Mesoscopic numerical simulation of effective thermal conductivity of tensile cracked concrete
Source abstract
Abstract
Abstract The pronounced decrease of effective thermal conductivity (ETC) due to cracking behavior of concrete will change the temperature profile in concrete structures, indirectly inducing the redistribution of thermal stresses. To evaluate this phenomenon, this paper presents a mesoscopic numerical method that is capable of quantitatively evaluating the effect of cracking behavior on concrete ETC. With this method, the development of ETC during uniaxial tension test of concrete is investigated and main conclusions are drawn as follows: (a) the ETC decreases greatly when micro-cracks initiate, and then becomes anisotropic when micro-cracks further propagate; (b) the cracked concrete ETC and its decrease rate nonlinearly increase with aggregate volume fraction (AVF); (c) the drop of ETC in specimens made by circle aggregates is greater than that in specimens made by arbitrary polygon aggregates, and their difference becomes more pronounced with the increase of AVF; (d) these numerical results can be utilized to determine uncertain parameters when estimating cracked concrete ETC using a recommended semi-theoretical model.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Rock Mechanics and Modeling
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Estimation of poromechanical and thermal conductivity properties of unsaturated isotropically microcracked cement pastes10.1002/nag.969 ↗
2. Change of thermal conductivity of concrete caused by brittle damage evolution10.1002/bapi.200810057 ↗
3. Effect of cracks on hygric and thermal characteristics of concrete10.1002/bapi.200810058 ↗
4. Effects of debonding on thermal conduction and humidity diffusion at mesoscale of concrete10.1002/pamm.201410232 ↗
5. Numerical study of the influence of material structure on effective thermal conductivity of concrete10.1080/01457632.2011.635988 ↗
6. Numerical simulation of aggregate shapes of two-dimensional concrete and its application10.1061/(ASCE)0893-1321(2007)20:3(172) ↗
7. Numerical simulation of dynamic tensile-failure of concrete at meso-scale10.1016/j.ijimpeng.2013.12.005 ↗
8. Meso-scale computational modeling of the plastic-damage response of cementitious composites10.1016/j.cemconres.2010.12.002 ↗
9. Effects of interfacial transition zones on the stress–strain behavior of modeled recycled aggregate concrete10.1016/j.cemconres.2013.05.004 ↗
10. An analysis of the influence of material structure on the effective thermal conductivity of theoretical porous materials using finite element simulations10.1016/S0140-7007(03)00094-X ↗
11. Characterization and simulation of microstructure and thermal properties of foamed concrete10.1016/j.conbuildmat.2013.06.027 ↗
12. Maxwell · 1881
13. Methods for predicting the thermal conductivity of composite systems: a review10.1002/pen.760160905 ↗
14. Calculation of various physics constants in heterogenous substances. I. Dielectricity constants and conductivity of mixed bodies from isotropic substances10.1002/andp.19354160705 ↗
15. thermal conductivity of heterogeneous two-component systems10.1021/i160003a005 ↗
16. Effective thermal conductivity of composites with interfacial thermal barrier resistance10.1177/002199838702100602 ↗
17. J.J. Wang, Preparation and investigation on the polyimide/AIN composite materials (Ph.D.), Zhejiang University, 2001.
18. Theoretical models of effective thermal conductivity of concrete based on composite materials in mesoscale
19. A plastic-damage model for concrete10.1016/0020-7683(89)90050-4 ↗
20. Plastic-damage model for cyclic loading of concrete structures10.1061/(ASCE)0733-9399(1998)124:8(892) ↗
21. Computational thermal homogenization of concrete10.1016/j.cemconcomp.2012.08.026 ↗
22. Hibbitt · 2012
23. Skrzypek · 1999
24. Mesomechanical characterization of porosity in cementitious composites by means of a voxel-based finite element model10.1016/j.commatsci.2014.03.066 ↗
25. The interfacial transition zone (ITZ) between cement paste and aggregate in concrete10.1023/B:INTS.0000042339.92990.4c ↗
26. Multiscale modeling of concrete10.1007/s11831-011-9063-8 ↗
27. Nanomechanical properties of interfacial transition zone in concrete
28. Factors affecting the thermal properties of concrete and applicability of its prediction models10.1016/S0360-1323(01)00061-0 ↗
29. Numerical homogenization of hardened cement paste10.1007/s00466-007-0211-9 ↗
30. An experimental study on thermal conductivity of concrete10.1016/S0008-8846(02)00965-1 ↗
31. Evaluation of thermal conductivity in air permeable concrete for dynamic breathing wall construction10.1016/j.cemconcomp.2007.04.008 ↗