journal article·2006-12

Freeze–thaw and thermal degradation influence on the fracture properties of carbon and glass fiber reinforced polymer concrete

J.M.L. Reis, A.J.M. Ferreira

Publisher page

Abstract

Abstract In recent years, it has been found that some concrete structures, even for some high performance concrete and ready mixed concrete under good quality control, start to deteriorate long before reaching their designed service life. Cracks are found after the structure has been completed for a few years, which results in the shortening of service life and lowering in durability. In this paper, the influence on the fracture properties of fiber reinforced polymer concrete, FRPC, subjected to freeze–thaw and thermal degradation, is discussed. The study on the damage influence was conducted using a climate chamber to perform the temperature changes on the single edge notched beams. FRPC specimens were subjected to freeze–thaw and higher temperature cycles and then tested according to RILEM standards. To determine the stress intensity factor, K Ic , critical crack tip opening displacement CTODc, the Two Parameter Method was used and the fracture energy, G f of the specimens was calculated to evaluate the fracture properties of FRPC. Three-point bending tests were carried out on notched beams with a clip gauge attached to measure the crack mouth opening displacement CMOD. Polymer concrete was reinforced with short glass and carbon fiber with 1% and 2% in mass respectively, to determine whether the reinforcement increases the performance of the material. The fracture properties of FRPC are reported in such conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. Junjian Cao, Vipulanandan C, Behavior of carbon fiber polymer concrete. Poster presentation in CIGMAT 2000, University of Houston, Texas; 2000.
2. An assessment of the properties and degradation behaviour of glass-fibre-reinforced polyester polymer concrete10.1016/S0266-3538(00)00147-0 ↗
3. Bubani M, Soraru G, Tasssone P. Mechanical durability of a polymer concrete: a Vickers indentation study of the strength degradation process. In: Proceedings of 5th international congress on polymers in Concrete, Honolulu, Hawaii; 2001.
4. Letsch R. Behaviour of polymer mortars at constant and changing temperatures. In: Proceedings of 5th international congress on polymers in concrete. Honolulu, Hawaii; 2001.
5. Reis JML, Ferreira AJM. Fracture properties of polymer concrete. Proceedings of 8th Portuguese conference on fracture, Vila Real, Portugal; 2002. p. 417–21.
6. Fracture behavior of glass fiber reinforced polymer concrete10.1016/S0142-9418(02)00063-6 ↗
7. Shah · 1991
8. Determination of fracture energy of mortar and concrete by means of three point bend tests on notched beams, draft RILEM recommendation. Mater Struct, vol. 18, no. 106; 1985.10.1007/BF02498757 ↗
9. Towards a measure of Gf: an analysis of experimental results
10. Behaviour of epoxy and polyester resin concrete (in Portuguese)
11. RILEM PC2, Technical Committee TC-113. Method of making polymer concrete and mortar specimens. In: Symposium on properties and test methods for concrete–polymer composites, Oostende, Belgium; 1995. p. 129–32.
12. Reis JML, Ferreira AJM, Freeze–Thaw resistance of epoxy polymer concrete.In: Proceedings of international conference on polymer concrete, Mortars and Asphalts; Porto; 2002. p. 101–11.
13. Setzer MJ , The micro ice lens pump-A new sight of frost attack an frost testing. In: Proceedings of the 3rd international conference on concrete under severe conditions, Vancouver, Canada; 2001. p. 428–38.