Evaluation of post-fire pull-out behavior of steel rebars in high-strength concrete containing waste PET and steel fibers: Experimental and theoretical study
Source abstract
Abstract
Abstract The present research addressed the post-fire bond performance between high-strength concrete incorporating waste polyethylene terephthalate (WPET) and steel reinforcement; a subject that had not been previously addressed. Further, the impact of incorporating steel fiber, as a commonly used material, into the mixture on the bond improvement was assessed. To this end, the content of WPET substituting for the fine aggregate by volume (0, 5, and 10%), volume fraction of steel fibers (0, 0.5, and 1%), applied temperature (25, 200, 400, and 600 °C) were considered as variables in a total of 108 samples that were produced. Afterward, the samples were subjected to the pullout test to examine different parameters. These parameters included the bond behavior, failure mode, bond stress-slip response, and bond strength-compressive strength behavior. Based on the results, with the incorporation of 5 and 10% volume content of WPET replacing fine particles, the bond strength declined by 4 and 26%, respectively, and as the temperature was raised, this reducing effect increased. Furthermore, the presence of steel fiber had a positive impact in the samples with the splitting failure mode, while it had a negligible or sometimes even negative impact in the samples with the pull-out failing mode. Lastly, multivariate prediction models were proposed for the bond behavior and bond-slip response as a function of the concrete compressive strength, WPET content, content of steel fiber, and the target temperature. Afterward, a comparison was made between the empirical results and the predictions of models developed by other researchers and the fib Model Code 2010 and ACI 408-12 codes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Fire effects on concrete materials · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Effects of waste PET bottles aggregate on the properties of concrete10.1016/j.cemconres.2004.05.014 ↗
2. An investigation on the use of shredded waste PET bottles as aggregate in lightweight concrete10.1016/j.wasman.2009.09.033 ↗
3. Thermal conductivity, compressive strength and ultrasonic wave velocity of cementitious composite containing waste PET lightweight aggregate (WPLA)10.1016/j.compositesb.2012.09.012 ↗
4. Recycling of PET bottles as fine aggregate in concrete10.1016/j.wasman.2010.01.030 ↗
5. Tensile and compressive behavior of self-compacting concrete incorporating PET as fine aggregate substitution after thermal exposure: Experiments and modeling10.1016/j.conbuildmat.2021.123067 ↗
6. The Development of a Concrete Block containing PET Plastic Bottle Flakes10.5539/jsd.v10n6p186 ↗
7. The Korea Institute of Resources Recycling, The Korean Institute of Resources Recycling, Recycling Handbook, The Korea Institute of Resources Recycling, Seoul, Korea, 1999.
8. Post-heating flexural behavior and durability of hybrid PET–Rubber aggregate concrete10.1016/j.conbuildmat.2020.120359 ↗
9. P. Gandjar, H. Bimasena, P.A. Yuta, P. Heru, Bond-slip behavior of steel bar embedded in lightweight concrete using sand coated polypropylene coarse aggregate, materials science forum, Trans. Tech. Publ. 2018 103-108.10.4028/www.scientific.net/MSF.929.103 ↗
10. Employment the plastic waste to produce the light weight concrete10.1016/j.egypro.2018.11.160 ↗
11. Thermal insulation enhancement in concretes by adding waste PET and rubber pieces10.1016/j.conbuildmat.2008.09.014 ↗
12. Behavior of high strength concrete–filled hybrid large–small rupture strains FRP tubes10.1016/j.engstruct.2020.110264 ↗
13. Time-temperature properties of polymer concrete using recycled PET10.1016/0958-9465(94)00004-I ↗
14. Residual compressive stress–strain relationship for hybrid recycled PET–crumb rubber aggregate concrete after exposure to elevated temperatures10.1061/(ASCE)MT.1943-5533.0002749 ↗
15. Predicting post-fire behavior of crumb rubber aggregate concrete10.1016/j.conbuildmat.2019.116834 ↗
16. Post-fire compressive strength of recycled PET aggregate concrete reinforced with steel fibers: optimization and prediction via RSM and GEP10.1016/j.conbuildmat.2020.119057 ↗
17. Axial compressive performance of steel tube columns filled with steel fiber-reinforced high strength concrete containing tire aggregate after exposure to high temperatures10.1016/j.engstruct.2020.110608 ↗
18. Compressive performance of steel fiber-reinforced rubberized concrete core detached from heated CFST10.1016/j.conbuildmat.2019.117832 ↗
19. Post-fire behavior of unconfined and steel tube confined rubberized concrete under axial compression
20. Innovative models for predicting post-fire bond behavior of steel rebar embedded in steel fiber reinforced rubberized concrete using soft computing methods10.1016/j.istruc.2021.02.015 ↗
21. ACI 408R-12, Bond and Development of Straight Reinforcing Bars in Tension, in: ACI Committee 408 (Ed.) American Concrete Institute, Farmington Hills, Michigan, USA, 2012, p. 38.
