A novel approach toward reducing energy consumption and promoting electromagnetic interference shielding efficiency in the buildings using Brick/polyaniline nanocomposite
Source abstract
Abstract
Abstract In this research, a complementary approach was presented to prepare building materials, improving shielding and energy efficiency. Accordingly, a macroporous Brick was constructed and coated by the polyaniline (PANi) film using an innovative route. Diverse analyses were applied, attesting Brick/PANi composite has been synthesized. The results of the diffuse reflection spectroscopy (DRS) analysis illustrated that the intensity of the light absorption in UV–Vis-NIR region was dramatically diminished for Brick/PANi, suggesting the nanocomposite for improving energy efficiency. Noticeably, the bandgap was augmented to 3.7 eV when Brick was coated by PANi. The warming samples were monitored using infrared thermometer under the near-infrared (NIR) light. Interestingly, the obtained results exhibited that the warming Brick/PANi nanocomposite was more time-consuming compared to Brick. More significantly, differential scanning calorimetry (DSC) thermograms attested that Brick/PANi nanocomposite needs lower energy to augment its temperature due to the coated PANi film (12 μm). The obtained results manifest that the reflection of NIR light from interface of PANi film plays the vital role in thermal behavior of Brick/PANi nanocomposite. Finally, Brick exposed significant shielding efficiency (SE) originated by its macroporous structure reinforcing interfacial polarization and the coated PANi film ascended its SE properties. The obtained results clarified that Brick/PANi nanocomposite has shielded more than 59% of the electromagnetic waves at x-band, which was mainly generated by relaxation and conductive loss produced by coated PANi and developed functional groups. More significantly, the absorption played vital role bringing SE of the samples, emphasizing the importance of the presented research.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electromagnetic wave absorption materials · Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (77)
Show source-provided references
1. Review of passive PCM latent heat thermal energy storage systems towards buildings’ energy efficiency10.1016/j.enbuild.2012.12.042 ↗
2. Phase change materials and thermal energy storage for buildings10.1016/j.enbuild.2015.06.007 ↗
3. J. Shi, X. Huang, H. Guo, X. Shan, Z. Xu, X. Zhao, Z. Sun, W. Aftab, C. Qu, R. Yao, Experimental investigation and numerical validation on the energy-saving performance of a passive PCM floor for a real scale building, (2018).
4. W. Liao, A. Kumar, K. Khayat, H. Ma, Multifunctional Lightweight Aggregate Containing Phase Change Material and Water for Damage Mitigation of Concrete, (2019).
5. Polyethylene glycol/carbon black shape-stable phase change composites for peak load regulating of electric power system and corresponding thermal energy storage
6. A review of porous lightweight composite materials for electromagnetic interference shielding10.1016/j.compositesb.2018.05.027 ↗
7. MOF-derived yolk-shell Ni@ C@ ZnO Schottky contact structure for enhanced microwave absorption
8. A facile fabrication and highly tunable microwave absorption of 3D flower-like Co3O4-rGO hybrid-architectures10.1016/j.cej.2018.01.152 ↗
9. Wire-in-tube ZnO@ carbon by molecular layer deposition: accurately tunable electromagnetic parameters and remarkable microwave absorption
10. Tunable microwave absorption frequency by aspect ratio of hollow polydopamine@ α-MnO2 microspindles studied by electron holography10.1021/acsami.6b00978 ↗
11. Multifunctional cement-based materials modified with electrostatic self-assembled CNT/TiO2 composite filler10.1016/j.conbuildmat.2019.117787 ↗
12. Advancements in electromagnetic interference shielding cementitious composites10.1016/j.conbuildmat.2019.117116 ↗
13. Self-assembly constructing WS2-rGO architecture with green EMI shielding
14. Electromagnetic interference shielding using continuous carbon-fiber carbon-matrix and polymer-matrix composites10.1016/S1359-8368(98)00065-1 ↗
15. Electromagnetic interference shielding mechanisms of CNT/polymer composites10.1016/j.carbon.2009.02.030 ↗
16. Hybrid composite mats composed of amorphous carbon, zinc oxide nanorods and nickel zinc ferrite for tunable electromagnetic interference shielding10.1016/j.compositesb.2019.01.060 ↗
17. Enhanced electromagnetic interference shielding of carbon fiber/cement composites by adding ferroferric oxide nanoparticles10.1016/j.conbuildmat.2017.06.017 ↗
18. Graphene oxide-deposited carbon fiber/cement composites for electromagnetic interference shielding application10.1016/j.conbuildmat.2015.03.050 ↗
19. Synergistic effect of MWNT/fly ash incorporation on the EMI shielding/absorbing characteristics of cementitious materials10.1016/j.conbuildmat.2016.04.082 ↗
