journal article·2013-10

The performance of high-strength flowable concrete made with binary, ternary, or quaternary binder in hot climate

Hassan EL-Chabib, Ahmed Ibrahim

Publisher page

Abstract

Abstract This paper investigates the performance of high-strength flowable concrete (HSFC) made with binary, ternary, or quaternary binder and with up to 70% of Portland cement replaced by supplementary cementitious materials (SCMs). Materials used as partial replacement of cement include class C and class F fly-ash, ground granulated blast furnace slag, and silica fume. A total of 16 concrete mixtures were prepared and tested. Two sets of concrete samples were prepared from each mixture. One set was cured under normal curing conditions (i.e. in a conventional curing room until the day of testing or in the curing room for the first 7 days and air cured for the remaining of the study) and the second set was cured in the curing room for the first 7 days and then exposed to a temperature of 46 °C (115 °F) in the oven on a 12-h based cycles until testing. Results showed that HSFC made with high volume of SCMs and exposed to hot climate condition performs similar, in some cases superior, to that of a similar concrete cured under normal condition.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Fire effects on concrete materials · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Kumar Mehta P. High-performance, high-volume fly ash concrete for sustainable development. In: Proceedings of the international workshop on sustainable development and concrete, technology; 2004.
2. The behavior of concrete in hot climate10.1007/BF02472429 ↗
3. Mechanical properties of hardened concrete in hot-humid climate10.1016/0008-8846(91)90111-T ↗
4. Self-consolidating concrete subjected to high temperature: mechanical and physicochemical properties10.1016/j.cemconres.2009.08.001 ↗
5. Compressive strength of self-compacting concrete during high-temperature exposure10.1061/(ASCE)MT.1943-5533.0000102 ↗
6. High temperature performance of self-compacting high-volume fly ash concrete mixes10.1260/2040-2317.2.2.81 ↗
7. Saeed A, Nazir A. Investigation of extreme weather conditioning. In: 29th Conference on our world in concrete & structures. Singapore; 2004.
8. Naus DJ. The effect of elevated temperature on concrete materials and structures-a literature review. US Nuclear Regulatory Commission, Office of Nuclear Regulatory Research, NRC FIN No. Y6741; 2005.
9. Effect of elevated fire temperature and cooling regime on the fire resistance of normal and self-consolidating concrete
10. Effect of elevated temperature on mechanical properties of high strength self compacting concrete
11. Thermal and mechanical properties of fiber reinforced high performance self-consolidating concrete at elevated temperatures10.1016/j.cemconres.2011.06.012 ↗
12. Mechanical characteristics of self-consolidating concretes exposed to elevated temperatures10.1061/(ASCE)0899-1561(2007)19:8(648) ↗
13. ASTM C192-07 · 2007
14. ASTM C150/C150M · 2012
15. ASTM C1611/C1611M-09b · 2009
16. ASTM C231/C231M-09 · 2009
17. ASTM C39/C39M-10 · 2010
18. ASTM C490/C490M-09 · 2009
19. ASTM C1202-10 · 2010