22. Three-dimensional analytical model for the pull-out response of anchor-mortar-concrete anchorage system based on interfacial bond failure10.1016/j.engstruct.2018.11.024 ↗
23. Probabilistic prediction model for RC bond failure mode10.1016/j.engstruct.2021.111944 ↗
24. Bond behavior of reinforcement in conventional and self-compacting concrete10.1260/1369-4332.15.12.2033 ↗
25. Confinement effect on the bond behaviour of beams under static and repeated loading10.1016/j.conbuildmat.2012.09.081 ↗
26. Experimental study on the interfacial bond strength and energy dissipation capacity of steel and steel fibre reinforced concrete (SSFRC) structures10.1016/j.engstruct.2021.112094 ↗
27. A new post-peak behavior assessment approach for effect of steel fibers on bond stress-slip relationship of concrete and steel bar after exposure to high temperatures10.1016/j.conbuildmat.2021.122340 ↗
28. Influence of waste rubber utilization on the fracture and steel–concrete bond strength properties of concrete10.1016/j.conbuildmat.2015.10.030 ↗
29. Use of different forms of waste plastic in concrete–a review10.1016/j.jclepro.2015.08.042 ↗
30. Short-term mechanical properties of concrete containing recycled polypropylene coarse aggregates under ambient and elevated temperature10.1061/(ASCE)MT.1943-5533.0002046 ↗
31. The combined effects of waste Polyethylene Terephthalate (PET) particles and pozzolanic materials on the properties of self-compacting concrete10.1016/j.jclepro.2015.09.107 ↗
32. Use of plastic waste as aggregate in cement mortar and concrete preparation: A review10.1016/j.conbuildmat.2012.02.066 ↗
33. Mechanical properties and abrasion behaviour of concrete containing shredded PET bottle waste as a partial substitution of natural aggregate10.1016/j.conbuildmat.2013.11.049 ↗
34. Influence of content and particle size of waste pet bottles on concrete behavior at different w/c ratios10.1016/j.wasman.2009.05.007 ↗
35. Response and modeling of axially-loaded concrete-filled steel columns with recycled coarse and fine aggregate10.1016/j.engstruct.2020.111733 ↗
36. Bond of confined steel fiber reinforced concrete to deformed bars
37. Bond behavior of normal and high-strength fiber reinforced concrete
38. Local bond stress-slip behavior of reinforcing bars embedded in plain and fiber concrete
39. Bond of reinforcing bars to steel fiber reinforced concrete10.1016/j.conbuildmat.2015.12.044 ↗
40. RILEM TC, RC 6 Bond test for reinforcement steel. 2. Pull-out test, 1983, RILEM recommendations for the testing and use of constructions materials (1994) 218-220.
