37. C. ASTM, Standard Test Method for Slump of Hydraulic-Cement Concrete, 2012.
38. Mechanical performance of self-compacting concrete reinforced with steel fibers10.1016/j.conbuildmat.2013.10.054 ↗
39. Assessment of mechanical and durability properties of concrete containing waste rubber tire as fine aggregate10.1016/j.conbuildmat.2014.09.102 ↗
40. Fresh, strength, durability and microstructural properties of shredded waste plastic concrete
41. Flexural performance of fibrous concrete with cement additions10.1680/coma.12.00008 ↗
42. ASTM, Standard test method for flexural toughness and first-crack strength of fiber-reinforced concrete (using beam with third-point loading), C-1018, 1997.
43. J.S.o.C. Engineers, JSCE-SF4: Method of tests for flexural strength and flexural toughness of steel fiber reinforced concrete, Concrete library of JSCE, Part III-2 Method of tests for steel fiber reinforced concrete (3) (1984).
44. Flexural performance of fibre reinforced concrete made with steel and synthetic fibres10.1016/j.conbuildmat.2012.06.042 ↗
45. Simplified method for concrete pavement design with discrete structural fibers10.1016/j.conbuildmat.2006.08.008 ↗
46. E. Chemical, www.euclidchemical.com. (accessed 14.05.2018).