journal article·2019-08

Fatigue cracking performance evaluation of laboratory-produced polymer modified asphalt mixture containing reclaimed asphalt pavement material

Zhou Zhou, Xingyu Gu, Jiwang Jiang, Fujian Ni, Yanxu Jiang

Publisher page

Abstract

Abstract This study investigated the effect of reclaimed asphalt pavement (RAP) on the rheological properties of a polymer modified binder and the fatigue cracking performance of polymer modified asphalt mixture. Performance grading, master stiffness curve and black space analysis were conducted on the asphalt binders at different laboratory ageing conditions. The repeated loading semi-circular (R-SCB) test was conducted on the mixtures. Test results of the asphalt binder showed that the addition of RAP increased the stiffness and the Glove-Rowe (G-R) Parameter value of asphalt binder. Higher RAP binder could be susceptible to non-load-associated cracking after long-term ageing or in a cold climate as binders with more than 30% RAP after the PAV 40 h ageing condition had a G-R value greater than 180 kPa. The fatigue damage in R-SCB test were analyzed by energy consumption approach and can be divided into three stages including the steady and cumulative damage stage and jump damage. The cumulative energy increased linearly with the loading cycles and the cumulative energy evolution meets Linear Miner’s Law in R-SCB test, then the average consumption per cycle (ECPCAVE) was selected as the index to evaluate the fatigue cracking performance of asphalt mixtures. It is found that higher ECPCAVE, faster cumulative rate of fatigue damage causing a lower fatigue life and poor fatigue cracking performance of asphalt mixtures. The addition of RAP contributed to the increase of ECPCAVE and the cumulative rate of fatigue damage. The higher RAP contents, the faster the cumulative rate of fatigue damage was, which caused smaller fatigue life. This paper suggests that ECPCAVE is a useful indicator to evaluate the fatigue cracking performance of asphalt mixture with and without RAP.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Transport Systems and Technology

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. J. Xu, S. Huang, Y. Qin, Asphalt Pavement Recycling in Mainland China, Application of Reclaimed Asphalt Pavement and Recycled Asphalt Shingles in Hot-Mix Asphalt 51 (2014).
2. Review of very high-content reclaimed asphalt use in plant-produced pavements: state of the art10.1080/10298436.2014.893331 ↗
3. Improved mix design, evaluation, and materials management practices for hot mix asphalt with high reclaimed asphalt pavement content
4. Experimental study of recycled asphalt mixtures with high percentages of reclaimed asphalt pavement (RAP)10.1016/j.conbuildmat.2010.09.016 ↗
5. Performance grades, environmental and economic investigations of reclaimed asphalt pavement materials10.1016/j.jclepro.2018.11.126 ↗
6. A. Copeland, Reclaimed asphalt pavement in asphalt mixtures: State of the practice, 2011.
7. I.L. Al-Qadi, Q. Aurangzeb, S.H. Carpenter, W.J. Pine, J. Trepanier, Impact of high RAP contents on structural and performance properties of asphalt mixtures, 2012.
8. Application of a high percentage of reclaimed asphalt pavement in an asphalt mixture: blending process and performance investigation10.1080/14680629.2016.1182941 ↗
9. A comparison of rejuvenator and sryrene–butadiene rubber latex used in hot in-place recycling10.1080/14680629.2016.1142465 ↗
10. Laboratory performance of warm mix asphalt containing recycled asphalt mixtures10.1016/j.conbuildmat.2014.04.002 ↗
11. Fatigue resistance investigation of warm-mix recycled asphalt binder, mastic, and fine aggregate matrix
12. Huang · 2004
13. Laboratory evaluation of fatigue characteristics of recycled asphalt mixture10.1016/j.conbuildmat.2007.04.019 ↗
14. Performance characteristics of plant produced high RAP mixtures10.1080/14680629.2012.657070 ↗
15. Investigation of low-and high-temperature properties of plant-produced
16. Effect of reclaimed asphalt pavement (proportion and type) and binder grade on asphalt mixtures10.3141/2051-11 ↗
17. Evaluation of recycling agent dosage selection and incorporation methods for asphalt mixtures with high RAP and RAS contents10.1016/j.conbuildmat.2017.10.024 ↗
18. Sheng · 2005
19. ASTM, Standard test method for indirect tensile (IDT) strength of bituminous mixtures, (2007).
20. Characterization of Fatigue Damage of Hot Mix Asphalt Based on Residual Strength10.1061/(ASCE)MT.1943-5533.0001908 ↗
21. Research on the fatigue equation of asphalt mixtures based on actual stress ratio using semi-circular bending test10.1016/j.conbuildmat.2017.10.100 ↗
22. Fatigue damage model of stone matrix asphalt with polymer modified binder based on tensile strain evolution and residual strength degradation using digital image correlation methods10.1016/j.measurement.2018.03.037 ↗
23. Modelling of rheological and chemical properties of asphalt binder considering SARA fraction10.1016/j.fuel.2018.10.126 ↗
24. How to construct an asphalt binder master curve and assess the degree of blending between RAP and virgin binders10.1061/(ASCE)MT.1943-5533.0000726 ↗
25. Development of a new method for assessing asphalt binder durability with field validation
26. Evaluation of the relationship between asphalt binder properties and non-load related cracking
27. A simple fatigue performance model of asphalt mixtures based on fracture energy10.1016/j.conbuildmat.2011.07.001 ↗
28. Fracture properties of asphalt mixtures using semi-circular bending test: a state-of-the-art review and future research10.1016/j.conbuildmat.2015.12.046 ↗
29. Performance investigation and sustainability evaluation of multiple-polymer asphalt mixtures in airfield pavement10.1016/j.jclepro.2018.03.208 ↗
30. An evaluation of linear cumulative damage (Miner's Law) using kinetic crack growth theory10.1023/A:1021297914883 ↗
31. Probabilistic approaches for pavement fatigue cracking prediction based on cumulative damage using Miner’s law