To what extent does the fiber orientation affect mechanical performance?
Source abstract
Abstract
Abstract Design of fiber-reinforced structural elements rose as a need in the last decades with an increasing use of fibers in concrete. Fiber orientation is an important phenomenon and it was shown that fiber orientation state effects mechanical performance to some extent. Measuring fiber orientation state is possible, unfortunately is not yet sufficient to predict mechanical performance. Therefore, relatively new guidelines used for design of fiber-reinforced elements propose using representative specimens which mimic real structures to pre-evaluate structural performance. In the present research the effects of various parameters on fiber orientation state was investigated and a comparison was made by using the results obtained from related literature. The comparison showed that similar orientation states could be obtained by following pre-defined procedures. Yet, that does not provide similar mechanical performances. To predict mechanical strength, research should concentrate on combining different factors that affect resulting performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Fibre reinforced concrete: new design perspectives10.1617/s11527-009-9529-4 ↗
2. Characterization of the orientation profile of steel fiber reinforced concrete10.1617/s11527-010-9686-5 ↗
3. ACI544.4R. Design considerations for steel fiber reinforced concrete. American Concrete Institute, ACI Farmington Hills; 2009.
4. CNR-DT204. Guidelines for the design, manufacturing and control of SFRC structures. Italy: Italian National Research Council; 2006.
5. AFGC-SETRA. Ultra high performance fiber reinforced concretes, Interim Recommendations. France: AFGC Publication; 2002.
6. CEB-FIP. fib Model Code 2010. international federation for structural concrete; 2010.
7. The use of tensors to describe and predict fiber orientation in short fiber composites10.1122/1.549945 ↗
8. Monitoring fiber dispersion in fiber reinforced cementitious materials: comparison of AC-impedance spectroscopy and image analysis
9. Determination of non-symmetric 3-D fiber orientation distribution and average fiber length in short-fiber composites10.1177/002199839703101302 ↗
10. Fibre-orientation measurements in short-glass-fibre composites. Part I: Automated, high angular-resolution measurement by confocal microscopy10.1016/S0266-3538(01)00038-0 ↗
11. Fibre orientation in short-fibre-reinforced thermoplastics. II. Quantitative measurements by image analysis10.1016/S0266-3538(98)00101-8 ↗
12. Characterisation of fibres distribution in a steel fibre reinforced concrete with electrical resistivity measurements10.1016/j.ndteint.2008.03.008 ↗
13. A magnetic method for non destructive monitoring of fiber dispersion and orientation in steel fiber reinforced cementitious composites – Part 1: method calibration10.1617/s11527-011-9793-y ↗
14. Non-destructive monitoring of fiber orientation using AC-IS: An industrial-scale application10.1016/j.cemconres.2006.05.026 ↗
15. Ozyurt N, Tregger, N, Ferrara, L, Sanal, I, Shah, S.P. Adapting fresh state properties of fiber-reinforced cementitious material for high performance thin-section elements. In: Wallevik OH, Kubens, S., Oesterheld, S., editor. In: 3rd international RILEM symposium on rheology of cement suspensions such as fresh concrete. Reykjavik, Iceland: RILEM Publications S.A.R.L.; 2009.
16. High mechanical performance of fibre reinforced cementitious composites: the role of “casting-flow induced” fibre orientation10.1617/s11527-010-9613-9 ↗
17. Rheological behavior of fresh cement pastes formulated from a self compacting concrete (SCC)10.1016/j.cemconres.2004.10.036 ↗
18. Ozyurt N. Connecting fiber dispersion, rheology and mechanical performance for fiber reinforced cement based materials: Istanbul Technical University; 2006.
19. JSCE-SF4. Method of tests for flexural strength and flexural toughness of steel fiber reinforced concrete. Japan: Japan Society of Civil Engineering; 1984.
20. Toughness characterization of steel fiber-reinforced concrete by JSCE approach10.1016/S0008-8846(00)00212-X ↗
21. The effect of fibre distribution characteristics on the flexural strength of steel fibre-reinforced ultra high strength concrete10.1016/j.conbuildmat.2010.11.057 ↗
22. The relation between fiber orientation and tensile behavior in an ultra high performance fiber reinforced cementitious composites (UHPFRCC)10.1016/j.cemconres.2011.05.009 ↗
23. Simple tools for fiber orientation prediction in industrial practice10.1016/j.cemconres.2011.05.008 ↗
24. The motion of ellipsoidal particles immersed in a viscous fluid