Investigation of the deformation properties of asphalt mixtures with DIC technique
Source abstract
Abstract
Abstract It is hardly to address the mechanical behavior with the classic measurement techniques accurately, which is very important for asphalt mixture and pavement deign. To obtain more experimental information of the asphalt mixture failure processes to improve the identification procedures for this type of material, DIC technique and IDT test are employed in this study. It is found that the information obtained by DIC system is very useful to investigate the deformation and fracture propertied accurately. It is also found that the distribution of aggregate and asphalt mortar will affect the distribution of strains because the module difference between aggregate and asphalt mortar. So the appropriate length of analysis should be determined to achieve the required accuracy and increase computational efficiency; the Poisson’s ratio of asphalt mixture under 25 °C is not a constant, which is effected by load and gyratory compaction times. And because the formulas for calculating strain suggested in Chinese specification are introduced by the linear elasticity theory, and Poisson’s ratio is a constant, it is not appropriate for the calculation of horizontal deformation, especially in the larger stress conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Ultrasonics and Acoustic Wave Propagation · Structural Health Monitoring Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Modeling and experimental evaluation of influence of aggregate blending on asphalt mixture strength10.3141/2180-06 ↗
2. Performance evaluation of a high durability asphalt binder and a high durability asphalt mixture for bridge deck pavements10.1016/j.conbuildmat.2008.01.001 ↗
3. A viscoplastic constitutive model for hot mix asphalt in compression at high confining pressure10.1016/j.conbuildmat.2010.12.025 ↗
4. Investigation of rutting performance of asphalt mixtures containing polymer modifiers10.1016/j.conbuildmat.2005.08.014 ↗
5. Micromechanical model for heterogeneous asphalt concrete mixtures subjected to fracture failure10.1061/(ASCE)MT.1943-5533.0000004 ↗
6. Fatigue crack propagation model of asphalt concrete based on viscoelastic fracture mechanics10.3141/2181-02 ↗
7. An experimental-numerical analysis of fracture process zone in concrete fracture specimens10.1016/0013-7944(90)90179-K ↗
8. Experimental testing to determine concrete fracture energy using simple laboratory test setup
9. Lytton RL, Uzan J, Fernando EG, Roque R, Hiltunen D, Stoffels S. Development and validation of performance prediction models and specifications for asphalt binders and paving mixtures. J Report SHRP-A-357. Washington, (DC, USA): Strategic Highway Research Program; 1993.
10. Buttlar WG, Roque R. Development and evaluation of the strategic highway research program measurement and analysis system for indirect tensile testing at low temperature. J Report TRB1454. Washington, (DC, USA): Transportation Research Board; 1994.
11. The evaluation of Poisson’s ratio and the modulus of materials of a low tensile resistance by the Brazilian test with particular reference to concrete
12. Micromechanical fracture modeling of asphalt concrete using a single-edge notched beam test10.1617/s11527-008-9412-8 ↗
13. Size effects in concrete fracture – Part II: Analysis of test results10.1023/A:1007677705861 ↗
14. Generalized spatial-gradient-based digital image correlation for displacement and shape measurement with subpixel accuracy10.1243/03093247JSA546 ↗
15. Determination of displacements using an improved digital correlation method10.1016/0262-8856(83)90064-1 ↗
16. Various experimental applications of digital image correlation method
17. Shear localization and damage in AA5754 aluminum alloy sheets10.1007/s11665-008-9224-6 ↗
18. An optical strain measurement system for asphalt mixtures10.1617/s11527-008-9392-8 ↗
19. Analysis of cracks and deformations in a full scale reinforced concrete beam using a digital image correlation technique10.1007/s11340-010-9384-9 ↗
20. Digital image correlation analysis of crack behavior in a reinforced concrete beam during a load test10.1139/l06-106 ↗
21. Correlation between shape of aggregate and mechanical properties of asphalt concrete digital image processing approach
22. Geometrical evaluation and experimental verification to determine representative volume elements of heterogeneous asphalt mixtures10.1520/JTE102674 ↗
23. Strain localization and damage distribution in SBS polymer modified asphalt mixtures10.1080/14680629.2010.9690312 ↗
24. http://www.correlatedsolutions.com/index.php/products/vic-3d-2010.
25. Memoire sur la Torsion des Prismes
26. http://en.wikipedia.org/wiki/Poisson%27s_ratio.