Effect of the combined use of carbon nanotubes (CNT) and metakaolin on the properties of cementitious matrices
Source abstract
Abstract
Abstract When incorporated into a cementitious matrix and properly dispersed, carbon nanotubes (CNTs) reduce shrinkage and increase the mechanical strength of the matrix; thus, they attract considerable research attention. However, research on the interaction between CNTs and supplementary cementitious materials (SCMs) is scarce, raising doubts regarding the impact of SCMs (such as metakaolin) on the dispersion of CNTs. The objective of the present study was to evaluate the effects of the combined use of CNTs and metakaolin on hydration (using isothermal calorimetry and X-ray diffraction), rheology (using rotational rheometry and a flow table), and physicomechanical properties of cementitious matrices. The addition of CNTs did not influence the hydration of the cement pastes, whereas the metakaolin accelerated the hydration, and the resumption of the reaction of the aluminates was anticipated. Additionally, the incorporation of CNTs and metakaolin increased the yield stress and plastic viscosity of the cement pastes and reduced the fluidity of the mortars. Finally, the addition of CNTs to mortars without metakaolin improved the physicomechanical properties, and the optimal content of CNTs was verified to be 0.075 wt%, yielding increases of 13.59% and 10.53% in the tensile strength (in flexion) and compressive strength, respectively, at 28 d. However, the addition of CNTs in pastes with metakaolin degraded the mechanical performance, indicating that the metakaolin made it difficult to disperse the CNTs and that the dispersion method used was not effective for these mixtures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. Supplementary cementitious materials10.1016/j.cemconres.2010.12.001 ↗
2. Recent advances in understanding the role of supplementary cementitious materials in concrete10.1016/j.cemconres.2015.03.018 ↗
3. The effect of supplementary cementitious materials on chloride binding in hardened cement paste10.1016/j.cemconres.2011.01.001 ↗
4. The effect of supplementary cementitious materials on the permeability of chloride in steam cured high-ferrite Portland cement concrete10.1016/j.conbuildmat.2018.11.107 ↗
5. Industrially interesting approaches to “low-CO2” cements10.1016/j.cemconres.2004.01.021 ↗
6. Characterization of supplementary cementitious materials by thermal analysis
7. Metakaolin and calcined clays as pozzolans for concrete: a review10.1016/S0958-9465(00)00092-5 ↗
8. Influence of metakaolin on the properties of mortar and concrete: a review10.1016/j.clay.2008.11.007 ↗
9. Durability performance of CNT and nanosilica admixed cement mortar10.1016/j.conbuildmat.2017.11.003 ↗
10. Shrinkage characteristics and strength recovery of nanomaterials-cement composites10.1016/j.compstruct.2018.03.003 ↗
11. Effects of pozzolanic and non-pozzolanic nanomaterials on cement-based materials10.1016/j.conbuildmat.2019.04.057 ↗
12. Effect of carbon nanotubes (CNT) on the properties of traditional cementitious materials10.1016/j.conbuildmat.2017.07.089 ↗
13. Modeling of van der Waals force for infinitesimal deformation of multi-walled carbon nanotubes treated as cylindrical shells10.1016/j.ijsolstr.2005.03.045 ↗
14. Influence of multiwall carbon nanotube functionality and loading on mechanical properties of PMMA/MWCNT bone cements
15. On the mechanical and shrinkage behaviour of cement mortars reinforced with carbon nanotubes10.1016/j.conbuildmat.2018.02.146 ↗
16. Highly dispersed carbon nanotube reinforced cement based materials10.1016/j.cemconres.2010.02.015 ↗
17. A review on the chemical, mechanical and microstructural characterization of carbon nanotubes-cement based composites10.1016/j.conbuildmat.2017.07.232 ↗
18. A review on nanomaterial dispersion, microstructure and mechanical properties of carbon nanotube and nanofiber reinforced cementitious composites
19. Influence of carbon nanotubes structure on the mechanical behavior of cement composites10.1016/j.compscitech.2009.05.002 ↗
20. Carbon nano-tube and nano-fiber in cement mortar: effect of dosage rate and water-cement ratio10.14355/ijmsci.2014.0402.01 ↗
21. Optimum carbon nanotubes’ content for improving flexural and compressive strength of cement paste10.1016/j.conbuildmat.2017.06.020 ↗
22. Durability of multi-walled carbon nanotube reinforced concrete10.1016/j.conbuildmat.2017.12.221 ↗
23. Chemical and mechanical characterization of ternary cement pastes containing metakaolin and nanosilica10.1016/j.conbuildmat.2017.10.123 ↗
24. Evaluating the effects of sugar cane bagasse ash (SCBA) and nanosilica on the mechanical and durability properties of mortar10.1016/j.conbuildmat.2017.07.041 ↗
25. Compressive strength and microstructure of carbon nanotubes-fly ash cement composites10.1016/j.msea.2009.09.039 ↗
26. Enhanced effect of carbon nanotube on mechanical and electrical properties of cement composites by incorporation of silica fume10.1016/j.compstruct.2013.07.042 ↗
27. Effect of multi-walled carbon nanotubes (MWCNTs) on the strength development of cementitious materials10.1016/j.jmrt.2018.09.006 ↗
28. Fire resistance and mechanical properties of carbon nanotubes – clay bricks wastes (Homra) composites cement10.1016/j.conbuildmat.2015.08.074 ↗
29. Ceramic waste as an efficient material for enhancing the fire resistance and mechanical properties of hardened Portland cement pastes10.1016/j.conbuildmat.2017.08.040 ↗
30. ASTM Standard C150/C150M-18. Standard specification for Portland cement. ASTM International, West Conshohocken, PA, 2018.
