Dynamic behaviour of adobe bricks in compression: The role of fibres and water content at various loading rates
Source abstract
Abstract
This paper presents the results of an experimental research aimed at assessing the material performance of adobe bricks in compression for a wide range of induced strain rates, from statics to high velocity impact. Adobe connotes a traditional masonry whose bricks are made of sundried soil mixtures possibly reinforced with natural fibres and joined together using mud mortar. The inclusion of fibre and the presence of water in the mixture have a dominant effect on the mechanical performance of adobe bricks and masonry. Their influence on the dynamic behaviour of this material is quantified and interpreted in this study at high strain rates also with data produced through Hopkinson bar testing. Appropriate dynamic increase factors and constitutive equations for adobe materials in dynamics are also investigated. The paper presents the experimental campaign, shows the main results and offers qualitative and quantitative interpretations for the principal damage patterns observed. © 2019 The Author(s)
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Masonry and Concrete Structural Analysis · Hygrothermal properties of building materials · Building materials and conservation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (79)
Show source-provided references
1. https://ec.europa.eu/jrc/en/research/commission-priorities (2018).
2. Li Piani · 2017
3. The visibility of (in)security: the aesthetics of planning urban defences against terrorism10.1177/0967010609343299 ↗
4. Structural design and the social function of space as vulnerability factor and solution to the progression of the terrorist threat in urban environments (italian)
5. Dynamic behavior of concrete at high strain rates and pressures: I. Experimental characterization10.1016/S0734-743X(01)00020-3 ↗
6. Brittle materials at high-loading rates: an open area of research10.1098/rsta.2016.0436 ↗
7. Pedersen · 2010
8. Blast response of lightly attached concrete masonry units walls10.1061/(ASCE)0733-9445(2005)131:8(1186) ↗
9. Experimental study of dynamic material properties of clay brick and mortar at different strain rates10.1080/13287982.2008.11464992 ↗
10. Further investigation on the dynamic compressive strength enhancement of concrete-like materials based on split Hopkinson pressure bar tests. Part II: numerical simulations10.1016/j.ijimpeng.2009.04.010 ↗
11. Impact behavior of plain concrete loaded in uniaxial compression10.1061/(ASCE)0733-9399(1995)121:6(685) ↗
12. Numerical derivation of homogenized dynamic masonry material properties with strain rate effects10.1016/j.ijimpeng.2008.02.005 ↗
13. Dynamic properties of clay brick at different strain rates, Proc. of the 12th
14. M. Larcher, M. Peroni, G. Solomos, N. Gebbeken, P. Bieber, J. Wandelt, N.T. Tran, Dynamic Increase Factor of Masonry Materials: Experimental Investigations, 2013.
15. Mechanical properties of adobe bricks in ancient constructions10.1016/j.conbuildmat.2011.08.046 ↗
16. The properties of adobe
17. Seismic analysis by macroelements of fujian hakka tulous, chinese circular earth constructions listed in the UNESCO world heritage list
18. Adobe masonry in current society: material performance under extreme events ( https://www.youtube.com/watch?v=2mxwoS9vFlw) (2018).
19. Influence of the testing procedures in the mechanical characterization of adobe bricks10.1016/j.conbuildmat.2012.11.058 ↗
20. The mechanical performance of traditional adobe masonry components: an experimental-analytical characterization of soil bricks and mud mortar10.3992/1943-4618.13.3.17 ↗
21. Prolonging the life of earth buildings in the tropics10.1080/09613217308550234 ↗
22. Earth construction: lessons from the past for future eco-efficient construction10.1016/j.conbuildmat.2011.10.054 ↗
23. Unfired clay bricks – moisture properties and compressive strength
24. Static properties and impact resistance of a green ultra-high performance hybrid fibre reinforced concrete (UHPHFRC): experiments and modeling10.1016/j.conbuildmat.2014.06.033 ↗
25. Influence of natural fibers characteristics on the interface mechanics with cement based matrices10.1016/j.compositesb.2017.12.016 ↗
26. Compressive behaviour of concrete at high strain rates10.1007/BF02472016 ↗
27. EN 772-1:2000, Methods of test of masonry units: determination of compressive strength.
28. BS 1377-2: 1990, Methods of test for soils for civil engineering purposes, Classification tests.
29. NT Build 333: Bricks and masonry blocks: Moisture content (1988).
30. Vegt · 2016
31. Development of a Hopkinson bar apparatus for testing soft materials: application to a closed-cell aluminum foam10.3390/ma9010027 ↗
32. Dynamic finite element analysis of earth masonry structures based on experimental material data
33. Cosenza · 2007
34. High strain rate response of rocks under dynamic loading using split hopkinson pressure bar10.1007/s10706-017-0345-2 ↗
35. Dynamic characterization of adobe in compression: the effect of fibre fraction in soil matrix
36. Masonry under dynamic actions: experimental investigations, material modeling and numerical simulations
37. Numerical study on craters and penetration of concrete slab by ogive-nose steel projectile10.1016/j.compgeo.2006.09.001 ↗
