journal article·2020-09

Mechanical and radiation shielding properties of concrete reinforced with boron-basalt fibers using Digital Image Correlation and X-ray micro-computed tomography

Łukasz Skarżyński

Publisher page

Abstract

Abstract The paper presents experimental investigations of the radiation shielding, mechanical and fracture properties of concrete reinforced with 5 kg/m3 of novel basalt fibers infused with boron oxide (BBF). However, further studies concerning other dosages i.e. 1 kg/m3, 10 kg/m3, 15 kg/m3 and 20 kg/m3 are currently carried out. Experiments with neutron source revealed that addition of BBF as a dispersed concrete reinforcement could improve the neutron radiation shielding of plain concrete by up to 25%. On the basis of mechanical tests, it turned out that compressive strength, tensile splitting strength and flexural of concrete reinforced with BBF were lower by up to 15% than analogous values for plain concrete. Simultaneously, shrinkage strain of BBF concrete was lower by about 10% than of plain concrete. Fracture process zone development on the surface of samples was investigated by Digital Image Correlation (DIC) using camera with the 36 megapixel matrix that allowed to obtain pixel size of 18 µm resulting in the length resolution equal approximately 60 pixel/mm whereas analyses of 3D material micro-structure, air voids, width and curvature of crack were carried out by X-ray micro-computed tomography (micro-CT) with 0.2 mm brass filter, voltage and the current equal 130 keV and 61 µA, respectively. The voxel size of the X-ray micro-CT was 39.68 µm. Experiments revealed that basalt fibers infused with boron oxide as a concrete dispersed reinforcement improved the ability of limiting micro-cracking area and bridging macro-cracking by up to 28%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Radiation Shielding Materials Analysis · Geophysical Methods and Applications · Rock Mechanics and Modeling