41. Effectiveness of fibers and binders in high-strength concrete under chemical corrosion
42. Evaluation of post-heating flexural behavior of steel fiber-reinforced high-strength concrete beams reinforced with FRP bars: experimental and analytical results10.1016/j.engstruct.2020.111292 ↗
43. Eccentric compressive behavior of steel fiber-reinforced RC columns strengthened with CFRP wraps: experimental investigation and analytical modeling10.1016/j.engstruct.2020.111389 ↗
44. Bond-slip behavior between pre-corroded rebar and steel fiber reinforced concrete10.1016/j.conbuildmat.2018.06.116 ↗
45. A new cracking model for concrete ties reinforced with bars having different diameters and bond laws10.1016/j.engstruct.2021.112026 ↗
46. Non-linear multivariable model for predicting the steel to concrete bond after high temperature exposure10.1016/j.conbuildmat.2020.118713 ↗
47. H.H. Dinh, Shear Behavior of Steel Fiber Reinforced Concrete Beams without Stirrup Reinforcement, 2009.
48. Bond after fire10.1016/j.conbuildmat.2016.11.131 ↗
49. Post-fire mechanical performance of concrete made with selected plastic waste aggregates10.1016/j.cemconcomp.2014.07.004 ↗
50. Combustion and pyrolysis of poly (ethylene terephthalate). I. The role of flame retardants on products of pyrolysis10.1002/app.1981.070260126 ↗
51. Kinetic model for the pyrolysis and combustion of poly-(ethylene terephthalate)(PET)10.1016/S0165-2370(00)00141-8 ↗
52. Feasibility of concrete mixtures containing cross-linked polyethylene waste materials10.1016/j.conbuildmat.2019.07.285 ↗
53. Effect of temperature induced bond degradation on fire response of reinforced concrete beams10.1016/j.engstruct.2017.03.022 ↗
54. ASTM, ASTM C150/C150M-20: Standard Specification for Portland Cement, ASTM International, West Conshohocken, PA, 2020.
55. Mechanical properties of GGBFS-based geopolymer concrete incorporating natural zeolite and silica fume with an optimum design using response surface method
56. ASTM, ASTM A370-19e1: Standard Test Methods and Definitions for Mechanical Testing of Steel Products, ASTM International, West Conshohocken, PA, 2019.
57. ASTM, ASTM C234-91a: Standard Test Method for Comparing Concretes on the Basis of the Bond Developed with Reinforcing Steel (Withdrawn 2000), ASTM International, West Conshohocken, PA, 1991.
58. Bonding behavior of deformed steel rebars in sustainable concrete containing both fine and coarse recycled aggregates10.3390/ma10091082 ↗
59. Steel–concrete bond in lightweight fiber reinforced concrete under monotonic and cyclic actions10.1016/j.engstruct.2005.01.010 ↗
60. Statistical approach to effect of factors involved in bond performance of steel fiber-reinforced concrete
61. The effect of steel fiber on the bond between concrete and deformed steel bar in SFRCs10.1016/j.conbuildmat.2012.09.098 ↗
62. Bond stress slip response of bars embedded in hybrid fibre reinforced high performance concrete10.1016/j.conbuildmat.2013.09.032 ↗
63. ASTM, ASTM C143/C143M-15a: Standard Test Method for Slump of Hydraulic-Cement Concrete, ASTM International, West Conshohocken, PA, 2015.
64. ASTM, ASTM C39/C39M-20: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken, PA, 2020.
65. ISO · 2019
66. Post-fire flexural behavior of functionally graded fiber-reinforced concrete containing rubber
67. M. Nematzadeh, F. Hasan-Nattaj, A. Gholampour, H. Sabetifar, T.D. Ngo, Strengthening of heat-damaged steel fiber-reinforced concrete using CFRP composites: experimental study and analytical modeling, Structures, Elsevier, 2021 1856-1870.10.1016/j.istruc.2021.03.084 ↗
68. Effect of Hot-Compacted waste nylon fine aggregate on compressive Stress-Strain behavior of steel Fiber-Reinforced concrete after exposure to fire: Experiments and optimization10.1016/j.conbuildmat.2021.122742 ↗
69. Effect of rock wool waste on compressive behavior of pumice lightweight aggregate concrete after elevated temperature exposure10.1007/s10694-020-01070-1 ↗
70. Solid products from thermal decomposition of polyethylene terephthalate: investigation by CP/MAS 13C-NMR and fourier transform-IR spectroscopy10.1002/pol.1984.170220405 ↗
71. Effect of high temperatures on high performance steel fibre reinforced concrete10.1016/j.cemconres.2006.03.024 ↗
72. Experimental research on the compressive strength of steel fiber recycled concrete
73. Compressive behavior of steel fiber reinforced recycled aggregate concrete after exposure to elevated temperatures10.1016/j.conbuildmat.2014.08.012 ↗