38. CEB (Comite Euro-International du Beton): CEB-FIP Model Code (1990).
39. Modelling of compressive behaviour of concrete-like materials at high strain rate10.1016/j.ijsolstr.2008.04.002 ↗
40. Evaluation of dynamic increase factor models for steel fibre reinforced concrete10.1016/j.conbuildmat.2018.09.085 ↗
41. Effect of high strain rate loading on compressive behaviour of fibre-reinforced high-strength concrete10.1680/macr.2011.63.11.813 ↗
42. Static and dynamic compressive properties of ultra-high performance concrete (UHPC) with hybrid steel fiber reinforcements10.1016/j.cemconcomp.2017.02.010 ↗
43. Experimental and modeling study of dynamic mechanical properties of cement paste, mortar and concrete10.1016/j.conbuildmat.2013.05.063 ↗
44. Stochastic approach to study the influence of rate of loading on strength of concrete
45. Effects of strain rate on concrete strength subjected to impact load-Dynamic compressive strength test by Split Hopkinson Pressure Bar method
46. Stress-strain characteristics of clay brick masonry under uniaxial compression10.1061/(ASCE)0899-1561(2007)19:9(728) ↗
47. Stress strain behaviour of concrete confined by overlapping hoops at low and high strain rates
48. Modelling the mechanical response of adobe components under uniaxial loading10.4028/www.scientific.net/KEM.774.650 ↗
49. Flexural members with confined concrete
50. Adobe bricks under compression: experimental investigation and derivation of stress – strain equation10.1016/j.conbuildmat.2013.11.103 ↗
51. The Adobe delta damage model: a locally regularized rate-dependent model for the static assessment of soil masonry bricks and mortar10.1016/j.engfracmech.2018.11.026 ↗
52. Ballistic model for the prediction of penetration depth and residual velocity in adobe: a new interpretation of the ballistic resistance of earthen masonry10.1016/j.dt.2018.07.017 ↗
53. A review of stress strain relationships for concrete
54. numerical approach to the complete stress strain curve of concrete10.1016/0008-8846(73)90096-3 ↗
55. A strain-rate-dependent concrete material model for ADINA10.1016/S0045-7949(97)00018-7 ↗
56. Microstructure and physical properties of lime-clayey adobe bricks10.1016/j.conbuildmat.2007.09.002 ↗
57. Versuche über die scheinbare adhäsion, Sitzungs- berichte der Kaiserlichen Akademie der Wissenschaften
58. A physical phenomenon which can explain the mechanical behaviour of concrete under high strain rates10.1007/BF02472015 ↗
59. Triaxial behavior of concrete subjected to dynamic compression10.1061/(ASCE)ST.1943-541X.0000686 ↗
60. Effect of strain rate on cement mortar under compression, studied by electrical resistivity measurement10.1016/S0008-8846(01)00753-0 ↗
61. Strain-rate effect on the tensile behaviour of concrete at different relative humidity levels10.1007/BF02482196 ↗
62. Microstructure of a compacted silt10.1139/t96-030 ↗
63. Microstructure and chemical degradation of adobe and clay bricks10.1016/j.ceramint.2008.01.026 ↗
64. The structure of compacted clay
65. Morandi · Constr. Build. Mater. · 2018 · 190 · 59310.1016/j.conbuildmat.2018.09.070 ↗
66. Effect of reinforcing wool fibres on fracture and energy absorption properties of an earthen material10.1016/j.conbuildmat.2011.08.008 ↗
67. H. Singh, Steel Fiber Reinforced Concrete: Behavior, Modelling and Design – Chapter 2: Material Models, vol. 25, 2017. https://doi.org/10.1617/s11527-010-9596-6. URL:http://www.jsce.or.jp/committee/concrete/e/newsletter/newsletter05/JSCE-VIFCEA Joint Seminar Papers.htm%0Ahttp://pubsindex.trb.org/view.aspx?id=25485.
68. Model for localization of softening and size effect
69. A reconciliation of dynamic crack velocity and Rayleigh wave speed in isotropic brittle solids10.1007/BF00032282 ↗
70. Effect of strain rate and water-to-cement ratio on compressive mechanical behavior of cement mortar10.1007/s11771-015-2620-9 ↗
71. An experimental investigation into dynamic fracture: I Crack initiation and arrest
72. The effects of the fiber contents on the mechanic properties of the adobes10.1016/j.conbuildmat.2006.08.022 ↗
73. Pore size distribution and compressive strength of waste clay brick mortar10.1016/S0958-9465(00)00070-6 ↗
74. Experimental characterization of Italian composite adobe bricks reinforced with straw fibers10.1016/j.compstruct.2014.11.060 ↗
75. Mechanical behavior of fiber-reinforced high-strength concrete subjected to high strain-rate compressive loading10.1016/j.conbuildmat.2011.12.083 ↗
76. Effectiveness of new natural fibers on damage-mechanical performance of mortar10.1016/j.conbuildmat.2017.07.072 ↗
77. Characterization of macrocrack propagation under sustained loading in steel fibre reinforced concrete10.1617/s11527-015-0552-3 ↗
78. Fracture behaviour of a fibre reinforced earthen material under static and impact flexural loading10.1016/j.conbuildmat.2016.01.046 ↗
79. Thermal behaviour of adobe constructions10.1016/j.buildenv.2005.07.021 ↗