journal article·2013-11

Tests investigating the punching shear of a column-slab connection strengthened with non-prestressed or prestressed FRP plates

A. Abdullah, C.G. Bailey, Z.J. Wu

Publisher page

Abstract

This paper investigates the effectiveness of bonding non-prestressed and prestressed carbon fibre reinforced polymer (CFRP) plates to the tension surface of concrete column-slab connections in both the serviceability and ultimate limit state. For the prestressed plates different prestressing forces were applied to the CFRP as part of the strengthening technique. The structural response of the strengthened specimens was compared with a non-strengthened reference specimen in terms of punching shear strength, deflection profile, strain, crack opening displacement and failure modes. It was found that using prestressed CFRP plates improved the serviceability; in terms of deflection and cracking, but did not enhance the ultimate behaviour as much as the non-prestressed CFRP plates. The development of the critical diagonal crack (CDC) was the main reason for the reduction in the ultimate capacity of the strengthened slabs. © 2013 Elsevier Ltd. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. ISE, Interim guidance on the design of reinforced concrete structures using fibre composite reinforcement. Institution of Structural Engineers (ISE): London; 1999.
2. CSA, Design and construction of building components with fibre reinforced polymers. Canadian Standards Association International (CSA): Toronto; 2002.
3. ACI, Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures (ACI 440.2R-08). American Concrete Institute; 2008. p. 45.
4. Behavior of concrete columns confined by fibre composites10.1061/(ASCE)0733-9445(1997)123:5(583) ↗
5. Flexural rehabilitation of reinforced concrete beams by the use of prestressed advanced composite plates10.1016/S0266-3538(98)00002-5 ↗
6. Effect of material configuration on strengthening of concrete slabs by CFRP composites10.1016/j.compositesb.2005.05.015 ↗
7. Bond-slip models for FRP sheets/plates bonded to concrete10.1016/j.engstruct.2005.01.014 ↗
8. Cross sectional shape effects on the performance of post-heated reinforced concrete columns wrapped with FRP composites10.1016/j.compstruct.2010.09.012 ↗
9. Use of fiber-reinforced polymers in slab-column connection upgrades
10. Punching shear strength of reinforced concrete slabs strengthened with glass fiber-reinforced polymer laminates
11. Moe j. Shearing strength of reinforced concrete slabs and footings under concentrated loads. In: Development Department Bulletin No. D47. Portland Cement Association: Skokie; 1961. p. 130.
12. Fiber-reinforced polymer strengthening of two-way slabs
13. CFRP strengthening for punching shear of interior slab-column connections10.1061/(ASCE)1090-0268(2006)10:5(410) ↗
14. Punching shear of two-way slabs retrofitted with prestressed or non-prestressed CFRP sheets10.1177/0731684409103143 ↗
15. ASTM (D 3039/D 3039M): standard test method for tensile properties of polymer matrix composite materials; 2002.
16. Eurocode 2; design of concrete structures: BS EN 1992-1-1and BS EN 1992-1-2; 2004.
17. Abdullah AM. Analysis of repaired/strengthened R.C. structures using composite materials: punching shear. In: School of MACE. Manchester university: Manchester; 2010.
18. Punching tests of slabs with low reinforcement ratios
19. Kinnunen S, Nylander H. Punching of concrete slabs without shear reinforcement, Transactions, No. 158. Royal Institute of Technology: Stockholm, Sweden; 1960.
20. Analytical computation of the punching strength of reinforced concrete
21. Tests of column-flat plate connections
22. ACI 318: building code requirements for structural concrete; 2004.