journal article·2014-03

The behavior of horizontally glued laminated beams using rubber wood

Yashida Nadir, Praveen Nagarajan

Publisher page

Abstract

Abstract The process of manufacturing engineered wood products (EWP) is an effective technique for reducing or eliminating the negative properties of solid wood materials and for obtaining high performance materials. However, there is a dearth of information regarding the studies in glued laminated timber, one among the EWP, in India. Thus, this paper describes an experimental program which examines the flexural properties of horizontally glued laminated timber utilizing rubber wood, a sustainable, plantation grown timber in the country. The experimental test program involved the fabrication and testing in flexure of horizontally glued laminated rubber wood using polyvinyl acetate adhesive, with different lamina thickness and jointed laminas. The study also evaluated the joint efficiency, wood adhesive bond strength and the durability of the adhesive bond. The test results obtained show that the comparison of flexural properties between solid wood and horizontally glued laminated wood have no significant difference. Lamina thickness does not make any statistically significant difference in the flexural properties. Laminated beam and jointed laminated beam with the same lamina thickness have no significant difference in the flexural properties. The wood adhesive bond strength and the wood failure percentage obtained are appreciable. The experimental results obtained and a comparison with code provisions verifies the suitability of the wood species for composite products.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Wood Treatment and Properties · Natural Fiber Reinforced Composites · Tree Root and Stability Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Factors affecting ultimate strength of solid and glulam timber beams
2. Evaluation of the mechanical properties of Douglas-fir and Japanese cedar lumber and its structural glulam by nondestructive techniques10.1016/j.conbuildmat.2006.11.012 ↗
3. Effects of layer arrangements on bending strength properties of laminated lumber made of poplar (Populus nigra L.)
4. Compression, cleavage, and shear resistance of composite construction materials produced from softwoods and hardwoods10.1002/app.24153 ↗
5. Performance of glued laminated beams made from small diameter fast growing tree species10.3923/jbs.2010.37.42 ↗
6. The performance of laminas thickness for horizontally glued laminated beam
7. Bending strength properties of glued laminated timber from selected Malaysian hardwood timber
8. Effect of moisture content on some physical and mechanical properties of juvenile rubberwood (Hevea brasiliensis Muell Arg)
9. Bending direction in laminates
10. Thelandersson · 2003
11. American Society for Testing and Materials. Standard test methods for static tests of lumber in structural sizes. ASTM D 198-09. ASTM, West Conshohocken, Pa, 2009.
12. Jeff. Editor and Consultant. Timber Construction Manual, American Institute of Timber Construction, 6th ed., Wiley & Sons, 2012.10.1002/9781118279687 ↗
13. Ronald W Jokerst. Finger jointed wood products, U.S Department of Agriculture Forest Service Research Paper; FPL 382, Forest Products Laboratory, Madison, Wis, 1981
14. American Society for Testing and Materials. Standard test methods for small clear specimens of timber. ASTM D 143-09. ASTM, West Conshohocken, Pa, 2009.
15. American Society for Testing and Materials. Standard test methods for strength properties of adhesive bonds in shear by compression loading. ASTM D 905-08∊1. ASTM, West Conshohocken, Pa, 2009.
16. Huining Xiao, Wenchang Wang, Ying H Chui. Evaluation of shear strength and percent wood failure criteria for qualifying new structural adhesives, Research report. University of New Brunswick, Canada, July 2007.
17. Indian Standards Institution. Performance requirements of adhesives for structural laminated wood products for use under exterior exposure conditions. IS 9188-1979, Indian Standard Institution, New Delhi, 1980.
18. Effect of glue type on flexural and tensile properties of finger-jointed tropical African hardwoods
19. Structural performance of the finger-jointed strength of some wood species with different joint configurations10.1016/j.conbuildmat.2007.03.020 ↗
20. Statistical design and orthogonal polynomial model to estimate the tensile fatigue strength of wooden finger joints10.1016/S0142-1123(02)00077-4 ↗
21. American Society for Testing and Materials. Standard test methods for integrity of adhesive joints in structural laminated wood products for exterior use. ASTM D 1101-97a (Reapproved 2006). ASTM, West Conshohocken, Pa, 2006.
22. Charles R. Frihart, Christopher G. Hunt. Adhesives with Wood Materials Bond Formation and Performance. Wood Handbook-Wood as an engineering material. Centennial Edition, Forest Products Laboratory, US Department of Agriculture Forest Service, general technical report; FPL-GTR-190, 2010. p.508
23. Petrie Edward M. Improving the moisture and heat resistance of PVAc wood adhesives. Special Chem adhesives and sealants, Formulation, bulletin April 25, 2007.
24. Sepehr Rahili Khorasan. Finite element simulations of glulam beams with natural cracks. Master’s Degree Thesis, Blekinge Institute of Technology, Sweden, 2012.
25. Walter MG Burdzik. Finger joint strength-A laminated beam strength predictor. Research Note, Southern African Forestry Journal, No. 178. March 1997.10.1080/10295925.1997.9631137 ↗
26. Vanerek J, Hradil P. Evaluation of timber beams reinforced with FRP fabrics. Asia-Pacific conference on FRP in structures, 2007 (APFIS 2007).
27. Timber designers’ manual
28. Indian Standards Institution. Design of structural timber in building-Code of practice. IS 883-1994, Bureau of Indian Standards, New Delhi, 1994.