20. An overview of electrically conductive polymer nanocomposites toward electromagnetic interference shielding
21. Recent progress on the metacompoistes with carbonaceous fillers
22. Overview of carbon nanostructures and nanocomposites for electromagnetic wave shielding10.1016/j.carbon.2018.09.006 ↗
23. Investigating the effects of metallic submicron and nanofilms on fiber-reinforced composites for lightning strike protection and EMI shielding
24. Multifunctions of polymer nanocomposites: environmental remediation, electromagnetic interference shielding, and sensing applications10.1002/cnma.201900588 ↗
25. A highly porous polyaniline-graphene composite used for electrochemical supercapacitors
26. Laccase immobilized polyaniline/magnetic graphene composite electrode for detecting hydroquinone10.1016/j.ijbiomac.2020.01.248 ↗
27. Fabrication of pH-electroactive bacterial cellulose/polyaniline hydrogel for the development of a controlled drug release system
28. Extraordinary rate capability achieved by a 3D “skeleton/skin” carbon aerogel–polyaniline hybrid with vertically aligned pores10.1039/C7CC00121E ↗
29. Solid polyaniline dendrites consisting of high aspect ratio branches self-assembled using sodium lauryl sulfonate as soft templates: synthesis and electrochemical performance10.1016/j.polymer.2019.121808 ↗
30. High-performance engineered conducting polymer film towards antimicrobial/anticorrosion applications
31. Intracellular polymer substances induced conductive polyaniline for improved methane production from anaerobic wastewater treatment10.1021/acssuschemeng.8b05847 ↗
32. Triple layered core–shell ZVI@ carbon@ polyaniline composite enhanced electron utilization in Cr (vi) reduction10.1039/C8TA03066A ↗
33. Bacteria cell templated porous polyaniline facilitated detoxification and recovery of hexavalent chromium10.1039/C8TA06571C ↗
34. Biomass-derived nitrogen-doped porous carbons (NPC) and NPC/ polyaniline composites as high performance supercapacitor materials
35. Facile synthesis of Fe@ Fe3C/C nanocomposites derived from bulrush for excellent electromagnetic wave-absorbing properties10.1021/acssuschemeng.9b02913 ↗
36. Extremely facile and green synthesis of magnetic carbon composites drawn from natural bulrush for electromagnetic wave absorbing
37. Bio-gel derived nickel/carbon nanocomposites with enhanced microwave absorption10.1039/C8TC02127A ↗
38. Achieving superior electromagnetic wave absorbers through the novel metal-organic frameworks derived magnetic porous carbon nanorods10.1016/j.carbon.2019.01.028 ↗
39. In-situ pyrolyzed polymethylsilsesquioxane multi-walled carbon nanotubes derived ceramic nanocomposites for electromagnetic wave absorption10.1016/j.ceramint.2019.03.052 ↗
40. Ultrathin high-performance electromagnetic wave absorbers with facilely fabricated hierarchical porous Co/C crabapples10.1039/C8TC04984J ↗
41. Strengthened electromagnetic absorption performance derived from synergistic effect of carbon nanotube hybrid with Co@ C beads10.1007/s42114-017-0008-z ↗
42. Tailoring Ti3C2Tx nanosheet to tune local conductive network as an environmentally friendly material for highly efficient electromagnetic interference shielding
43. Flexible silver nanowire/carbon fiber felt metacomposites with weakly negative permittivity behavior10.1039/C9CP06196G ↗
44. Polyaniline crystalline nanostructures dependent negative permittivity metamaterials10.1016/j.polymer.2019.122129 ↗
45. Controllable organic magnetoresistance in polyaniline coated poly (p-phenylene-2, 6-benzobisoxazole) short fibers10.1039/C9CC04789A ↗
46. Three-dimensional core-shell Fe3O4/Polyaniline coaxial heterogeneous nanonets: preparation and high performance supercapacitor electrodes10.1016/j.electacta.2019.05.073 ↗
47. Improved environmental stability, electrical and EMI shielding properties of vapor-grown carbon fiber-filled polyaniline-based nanocomposite10.1002/pen.25045 ↗
48. Frequency independent AC electrical conductivity and dielectric properties of polyaniline-based conductive thermosetting composite10.1515/polyeng-2018-0031 ↗
49. Preparation and characterization of one-pot PANi/Fe/Fe3O4/Fe2O3 nanocomposite and investigation of its microwave, magnetic and optical performance10.1016/j.synthmet.2019.04.008 ↗
50. A novel approach to prepare one-pot Fe/PPy nanocomposite and evaluation of its microwave, magnetic, and optical performance10.1088/2053-1591/aaf709 ↗
51. Preparation of a superior intense, lightweight, affordable, broadband microwave-absorbing nanocomposite by PUF/PANi10.1088/2053-1591/ab2793 ↗
52. Synthesis and characterization of magnetic zeolite Y-palladium–nickel ferrite by ultrasonic irradiation and investigating its catalytic activity in Suzuki-Miyaura cross-coupling reactions10.1021/acsomega.9b00666 ↗
53. R. Peymanfar, M. Ahmadi, S. Javanshir, Tailoring GO/BaFe 12 O 19/La 0.5 Sr 0.5 MnO 3 ternary nanocomposite and investigation of its microwave characteristics, Mater. Res. Express (2019).