74. I.F.f.S. Concrete, Bond of reinforcement in concrete, FIB Bulletin No. 10 (2000).
75. Tension development length of reinforcing bars embedded in high-strength concrete10.1016/0141-0296(95)00096-P ↗
76. Zuo · 1998
77. Splice strength of conventional and high relative rib area bars in normal and high-strength concrete
78. A detailed view on the rebar–to–concrete interaction based on refined measurement techniques10.1016/j.engstruct.2020.111332 ↗
79. Stochastic assessment of bond-slip behavior of plain round bars in low strength concrete10.1016/j.engstruct.2020.111658 ↗
80. Z.P. Bažant, M.F. Kaplan, Z.P. Bazant, Concrete at high temperatures: material properties and mathematical models, (1996).
81. An experimental investigation of bond and compressive strength of concrete with mineral admixtures at high temperatures
82. Bond behavior of reinforcing steel bar and geopolymer concrete10.1061/(ASCE)MT.1943-5533.0003237 ↗
83. Bond characteristics between high-strength bars and ultrahigh-performance concrete10.1061/(ASCE)MT.1943-5533.0002919 ↗
84. Bond behavior between basalt fibres reinforced polymer sheets and steel fibres reinforced concrete10.1016/j.engstruct.2018.09.052 ↗
85. Energy dissipation and debonding mechanism of steel and steel fibre reinforced concrete composite beams10.1016/j.engstruct.2020.111353 ↗
86. A. Zekany, S. Neumann, J.O. Jirsa, J. Breen, The Influence of Shear on Lapped Splices in Reinforced Concrete, 1981.
87. F.M. Code, Model Code 2010, Federation Internationale du Beton (fib) 391 (2010).
88. Z. Huang, B. Engström, J. Magnusson, Experimental investigation of the bond and anchorage behaviour of deformed bars in high strength concrete, 4° International Symposium on Utilization of High-Strength/High Performance Concrete. Proceedings, 1996, pp. 29-31.
89. Bond-slip response of reinforcing bars embedded in plain and fiber concrete10.1061/(ASCE)0899-1561(2002)14:6(503) ↗
90. Bond-slip behavior of self-compacting concrete and vibrated concrete using pull-out and beam tests10.1617/s11527-007-9307-0 ↗
91. Bond strength of steel bars embedded in high-performance fiber-reinforced cementitious composite before and after exposure to elevated temperatures10.1016/j.firesaf.2017.06.006 ↗
92. Post-fire behavior of bond between high strength pozzolanic concrete and reinforcing steel10.1016/j.conbuildmat.2004.03.006 ↗
93. Bond between deformed reinforcement and normal and high-strength concrete with and without fibers10.1617/s11527-009-9551-6 ↗
94. F. Faleschini, A. Santamaria, M.A. Zanini, C. Pellegrino, Experimental Assessment of Bond Characteristics in Reinforced Concrete with Electric Arc Furnace Slag, Conference on Italian Concrete Days, Springer, 2018, pp. 262-272.10.1007/978-3-030-23748-6_20 ↗
95. Beam test on bond behavior between high-grade rebar and high-strength concrete after elevated temperatures10.1016/j.firesaf.2014.07.001 ↗
96. Effect of elevated temperature on bond between steel reinforcement and fiber reinforced concrete10.1016/j.firesaf.2007.11.002 ↗
97. Local bond strength of reinforcing bars in normal strength and high-strength concrete (HSC)
98. A reevaulation of test data on development length and splices
99. Early-age bond strength in reinforced concrete
100. Interfacial bond strength of glass fiber reinforced polymer bars in high-strength concrete10.1016/j.compositesb.2007.03.008 ↗