Enhancing the addition of fly ash from thermal power plants in activated high belite sulfoaluminate cement
Source abstract
Abstract
Abstract This study focuses on the activation of belite to promote the addition of solid industrial waste, such as fly ash (FA), as the supplementary component in high belite–sulfoaluminate cement (HBSC). The results indicate that the polymorph of belite, which transforms from β to α′, principally depends on the concentration of sodium tetraborate. The incorporation of FA into inactivated HBSC is very slow because the inactivated belite is unable to participate in the early hydration process to release calcium hydroxide (CH) and break the glass structure of FA. Compared with the inactivated belite, considerable hydration heat is released during the early hydration process in activated HBSC, in which a large amount of CH is present to promote the pozzolanic reaction of FA. In addition, (Na,Ca) 8 (Si,Al) 12 O 24 (SO 4 ) 2 is formed in the presence of sodium, which is a tectosilicate mineral with a bulk modulus that contributes to the compressive strength of the later period. The highest total content of FA in the activated HBSC, compared to inactive HBSC, improved from 5% to 12%. Thus, FA promotes the use of solid industrial waste and reduces the consumption of HBSC. Furthermore, the long term strength development with a large amount of FA can meet the requirements for engineering projects.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Nuclear materials and radiation effects
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Sustainable development and climate change initiatives10.1016/j.cemconres.2007.09.008 ↗
2. Belite Portland clinkers. Synthesis and mineralogical analysis10.3989/cyv.2005.v44.i3.433 ↗
3. Development of the use of sulfo- and ferroaluminate cements in China10.1680/adcr.1999.11.1.15 ↗
4. High belite cements – present status and future technological options.110.1016/0008-8846(96)00099-3 ↗
5. Investigations on energy saving cements
6. Performance of belite–sulfoaluminate cements10.1016/S0008-8846(01)00543-9 ↗
7. Active iron-rich belite sulfoaluminate cements: clinkering and hydration10.1021/es101785n ↗
8. Preparation of sulfoaluminate belite cement from fly-ash10.1016/0008-8846(94)90030-2 ↗
9. Generalized Bogue computatiqns to forecast the mineralogical composition of sulfoaluminate cements based on fly ashes
10. Sulfoaluminate-belite cement from low-calcium fly ash and sulfur-rich and other industrial by-products10.1016/S0008-8846(99)00072-1 ↗
11. Industrially interesting approaches to “low CO2” cements10.1016/j.cemconres.2004.01.021 ↗
12. Use of industrial byproducts as alumina sources for the synthesis of calcium sulfoaluminate cements10.1021/es2005144 ↗
13. Influence of alkalis on the composition of belite-rich cement clinkers and the technological properties of the resulting cements10.1016/0008-8846(86)90117-1 ↗
14. GS L, Gartner E.M. High belite containing sulfoaluminate clinker. World patent application WO2006/018569A2 2006.
15. LGSWGG E.M. Formation and hydration of low-co2 cement based on belite, calcium sulfoaluminate and calcium aluminoferrite. In: 12th International congress on the chemistry of cement, Montreal, 2007.
16. Synthesis of pure Portland cement phases10.1016/j.cemconres.2009.07.013 ↗
17. Hydration of fly ash portland cements10.1016/0008-8846(84)90126-1 ↗
18. Studies on portland cement with large amount of slag10.1016/S0008-8846(00)00208-8 ↗
19. Hydration of iron–phosphorus doped dicalcium silicate phase10.1016/j.matchemphys.2005.04.047 ↗
20. Effects of water–cement ratio and curing time on the critical pore width of hardened cement paste10.1016/j.conbuildmat.2008.08.011 ↗
21. A thermodynamic approach to the hydration of sulphate – resisting portland cement10.1016/j.wasman.2006.01.023 ↗
22. EXPGUI, a graphical user interface for GSAS10.1107/S0021889801002242 ↗
23. Rigid body refinements in GSAS/EXPGUI10.1154/1.3661125 ↗
24. Phase development in conventional and active belite cement pastes by Rietveld analysis and chemical constraints10.1016/j.cemconres.2009.06.017 ↗
25. Rietveld quantitative amorphous content analysis10.1107/S0021889801002485 ↗
26. Mechanisms of cement hydration10.1016/j.cemconres.2010.09.011 ↗
27. Hydration of calcium sulfoaluminate cements – experimental findings and thermodynamic modelling10.1016/j.cemconres.2009.08.014 ↗
28. The paste hydration of brownmillerite with and without gypsum: a time resolved synchrotron diffraction study at 30, 70, 100 and 150°C10.1039/B313215C ↗
29. Studies on blended cement with a large amount of fly ash10.1016/S0008-8846(02)00757-3 ↗
30. Hydration process of cement containing fly ash and silica fume – the first 24h10.1016/S0008-8846(97)00025-2 ↗
31. GB175 CNS. Common Portland Cement. 2007.
32. Synchrotron X-ray diffraction study of hauyne at high pressure10.1016/j.physb.2011.08.098 ↗
33. The influence of gypsum ratio on the mechanical performance of slag cement accelerated by calcium sulfoaluminate cement10.1016/j.conbuildmat.2010.09.015 ↗