54. Preparation and investigation of structural, magnetic, and microwave absorption properties of aluminum-doped strontium ferrite/MWCNT/polyaniline nanocomposite at KU-band frequency10.1002/app.45135 ↗
55. Magnetic BiFeO 3 grafted with MWCNT hybrids as advanced photocatalysts for removing organic contamination with a high concentration10.1039/C6RA08316A ↗
56. La-substituted into the CuFe2O4 nanostructure: a study on its magnetic, crystal, morphological, optical, and microwave features10.1007/s10854-020-03501-9 ↗
57. Tailoring La0. 8Sr0. 2MnO3/La/Sr nanocomposite using a novel complementary method as well as dissecting its microwave, shielding, optical, and magnetic characteristics10.1016/j.ceramint.2020.05.139 ↗
58. K. Fitch, C. Kemker, Solar radiation and photosynethically active radiation, 2016.
59. The effect of graphite oxide on the thermoelectric properties of polyaniline10.1016/j.carbon.2012.03.001 ↗
60. Thermoelectric properties of conducting polyaniline/graphite composites10.1016/j.matlet.2011.01.014 ↗
61. Synthesis and thermoelectric properties of hydrochloric acid-doped polyaniline10.1016/j.synthmet.2010.03.001 ↗
62. Correlation between electrical conductivity, thermal conductivity, and ESR intensity of polyaniline10.1016/0379-6779(91)91162-4 ↗
63. Doping dependence of electrical and thermal conductivity of nanoscale polyaniline thin films10.1088/0022-3727/43/20/205302 ↗
64. Metamaterials with negative permeability and negative refractive index: experiments and simulations10.1088/1464-4258/9/9/S04 ↗
65. Permeability measurement of metamaterials with split-ring-resonators using free-space calibration-independent methods10.1007/s10762-011-9859-5 ↗
66. Three-dimension isotropic negative permeability material made of eight-split-ring resonator10.1063/1.4979585 ↗
67. Simulation of negative permittivity and negative permeability by means of evanescent waveguide modes-theory and experiment10.1109/TMTT.2005.845194 ↗
68. Composite medium with simultaneously negative permeability and permittivity10.1103/PhysRevLett.84.4184 ↗
69. Transform between the permeability and permittivity in the close-packed Ni nanoparticles10.1063/1.3464975 ↗
70. Waste cotton-derived magnetic porous carbon for high-efficiency microwave absorption10.1016/j.coco.2018.06.007 ↗
71. Architecting 2D (LaBa2Fe3O8. 55) 0.3333 nanosheets using the modified sol-gel method and evaluation of their microwave, magnetic, and optical performance10.1088/2053-1591/ab37d8 ↗
72. Tailoring GO/BaFe12O19/La0. 5Sr0. 5MnO3 ternary nanocomposite and investigation of its microwave characteristics10.1088/2053-1591/ab1fb3 ↗
73. Electrospun SnO2 submicron fibers for broadband microwave absorption10.1088/0022-3727/48/49/495303 ↗
74. Loss mechanism and microwave absorption properties of hierarchical NiCo2O4 nanomaterial10.1088/0022-3727/48/21/215305 ↗
75. Enhancement of electromagnetic shielding and piezoelectric properties of White Portland cement by hydration time10.1016/j.conbuildmat.2019.01.140 ↗
76. Microwave absorption by watermelon-like microspheres composed of γ-Fe 2 O 3, microporous silica and polypyrrole
77. Effect of annealing on electromagnetic performance and microwave absorption of spherical cobalt particles10.1088/0022-3727/48/40/405001 ↗