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. A comparative study of the attenuation of reactor thermal neutrons in different types of concrete10.1016/0306-4549(95)00122-0 ↗
2. The effect of barite rate on some physical and mechanical properties of concrete10.1016/j.msea.2006.02.033 ↗
3. Cracking effect on gamma-ray shielding performance in concrete structure10.1016/j.pnucene.2007.01.006 ↗
4. Development of special radiation shielding concretes using natural local materials and evaluation of their shielding characteristics10.1016/j.pnucene.2007.10.004 ↗
5. The effect of the initial water to cement ratio on shielding properties of ordinary concrete10.1016/j.pnucene.2009.11.005 ↗
6. Review on the addition compounds to radiation shielding concrete10.1016/j.pnucene.2010.09.012 ↗
7. Determining the gamma and neutron shielding characteristics of concretes containing different hematite proportions10.1016/j.anucene.2011.08.010 ↗
8. Reusable shielding material for neutron- and gamma-radiation10.1016/j.nima.2010.12.239 ↗
9. Effect of gamma and lead as an additive material on the resistance and strength of concrete10.1016/j.nucengdes.2011.03.001 ↗
10. Application of heavy concretes to the shielding materials of synchrotron radiation beamlines10.1016/j.radmeas.2011.03.002 ↗
11. Mix design effective parameters on γ-ray attenuation coefficient and strength of normal and heavyweight concrete10.1016/j.conbuildmat.2011.08.043 ↗
12. Radiation distribution through serpentine concrete using local materials and its application as a reactor biological shield10.1016/j.anucene.2012.05.008 ↗
13. Bažant · 1997
14. 3D lattice type fracture model for concrete10.1016/S0013-7944(02)00158-3 ↗
15. Modelling of concrete fracture at aggregate level using FEM and DEM based on X-ray μCT images of internal structure10.1016/j.engfracmech.2015.08.010 ↗
16. The use of basalt, basalt fibers and modified graphite for nuclear waste repository
17. Radiation shielding properties of high performance concrete reinforced with basalt fibers infused with natural and enriched boron10.1016/j.nucengdes.2016.12.029 ↗
18. Radiation shielding properties of novel cement-based mixture for nuclear applications10.1016/j.nucengdes.2014.12.007 ↗
19. Digital image correlation analysis of interfacial debonding properties and fracture behavior in concrete10.1016/j.engfracmech.2006.01.035 ↗
20. An experimental investigation on the FPZ properties in concrete using digital image correlation technique10.1016/j.engfracmech.2011.08.016 ↗
21. Monitoring size effect on crack opening in concrete by Digital Image Correlation10.1080/19648189.2012.672211 ↗
22. Assessment of digital image correlation measurement errors: methodology and results10.1007/s11340-008-9204-7 ↗
23. Improved 3D image correlation for surface displacement measurement10.1117/1.600624 ↗
24. Calculations of fracture process zones on meso-scale in notched concrete beams subjected to three-point bending10.1016/j.euromechsol.2010.02.008 ↗
25. Experimental investigations of fracture process using DIC in plain and reinforced concrete beams under bending10.1111/str.12064 ↗
26. Application of DIC technique to concrete – study on objectivity of measured surface displacements10.1007/s11340-013-9781-y ↗
27. Full-field strain measurements at the micro-scale in fiber-reinforced composites using digital image correlation10.1016/j.compstruct.2015.12.020 ↗
28. Flexural cracking behaviour of normal strength, high strength and high strength fiber concrete beams using Digital Image Correlation technique10.1016/j.conbuildmat.2015.12.166 ↗
29. X-ray computed tomography harnessed to determine 3D spacing of steel fibers in self compacting (SCC) slabs10.1016/j.conbuildmat.2014.10.024 ↗
30. Determination of steel fibres distribution in self-compacting concrete beams using X-ray computed tomography10.1016/j.acme.2014.08.008 ↗
31. Observation of steel fibers in concrete with computed tomography10.1016/j.conbuildmat.2017.02.114 ↗
32. 3D numerical study on fracture process of concrete with different ITZ properties using X-ray computerized tomography10.1016/j.ijsolstr.2018.05.026 ↗
33. DEM simulations of fracture in concrete under uniaxial compression based on its real internal structure10.1177/1056789517690915 ↗
34. Mechanical and fracture properties of concrete reinforced with recycled and industrial steel fibers using Digital Image Correlation technique and X-ray micro computed tomography10.1016/j.conbuildmat.2018.06.182 ↗
35. Crack evolution in concrete compressive fatigue experiments based on X-ray micro-CT images10.1016/j.ijfatigue.2019.02.002 ↗
36. Detection and segmentation of mechanical damage in concrete with X-ray microtomography10.1016/j.matchar.2018.06.018 ↗
37. CT-Scan study of crack patterns of fiber-reinforced concrete loaded monotonically and under low-cycle fatigue10.1016/j.ijfatigue.2018.05.011 ↗
38. Computed tomography scanning of the internal microstructure, crack mechanisms and structural behaviour of fiber-reinforced concrete under static and cyclic bending tests10.1016/j.ijfatigue.2018.11.023 ↗
39. Experimental investigations of damage evolution in concrete during bending by continuous micro-CT scanning10.1016/j.matchar.2019.05.034 ↗
40. Analysis of the tensile fracture properties of ultra-heigh-strength fiber-reinforced concrete with different types of steel fibers by X-ray tomography10.1016/j.matdes.2019.107582 ↗
41. EN 12390-3:2009 Testing Hardened Concrete – Part 3: Compressive Strength of Test Specimens.
42. EN 12390-6:2011 Testing Hardened Concrete – Part 6: Tensile Splitting Strength of Test Specimens.
43. EN 14651:2005+A1:2007 Test Method for Metallic Fiber Concrete. Measuring the Flexural Tensile Strength (Limit of Proportionality (LOP), Residual).
44. EN 12390-2:2009 Testing Hardened Concrete – Part 2: Making and curing specimens for Strength tests.
45. Instrukcja ITB 194/98 Badanie cech mechanicznych betonu na próbkach wykonanych w formach (in polish).
46. Quality assessment of speckle patterns for digital image correlation10.1016/j.optlaseng.2005.10.004 ↗
47. Study on subset size selection in digital image correlation for spackle patterns10.1364/OE.16.007037 ↗
48. Determination of 3D porosity in steel fibre reinforced SCC beams using X-ray computed tomography10.1016/j.conbuildmat.2014.06.064 ↗
49. Experimental and numerical investigation of influence of air-voids on the compressive behaviour of foamed concrete10.1016/j.matdes.2017.05.054 ↗
50. Effect of steel fiber reinforcement on fresh mix properties of concrete
51. Multi-physical properties of a structural concrete incorporating short flax fibers10.1016/j.conbuildmat.2017.02.124 ↗
52. Influence of steel and macro-synthetic fibers on concrete properties
53. Properties of fiber reinforced concrete: workability, behaviour under long-term loading and air-void characteristics
54. Modeling the effect of material composition on the tensile properties of concrete. Understanding the tensile properties of concrete