Determination of 3D porosity in steel fibre reinforced SCC beams using X-ray computed tomography
Source abstract
Abstract
Abstract The conducted research programme was focused on air voids in fibre reinforced SCC. There were used two types of crimped steel fibres. Properties of fresh mix were checked. The specimens in a form of beams with fibre volumes ranging from 0% to 1.5% have been non-destructively tested using X-ray computed tomography. Total volume of air, its distribution and spacing analysis have been performed. The air voids number and their volume were evaluated along the beam main axis. The amount of air trapped in the upper and lower beam halves has been analyzed. The uniformity of spacing of air voids was assessed and discussed as well as volume distribution.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Bartos PJM, Sonebi M, Tamimi AK, editors. Workability and rheology of fresh concrete: compendium of tests – report of RILEM TC 145-WSM; 2002.
2. Billberg PH, et al. Field validation of models for predicting lateral form pressure exerted by SCC. Cem Concr Compos [in press], http://dx.doi.org/10.1016/j.cemconcomp.2014.02.003.10.1016/j.cemconcomp.2014.02.003 ↗
3. Flowability of fibre-reinforced concrete and its effect on the mechanical properties of the material10.1016/j.conbuildmat.2010.02.025 ↗
4. Cichocki K, Ruchwa M. Robustness oriented analysis of structures under extreme loads. In: Proceedings of 19th international conference on computer methods in mechanics – CMM-2011, 9–12 May 2011, Warsaw, Poland. p. 155–6.
5. Cichocki K, Ruchwa M. Propagation of damage in structures under blast load. In: Proceedings of 57th annual conference on scientific problems of civil engineering, Krynica-Rzeszów, Poland, 18–22 September 2011. p. 98–9.
6. EFNARC: Specification and guidelines for self-compacting concrete, February 2002, Farnham, UK.
7. A comprehensive methodology to test the performance of steel fibre reinforced self-compacting concrete (SFR–SCC)10.1016/j.conbuildmat.2012.07.057 ↗
8. Relationships between fibre distribution, workability and the mechanical properties of SFRC applied to precast roof elements10.1617/s11527-005-9017-4 ↗
9. Use of small beams to obtain design parameters of fibre reinforced concrete10.1016/j.cemconcomp.2007.10.004 ↗
10. Fatigue resistance and cracking mechanism of concrete pavements reinforced with recycled steel fibres recovered from post-consumer tyres10.1016/j.engstruct.2012.06.030 ↗
11. Hounsfield GN. Computed medical imaging, Nobel Lecture; 1976.
12. Ibáñez L, Schroeder W, Ng L, Cates J. The ITK Software Guide, Kitware; 2005.
13. Investigation on the flexural behavior of UHPCC considering the effect of fiber orientation distribution10.1016/j.conbuildmat.2011.07.003 ↗
14. The effect of fibre distribution characteristics on the flexural strength of steel fibre-reinforced ultrahigh strength concrete10.1016/j.conbuildmat.2010.11.057 ↗
15. Properties of precast SFRCC beams under harmonic load10.1515/SECM.2008.15.2.107 ↗
16. Median diameter as a grading characteristic for fine aggregate cement composite designing10.1016/j.conbuildmat.2012.04.050 ↗
17. Quality and mechanical properties of engineered steel fibres used as reinforcement for concrete10.1016/j.conbuildmat.2012.02.058 ↗
18. Optimization of fibre reinforcement for waste aggregate cement composite10.1016/j.conbuildmat.2012.09.057 ↗
19. Determination of air-void parameters of hardened cement-based materials using X-ray computed tomography10.1016/j.conbuildmat.2012.07.012 ↗
20. Large volume, high-performance applications of fibers in civil engineering10.1002/app.2263 ↗
21. The influence of selected new generation admixtures on the workability, air-voids parameters and frost-resistance of SCC10.1016/j.conbuildmat.2011.12.107 ↗
22. Effect of viscosity type modifying admixture on porosity, compressive strength and water penetration of high performance self-compacting concrete10.1016/j.conbuildmat.2013.07.076 ↗
23. X-ray computed tomography and nondestructive evaluation of clogging in porous concrete field samples10.1061/(ASCE)MT.1943-5533.0000484 ↗
24. Malhotra · 2005
25. Maidl · 1995
26. Mehta · 2006
27. Nawy · 1996
28. Mix design for self-compacting concrete
29. Self-compacting concrete10.3151/jact.1.5 ↗
30. Flexural behavior of self-compacting concrete reinforced with different types of steel fibers10.1016/j.conbuildmat.2013.05.072 ↗
31. Piecuch I, Piecuch T. Environmental education and its social effects, annual set – the environment protection (Rocznik Ochrona Środowiska), vol. 15, part 1; 2013. p. 192–212.
32. PN-EN 12350-6: 2011. Testing fresh concrete – Part 6: density; polish version.
33. The rheological and mechanical properties of steel fibres reinforced self compacting concrete
34. The effect of casting by local moulds filling on the steel fibres distribution of self-compacting concrete beams and their strength
35. The new approach to the study of random distribution of fibres in high performance self-compacting concrete
36. Promentilla MAB, Sugiyama T, Shimura K. Three dimensional characterization of air void system in cement-based materials. In: Proceedings of 3rd Asian concrete federation (ACF) international conference, Ho Chi Minh, Vietnam; 2008. p. 940–7.
37. Determination of steel fibers orientation in SCC using computed tomography and digital image analysis methods
38. Workability of hybrid fiber reinforced self-compacting concrete10.1016/j.buildenv.2004.12.014 ↗
39. de Schutter · 2008
40. Radiographic observation and semi-analytical reconstruction of fracture process zone in silicate composite specimen