31. Associação Brasileira De Normas Técnicas (ABNT). NBR 13276 – Cimento Portland - Requisitos. Rio de Janeiro, 2018.
32. Associação Brasileira De Normas Técnicas (ABNT). NBR 12653 – Materiais pozolânicos - Requisitos. Rio de Janeiro, 2014.
33. Calorimetry
34. Fresh and hardened properties of self-compacting concrete containing metakaolin10.1016/j.conbuildmat.2012.04.109 ↗
35. Rheology and mechanical characteristics of self-compacting concrete mixtures containing metakaolin10.1016/j.conbuildmat.2014.04.048 ↗
36. Effect of SCM combinations on paste rheology and its relationship to particle characteristics of the mixture10.1016/j.conbuildmat.2016.07.094 ↗
37. Mechanical behavior and transport properties of cementitious composites reinforced with carbon nanotubes
38. Effect of superplasticizers on workability retention and initial setting time of cement pastes10.1016/j.conbuildmat.2010.02.021 ↗
39. Correlations of the dispersing capability of NSF and PCE types of superplasticizer and their impacts on cement hydration with the adsorption in fresh cement pastes10.1016/j.cemconres.2014.11.009 ↗
40. Effects of polycarboxylate superplasticizers with different molecular structure on the hydration behavior of cement paste10.1016/j.conbuildmat.2015.12.178 ↗
41. Evaluation of mechanical properties and carbonation of mortars produced with construction and demolition waste10.1016/j.conbuildmat.2017.11.089 ↗
42. The influences of admixtures on the dispersion, workability, and strength of carbon nanotube-OPC paste mixtures10.1016/j.cemconcomp.2011.09.013 ↗
43. Associação Brasileira De Normas Técnicas (ABNT). NBR 16541 - Argamassa para assentamento e revestimento de paredes e tetos – Preparo da mistura para a realização de ensaios. Rio de Janeiro, 2016.
44. Thermogravimetric analysis
45. Rheological behavior of cement pastes from MRI velocimetry10.1016/j.cemconres.2005.03.009 ↗
46. Reproducible mini-slump test procedure for measuring the yield stress of cementitious pastes10.1617/s11527-017-1103-x ↗
47. Rheological behaviour of Portland cement pastes and self-compacting concretes containing porcelain polishing residue10.1016/j.conbuildmat.2018.04.212 ↗
48. Associação Brasileira De Normas Técnicas (ABNT). NBR 13276 - Argamassa para assentamento e revestimento de paredes e tetos - Determinação do índice de consistência. Rio de Janeiro, 2016.
49. Associação Brasileira De Normas Técnicas (ABNT). NBR 9779 - Argamassa e concreto endurecidos — Determinação da absorção de água por capilaridade. Rio de Janeiro, 2012.
50. Associação Brasileira De Normas Técnicas (ABNT). NBR 13279 – Argamassa para assentamento e revestimento de paredes e tetos – Determinação da resistência à tração na flexão e à compressão. Rio de Janeiro, 2005.
51. Advances in understanding hydration of Portland cement10.1016/j.cemconres.2015.05.025 ↗
52. Cement substitution by a combination of metakaolin and limestone10.1016/j.cemconres.2012.09.006 ↗
53. The influence of the filler effect on the sulfate requirement of blended cements10.1016/j.cemconres.2019.105918 ↗
54. Growth of cement hydration products on single-walled carbon nanotubes
55. Development of carbon nanotube modified cement paste with microencapsulated phase-change material for structural-functional integrated application10.3390/ijms16048027 ↗
56. Dispersion of multi-walled carbon nanotubes and its effect on the properties of cement composites10.1016/j.cemconcomp.2016.09.007 ↗
57. The effect of multi-walled carbon nanotubes on the rheological properties and hydration process of cement pastes10.1016/j.conbuildmat.2018.09.082 ↗
58. The role of carbon nanotube on hydration kinetics and shrinkage of cement composite10.1016/j.compositesb.2019.04.004 ↗
59. Effect of the reagglomeration process of multi-walled carbon nanotubes dispersions on the early activity of nanosilica in cement composites10.1016/j.conbuildmat.2013.12.084 ↗
60. X-ray powder diffraction applied to cement
61. Rheological properties and hydration behavior of Portland cement mortars containing calcined red mud10.1139/cjce-2012-0230 ↗
62. Effect of raw clay type, fineness, water-to-cement ratio and fly ash addition on workability and strength performance of calcined clay – Limestone Portland cements10.1016/j.cemconres.2017.08.003 ↗
63. Dilatant behavior of superplasticized cement pastes containing metakaolin10.1016/S0008-8846(98)00046-5 ↗
64. Study of the shear thickening effect of superplasticizers on the rheological behaviour of cement pastes containing or not mineral additives10.1016/S0008-8846(00)00330-6 ↗
65. I.R. Oliveira, A.R. Studart, R.G. Pileggi, V.C. Pandolfelli, Dispersão e empacotamento de partículas – princípios e aplicações em processamento cerâmico. Fazendo Arte Editorial, 195p, 2000.
66. Effect of solid concentration and shear rate on shear-thickening response of high-performance cement suspensions10.1016/j.conbuildmat.2013.10.078 ↗
67. Cement particle flocculation and breakage monitoring under Couette flow10.1016/j.cemconres.2013.05.018 ↗
68. Influence of MWCNT/surfactant dispersion on the rheology of Portland cement pastes10.1016/j.cemconres.2018.02.020 ↗
69. Effect of temperature on porosity and on chloride diffusion in cement pastes10.1016/j.conbuildmat.2007.03.018 ↗
70. On the aspect ratio effect of multi-walled carbon nanotube reinforcements on the mechanical properties of cementitious nanocomposites10.1016/j.conbuildmat.2012.04.086 ↗