journal article·2020-11

Experimental study on compressive properties of SFRC under high strain rate with different fiber content and aspect ratio

Lin Liao, Jian Zhao, Fan Zhang, Shiqiang Li, Zhihua Wang

Publisher page

Abstract

Abstract The dynamic mechanical properties of steel fiber reinforced concrete (SFRC) depend largely on the content and size of steel fibers. This paper presents an experimental study on mechanical properties of SFRC under high strain-rate compressive loading. In order to explore the co-effect of the fiber content and aspect ratio on the dynamic performance of SFRC, the SFRC specimens with three kinds of fiber aspect ratio (30, 50, 60, respectively) and six kinds of fiber content (0%, 0.5%, 1.0%, 1.5%, 2.0% and 2.5% in volume fraction) were tested by Split Hopkinson Pressure Bar (SHPB) device with a diameter of 75 mm. The test strain rate ranged from 30 s−1 to 370 s−1. Test results show that SFRC has obvious strain rate effect. With the same fiber aspect ratio, the optimum fiber content of SFRC shows strain rate sensitivity. And with the increase of fiber content, the dynamic increase factor (DIF) of SFRC decrease gradually. With the same fiber content, SFRC with a fiber aspect ratio of 50 shows the maximum compressive strength at different strain rates. In addition, the study also proposed the expression of DIF, strain rate and fiber content of SFRC to each fiber aspect ratio.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Innovative concrete reinforcement materials · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Cement and concrete as an engineering material: an historic appraisal and case study analysis10.1016/j.engfailanal.2014.02.004 ↗
2. Numerical study of the effect of ITZ on the failure behaviour of concrete by using particle element modelling10.1016/j.conbuildmat.2018.03.040 ↗
3. Neville · 2012
4. Reorientation of short steel fibres during the flow of self-compacting concrete mix and determination of the fibre orientation factor10.1016/j.cemconres.2013.10.002 ↗
5. Singh · 2017
6. Numerical study of dynamic behavior of concrete by meso-scale particle element modeling10.1016/j.ijimpeng.2011.07.004 ↗
7. Stress-strain curves for steel-fiber reinforced concrete under compression10.1016/S0958-9465(99)00021-9 ↗
8. Reproportioning of steel fibre reinforced concrete mixes and their impact resistance10.1016/j.cemconres.2005.06.011 ↗
9. Numerical simulation of ultra high performance fibre reinforced concrete panel subjected to blast loading10.1016/j.ijimpeng.2013.10.003 ↗
10. Mesoscale modelling of dynamic tensile behaviour of fibre reinforced concrete with spiral fibres10.1016/j.cemconres.2012.07.006 ↗
11. Stress–strain relationship of steel fiber-reinforced concrete under dynamic compression10.1016/j.conbuildmat.2007.01.005 ↗
12. Using Hopkinson pressure bar to perform dynamic tensile tests on SFRC at medium strain rates10.1680/macr.11.00076 ↗
13. Three-dimensional modelling of steel fiber reinforced concrete material under intense dynamic loading10.1016/j.conbuildmat.2013.02.067 ↗
14. Investigation on the relationship between the steel fibre distribution and the post-cracking behaviour of SFRC10.1016/j.conbuildmat.2018.12.081 ↗
15. Effect of aspect ratio and volume fraction of steel fiber on the mechanical properties of SFRC10.1016/j.conbuildmat.2006.05.025 ↗
16. Complementary use of inductive test and bending test for the characterization of SFRC10.4028/www.scientific.net/AMM.580-583.2213 ↗
17. The effect of fibre distribution characteristics on the flexural strength of steel fibre-reinforced ultra-high strength concrete10.1016/j.conbuildmat.2010.11.057 ↗
18. The relation between fiber orientation and tensile behavior in an ultra high performance fiber reinforced cementitious composites (UHPFRCC)10.1016/j.cemconres.2011.05.009 ↗
19. Influence of steel fibres on strength and ductility of normal and lightweight high strength concrete10.1016/S0360-1323(01)00109-3 ↗
