journal article·2019-10

Unified fatigue characteristics model for cement-stabilized macadam under various loading modes

Songtao Lv, Chengdong Xia, Lingyun You, Xiaofeng Wang, Jianglong Li, Jianlong Zheng

Publisher page

Abstract

Abstract Cement-stabilized macadam is widely employed as a base-layer of pavement in China, because of its high strength and stiffness. However, fatigue cracking of the cement-stabilized macadam based pavement is prone to occur under multiple traffic loads, which affects the service life of the pavement. The main objective of this work is to reveal the fatigue characteristics of cement-stabilized macadam under various loading modes by developing a unified fatigue characteristics model. To this end, an unconfined compressive strength test, indirect tensile strength test, and four-point bending strength test were conducted for the cement-stabilized macadam samples under various loading rates. A power function was employed to the pattern of variation of strength with loading rates. The stress ratio of the fatigue test associated with the loading rate was obtained and defined as the rate-dependent stress ratio. Also, the fatigue tests under various loading modes were implemented based on the rate-dependent stress ratio and nominal stress ratio. The preliminary laboratory experimental results showed that it is challenging to compare fatigue performance under different loading modes based on nominal stress ratio. However, the problems of uncertainty and non-uniqueness of fatigue characteristics under various loading modes were resolved by employing the idea of rate-dependent stress ratio in the correlation analyses. Based on that, the new strength structure coefficient associated with the loading rate was proposed in this study. Therefore, the proposed research results provided the fundamental understanding of the fatigue resistance design of pavement with semi-rigid base-layer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Shear properties of asphalt mixtures under triaxial compression10.3390/app9071489 ↗
2. Fatigue equation for asphalt mixture under low temperature and low loading frequency conditions10.1016/j.conbuildmat.2019.03.312 ↗
3. Cold recycling of lime-fly ash stabilized macadam mixtures as pavement bases and subbases10.1016/j.conbuildmat.2018.03.030 ↗
4. Cracking resistance and mechanical properties of basalt fibers reinforced cement-stabilized macadam10.1016/j.compositesb.2018.11.115 ↗
5. Strength assessment and mechanism analysis of cement stabilized reclaimed lime-fly ash macadam10.1016/j.conbuildmat.2018.01.139 ↗
6. Mechanical properties of cement-treated aggregate material – a review10.1016/j.matdes.2011.04.055 ↗
7. Physical and chemical behavior of four cement-treated aggregates10.1061/(ASCE)0899-1561(2007)19:10(891) ↗
8. Influence of chemical additives on mixing procedures and performance properties of asphalt emulsion recycled mixture with reclaimed cement-stabilized macadam10.1016/j.conbuildmat.2016.05.050 ↗
9. Characteristics of dry shrinkage and temperature shrinkage of cement-stabilized steel slag10.1016/j.conbuildmat.2016.12.214 ↗
10. Fatigue equation of cement-treated aggregate base materials under a true stress ratio10.3390/app8050691 ↗
11. Fatigue performances of semi-rigid base course materials
12. Characteristics of water-foamed asphalt mixture under multiple freeze-thaw cycles: laboratory evaluation10.1061/(ASCE)MT.1943-5533.0002474 ↗
13. Effect of anisotropic characteristics on the mechanical behavior of asphalt concrete overlay10.1007/s11709-018-0476-4 ↗
14. Analytical solution for the effect of anisotropic layers/ interlayers on an elastic multi-layered medium subjected to moving load10.1016/j.ijsolstr.2019.05.021 ↗
15. Normalization of fatigue characteristics for asphalt mixtures under different stress states10.1016/j.conbuildmat.2018.05.109 ↗
16. Fatigue damage characteristics considering the difference of tensile-compression modulus for asphalt mixture10.1520/JTE20170114 ↗
17. Strength and fatigue performance for cement-treated aggregate base materials
18. The bending fatigue performance of cement-stabilized aggregate reinforced with polypropylene filament fiber10.1016/j.conbuildmat.2015.02.073 ↗
19. Analysis on the fatigue properties of vertical vibration compacted lime–fly ash-stabilized macadam10.1016/j.conbuildmat.2017.08.057 ↗
20. Impact of interlayer on the anisotropic multi-layered medium overlaying viscoelastic layer under axisymmetric loading10.1016/j.apm.2018.05.020 ↗
21. Investigation of adhesion and interface bond strength for pavements underlying chip-seal: Effect of asphalt-aggregate combinations and freeze-thaw cycles on chip-seal10.1016/j.conbuildmat.2019.01.058 ↗
22. Nussbaum · 1965
23. Fatigue damage analysis of cement-stabilized base under construction loading10.3390/app8112263 ↗
24. Fatigue performance of cement-stabilized macadam mixture
25. Fatigue performance of emulsified asphalt cement stabilized macadam
26. Fatigue performance and application of cement stabilized macadam shaped with vertical vibration test method
27. Analysis on the influences of material composition on semi-rigid base fatigue property
28. Standardization of fatigue characteristics of cement-treated aggregate base materials under different stress states10.3390/app8091500 ↗
29. (JTG E30-2005) Test Methods of Cement and Concrete for Highway Engineering Renmin Communication Press, China, 2005.
30. (JTG E42-2005) Test Methods of Aggregate for Highway Engineering, China Communications Press, China, 2005.
31. (JTG E51-2009) Test Methods of Materials Stabilized with Inorganic Binders for Highway Engineering Renmin Communication Press, China, 2009.
32. Continuum damage mechanics: present state and future trends10.1016/0029-5493(87)90225-1 ↗
33. (JTG D50-2017)Specifications for Design of Highway Asphalt Pavement, Renmin Communication Press, China, 2017.