Damage investigation of single-edge notched beam tests with normal strength concrete and ultra high performance concrete specimens using acoustic emission techniques
Source abstract
Abstract
Abstract The non-intrusive and non-destructive Acoustic Emission (AE) techniques acquire and analyze the signals emitted from the deformation or fracture of materials under external loading. In this study, the AE techniques with statistical analysis were used to study the damage process of single-edge notched beam (SEB) tests with normal strength concrete (NSC) and ultra high performance concrete (UHPC) specimens. The SEB tests with the lab-prepared NSC and UHPC specimens were conducted by employing a clip-gauge controlled servo-hydraulic testing system and an AE damage detection system. It was found that the cumulative AE events with respect to the crack mouth opening displacement (CMOD) or the crack tip opening displacement (CTOD) correlate to the mechanical loading of the specimens. A Weibull rupture probability distribution was proposed to quantitatively describe the mechanical damage behavior under the SEB test. A bi-logarithmic regression analysis was conducted to calibrate the Weibull damage distribution with detected AE signals and to predict the damage process as a function of the crack opening displacements. The calibrated Weibull damage functions were compared among NSC and UHPC specimens with different notch depths and locations. More AE damage events were detected for the specimen with larger notch-depth at the beginning of the damage process due to a higher initial stress concentration factor K I . The offset-notched specimen also produced more AE damage events due to shear damage effects. The results indicate that the calibrated Weibull rupture probability functions with AE event data can be applied to study damage processes under mechanical loading for brittle materials such as concrete.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Rock Mechanics and Modeling · Geophysical Methods and Applications · Ultrasonics and Acoustic Wave Propagation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Use of acoustic emission to identify damage modes in glass fibre reinforced polyester10.1016/S0266-3538(02)00087-8 ↗
2. Acoustic emission inspection
3. Acoustic emission at failure in quasi-brittle materials10.1016/S0950-0618(00)00072-6 ↗
4. Acoustic emissions of fatigue crack growth10.1016/0013-7944(73)90047-7 ↗
5. Study of fatigue crack characteristics by acoustic emission10.1016/0013-7944(94)00274-L ↗
6. Crack classification in concrete based on acoustic emission10.1016/j.conbuildmat.2010.05.004 ↗
7. Mechanisms of crack propagation due to corrosion of reinforcement in concrete by AE-SiGMA and BEM10.1016/j.conbuildmat.2003.10.007 ↗
8. Quantitative evaluation of fracture processes in concrete using signal-based acoustic emission techniques10.1016/j.cemconcomp.2006.02.006 ↗
9. Use of acoustic emission and X-ray computed tomography for damage evaluation of freeze-thawed concrete10.1016/j.conbuildmat.2010.05.005 ↗
10. Fracture process zone in concrete tension specimen10.1016/S0013-7944(99)00111-3 ↗
11. Acoustic emission behavior of steel fibre reinforced concrete under bending10.1016/j.conbuildmat.2009.06.042 ↗
12. Experimental study on AE characteristics of three-point-bending concrete beams10.1016/j.cemconres.2003.08.021 ↗
13. Advanced AE technique in composite materials research
14. Wei Zhang CX, Fanjin Kong. Application of wide band AE sensor in model test of reinforced concrete. In: 17th world conference on nondestructive testing. Shanghai; 2008.
15. Acoustic emission analysis applied to concrete under different loading conditions
16. Comparison of acoustic emission activity in reinforced and prestressed concrete beams under bending10.1016/S0950-0618(97)00036-6 ↗
17. Diagnostics of reinforced concrete bridges by acoustic emission
18. Quantitative damage estimation of concrete by acoustic emission10.1016/S0950-0618(00)00071-4 ↗
19. Quantitative damage evaluation of structural concrete by a compression test based on AE rate process analysis10.1016/j.conbuildmat.2003.10.009 ↗
20. A study of the effect of displacement rate and moisture content on the mechanical properties of concrete: use of acoustic emission10.1016/j.mechmat.2007.11.002 ↗
21. Kollmorgen · 2004
22. Mistras Group Inc. – Physical Acoustics Corporation; 2010.
23. ASTM. Annual book of ASTM standards: concrete and aggregates. Section four: construction; ed 2009.
24. RILEM TC162-TDF: test and design methods for steel fibre reinforced concrete: bending test
25. AFGC. Ultra high performance fibre-reinforced concretes – interim recommendations; 2002.
26. The history and development of acoustic emission in concrete engineering10.1680/macr.1996.48.177.321 ↗
27. Acoustic emission characteristics in concrete and diagnostic applications
28. A statistical distribution function of wide applicability10.1115/1.4010337 ↗
29. Fracture of model concrete: 2. Fracture energy and characteristic length10.1016/j.cemconres.2005.04.016 ↗
30. On the measurement of concrete fracture energy using three-point bend tests10.1007/BF02480689 ↗
31. Measurement of the fracture energy using three-point bend tests: Part 3—influence of cutting the P–δ tail10.1007/BF02472591 ↗
32. Anderson · 1995
33. Grosse · Acoust Emission Test · 200810.1007/978-3-540-69972-9 ↗