20. Experimental and analytical study of the fibre distribution in SFRC: A comparison between image processing and the inductive test10.1016/j.compstruct.2018.01.006 ↗
21. Assessment of fibre orientation in ultra high performance fibre reinforced concrete and its effect on flexural strength10.1617/s11527-009-9562-3 ↗
22. Standard test method for flexural toughness of fiber reinforced concrete (using centrally loaded round panel), American Society for Testing and Materials, West Conshohocken, PA, USA. (2003).
23. T.T. Le, M.N. Soutsos, S.G. Millard, S.J. Barnett, UHPFRC—optimisation of mix proportions, Proceedings of concrete Platform, Belfast. (2007) 339–348.
24. Impact resistance of steel fibrous concrete containing fibres of mixed aspect ratio10.1016/j.conbuildmat.2008.01.002 ↗
25. The pull-out behavior of straight and hooked-end steel fiber from hybrid fiber reinforced cementitious composite: Experimental study and analytical modelling10.1016/j.compstruct.2018.08.066 ↗
26. Fatigue Behavior of Steel-Fiber-Reinforced Concrete Beams10.1061/(ASCE)ST.1943-541X.0001074 ↗
27. ACI COMMITTEE 544,4R-88, Design considerations for steel fiber reinforced concrete, ACI Structural Journal. 85(5) (1988) 563–579.10.14359/3144 ↗
28. Z.S. Wang, T.S. Cheng, W.G. Zhang, Experimental study and engineering application of steel fiber reinforced concrete in airport pavement, Proceedings of the 5th National Conference on Fiber Reinforced Cement and Concrete. (1994) 363-387. (In Chinese).
29. Effect of rate of application of load on the compressive strength of concrete
30. Dynamic strength of polymer modified and fiber-reinforced concretes10.1016/0008-8846(77)90032-1 ↗
31. Dynamic mechanical properties of cement and asphalt mortar based on SHPB test10.1016/j.conbuildmat.2014.07.092 ↗
32. Using the split Hopkinson pressure bar to investigate the dynamic behavior of SFRC10.1680/macr.2003.55.2.183 ↗
33. Impact response of steel fiber-reinforced concrete using a split hopkinson pressure bar10.1061/(ASCE)0899-1561(2004)16:1(54) ↗
34. Dynamic compressive behavior of spiral steel fibre reinforced concrete in split Hopkinson pressure bar tests10.1016/j.conbuildmat.2013.07.022 ↗
35. Experimental confirmation of some factors influencing dynamic concrete compressive strengths in high-speed impact tests10.1016/j.cemconres.2013.05.008 ↗
36. Yu. Su, Jun. Li, C.Q Wu, P.T. Wu, Z.X. Li. Effects of steel fibres on dynamic strength of UHPC. Constr. Build. Mater., 114 (2016) 708-718.10.1016/j.conbuildmat.2016.04.007 ↗
37. Stress–strain relationship of high-strength steel fibre reinforced concrete in compression
38. Experimental and numerical analysis on effect of fibre aspect ratio on mechanical properties of SRFC10.1016/j.conbuildmat.2009.09.009 ↗
39. A study of strain-rate effect and fiber reinforcement effect on dynamic behavior of steel fiber-reinforced concrete10.1016/j.conbuildmat.2017.09.093 ↗
40. M. Pająk, Dynamic response of SFRC under different strain rates–an overview of test results, 7th International Conference Analytical Models and New Concepts in Concrete and Masonry Structures, Kraków, Poland. (2011).
41. Mechanical behavior of fiber-reinforced high-strength concrete subjected to high strain-rate compressive loading10.1016/j.conbuildmat.2011.12.083 ↗
42. Dynamic compressive response of high-performance fiber-reinforced cement composites10.1016/j.conbuildmat.2020.118738 ↗
43. Bentur · 1990 · 444
44. Two-dimensional analysis of the SHPB system10.1016/0022-5096(75)90008-3 ↗
45. Standard for test method of mechanical properties on ordinary concrete, Architecture & Building Press, Beijing, China. (2003) 12-13. (In Chinese).
46. Compressive behavior of concrete at high strain rates10.1007/BF02472016 ↗
47. Effect of steel fiber content and type on dynamic compressive mechanical properties of UHPCC10.1016/j.conbuildmat.2017.12.203 ↗
48. Experimental study on the effect of strain rates on the dynamic flexural properties of rubber concrete10.1016/j.conbuildmat.2019.07.084 ↗