journal article·2016-01

Modified foundation modelling of dowel embedment in glulam connections

V. Karagiannis, C. Málaga-Chuquitaype, A.Y. Elghazouli

Publisher page

Abstract

Abstract This paper examines the embedment behaviour of single-dowel connections in Scandinavian Spruce Glulam by means of experimental and numerical investigations. First, the experimental results of a series of single-dowel tests on samples of different geometry and grain directions are presented. The evolution of local strain concentrations around the fastener at increasing levels of bearing deformation, is reported in detail by means of non-contact field strain measurements and its implications are discussed. Detailed Finite Element simulations are also carried out and subsequently employed to highlight the main features of the response of doweled connections in glulam. A foundation model, initially developed for Douglas-fir ( Pseudotsuga menziesii ) timber, is upgraded and adapted for Scandinavian Spruce Glulam ( Picea abies ) elements subjected to loads acting perpendicular and parallel to the grain direction. The proposed model is based on the definition of equivalent material parameters for the crushing region around the dowel hole. To this end, relationships for the estimation of material characteristics as a function of the crushing volume are suggested. The validity and accuracy of the proposed modified foundation models are examined against the experimental results. It is shown the improved foundation model is able to simulate the embedment stiffness, capacity and inelastic behaviour of single-dowel connections on glulam with reasonable accuracy for strains of up to 8%, and can therefore be used for design and assessment purposes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Wood Treatment and Properties · Mechanical Behavior of Composites · Tree Root and Stability Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Nonlinear material models for analysis of bolted wood connections10.1061/(ASCE)0733-9445(1997)123:8(1063) ↗
2. Qualitative assessment of failure in bolted connections: maximum stress criterion10.1520/JTE12693J ↗
3. ABAQUS · 1994
4. Stress and failure analysis of wood composites: a new model10.1016/j.compositesb.2003.10.002 ↗
5. Elasto-plastic modelling of wood bolted connections10.1016/S0045-7949(02)00482-0 ↗
6. Load–slip characteristics of nails
7. Hong · 2007
8. European Standard CEN EN 408:2010+A1, Timber Structures – Structural Timber and Glued Laminated Timber – Determination of Some Physical and Mechanical Properties, July 2012.
9. European Standard CEN EN 383:2007, Timber Structures – Test Methods – Determination of Embedment Strength and Foundation Values for Dowel Type Fasteners, January 2007.
10. EN 1995-1-1:2004+A2:2014 · 2014
11. LaVision UK Ltd., (last accessed 15.05.15).
12. Full-field 3D measurement using multi-camera digital image correlation system10.1016/j.optlaseng.2013.03.001 ↗
13. Davis · 2014
14. Coefficient of friction values applicable to contact surfaces between mild steel connectors such as bolts and dry European white wood
15. ABAQUS · 2014
16. European Standard CEN EN 338:2009, Structural Structures – Strength Classes, October 2009.