journal article·2009-01

Quasi-static mechanical behaviour of a double-shear single dowel wood connection

Cristóvão L. Santos, Abílio M.P. De Jesus, José J.L. Morais, José L.P.C. Lousada

Publisher page

Abstract

Abstract Results of a double-shear single dowel wood connection tested under monotonic quasi-static loading, according to the EN26891 standard, are discussed in this paper. The Pinus pinaster species, which is one of the most important Portuguese woods, was used in this study. The initial joint slip modulus, the ultimate strength and the ductility are evaluated and compared with values given by the Eurocode 5. Embedding tests are also carried out according to the EN383 standard. The resulting data is used to predict the joint slip modulus, through a proposed analytical model supported by statistical regression analysis data. Finally, a three dimensional finite element model of the wood connection was built and calibrated using available experimental data. This model can be applied to evaluate accurate values for the joint initial slip modulus.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Wood Treatment and Properties · Mechanical Behavior of Composites · Structural Load-Bearing Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Itany · 1984
2. Soltis LA, Wilkinson TL. Bolted-connection design. General technical report FPL-GTR-54. Forest Products Laboratory – USDA. Madison, WI, 1987.10.2737/FPL-GTR-54 ↗
3. European Committee for Standardization. EN 1995-1-1 Design of timber structures. Part 1-1: General rules and rules for buildings. Brussels, 2004.
4. Johansen KW. Theory of timber connections. Int Assn Bridge Struct Eng Pub. 9. Bern, Iasbe, Zurich, Switzerland, 1949. p. 249–62.
5. European Committee for Standardization. EN383: Timber structures. Test methods. Determination of embedding strength and foundation values for dowel-type fasteners. European Standard, 1993.
6. Modelling bolted connections in wood: review10.1061/(ASCE)0733-9445(1997)123:8(1054) ↗
7. Estimation of yield and ultimate strengths of bolted timber joints by nonlinear analysis and yield theory10.1007/s10086-002-0497-3 ↗
8. Finite element modelling for the mechanical behaviour of dowel-type timber joints10.1016/S0045-7949(03)00338-9 ↗
9. Non-linear analysis of dowelled timber connections: a new approach for embedding modelling10.56748/ejse.546 ↗
10. Elasto-plastic modelling of wood bolted connections10.1016/S0045-7949(02)00482-0 ↗
11. Nonlinear material models for analysis of bolted wood connections10.1061/(ASCE)0733-9445(1997)123:8(1063) ↗
12. A three-dimensional model for bolted connections in wood10.1139/l03-009 ↗
13. European Committee for Standardization. EN26891: Timber structures. Test methods. Determination of embedding strength and foundation values for dowel type fasteners. European Standard, 1993.
14. Swanson Analysis Systems Inc. ANSYS. Version 10.0. Houston, 2005.
15. Xavier JC. Caracterização do comportamento ao corte da madeira usando o ensaio de Iosipescu. MSc Thesis, University of Trás-os-Montes and Alto Douro, Vila Real, Portugal, 2003.
16. Pereira J. Comportamento mecânico da madeira em tracção nas direcções de simetria material. MSc Thesis, University of Trás-os-Montes and Alto Douro, Vila Real, Portugal, 2003.
17. Oliveira M. Caracterização do comportamento ao corte da madeira usando o ensaio de Arcan. MSc Thesis, Universidade of Trás-os-Montes and Alto Douro, Vila Real, Portugal, 2003.
18. Garrido N, Identificação do comportamento ao corte da madeira, através do ensaio de tracção fora dos eixos de simetria material. MSc Thesis, Universidade of Trás-os-Montes and Alto Douro, Vila Real, Portugal, 2004.