Rheological evaluations of interground and blended cement–limestone suspensions
Source abstract
Abstract
Abstract This paper reports a comparative study of the rheological properties of suspensions composed using ordinary portland cement (OPC), interground with, and blended with limestone. Two different interground portland limestone cements (PLCs) and three blended limestone cements were examined. The blended mixtures were prepared using the same limestone content (by replacement) as the interground mixture, and blended to match the particle size distribution (PSD) of the plain OPC and interground PLCs. This methodology was used to separate the influence of packing and surface area from the influence of the limestone incorporation technique (i.e., intergrinding or blending). The results indicate that the inclusion of limestone decreases the yield stress due to reduced van der Waals forces between limestone-to-OPC particles, as compared to OPC-to-OPC particle interactions. The plastic viscosity is noted to be independent of the limestone replacement level, and dependent solely on the volumetric solid loading and PSD of the solids in the suspension. Intergrinding of limestone is shown to have beneficial effects on the yield stress compared to PSD-matched OPC–limestone blends, due to coarser OPC fraction in the interground PLC as compared to the blended mixture. Finally, via oscillatory shear experiments, the use of a stress plateau identification technique is demonstrated to be an accurate means to identify the yield stress in cementitious suspensions all suspensions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Limestone filler cement in low w/c concrete: a rational use of energy10.1016/S0008-8846(02)01087-6 ↗
2. Caldarone · 2008
3. Limestone fillers conserve cement: part 1: an analysis based on powers model
4. Hawkins P, Tennis P, Detwiler R. The use of limestone in portland cement: a state-of-the-art review. EB227 Portland Cem Assoc, Skokie IL 2003;44.
5. Hydration mechanisms of ternary Portland cements containing limestone powder and fly ash10.1016/j.cemconres.2010.11.014 ↗
6. Influence of limestone on the hydration of Portland cements10.1016/j.cemconres.2008.01.002 ↗
7. Hydration and strength development in ternary portland cement blends containing limestone and fly ash or metakaolin10.1016/j.cemconcomp.2013.03.028 ↗
8. A comparison of intergrinding and blending limestone on reaction and strength evolution in cementitious materials10.1016/j.conbuildmat.2013.02.032 ↗
9. A study of the intergrinding of clinker and limestone10.1016/S0892-6875(99)00068-0 ↗
10. Grinding technical questions of producing composite cement10.1016/0301-7516(95)00046-1 ↗
11. Effects of shape and packing density of powder particles on the fluidity of cement pastes with limestone powder10.3151/jact.7.347 ↗
12. Influence of superplasticizers on the rheology and stability of limestone and cement pastes10.1016/j.cemconres.2008.01.015 ↗
13. Rheology of cementitious paste with silica fume or limestone10.1016/j.cemconres.2007.08.012 ↗
14. The rheological properties of ternary binders containing portland cement, limestone, and metakaolin or fly ash10.1016/j.cemconres.2013.07.007 ↗
15. The yield stress—a review or “παντα ρει”—everything flows?10.1016/S0377-0257(98)00094-9 ↗
16. Vance, Kirk. Early age characterization and microstructural features of sustainable binder systems for concrete. PhD Dissertation. Arizona State University, 2014.
17. Influence of particle size distributions on yield stress and viscosity of cement–fly ash pastes10.1016/j.cemconres.2011.11.006 ↗
18. Influence of the shape and roughness of inclusions on the rheological properties of a cementitious suspension10.1016/j.cemconcomp.2008.01.003 ↗
19. Dispersion forces in cement suspensions10.1016/j.cemconres.2003.08.019 ↗
20. Aqueous CaCO3 dispersions as reference systems for early-age cementitious materials10.1016/j.colsurfa.2006.06.042 ↗
21. Theory of the stability of lyophobic colloids10.1016/0095-8522(55)90030-1 ↗
22. Interaction between two hydrophobic colloidal particles, using the approximate Debye-Hückel theory. I. General properties10.1039/TF9393501125 ↗
23. Hunter · 1987
24. Interparticle potential and sedimentation behavior of cement suspensions: effects of admixtures10.1016/S1065-7355(98)00005-4 ↗
25. Interparticle potential and sedimentation behavior of cement suspensions: review and results from paste
26. ASTM C1157/C1157M-11 · 2013
27. ASTM C305-13 · 2013
28. ASTM C150/C150M-12 · 2012
29. Rheology of concentrated suspensions10.1002/app.1971.070150818 ↗
30. The rheological properties of suspensions of rigid particles10.1002/aic.690220303 ↗
31. ASTM C1738-11a · 2011
32. Effect of slip on the flow properties of cement slurries
33. The influence of wall slip on yield stress and viscoelastic measurements of cement paste10.1016/S0008-8846(00)00440-3 ↗
34. Investigation by atomic force microscopy of forces at the origin of cement cohesion10.1016/S0304-3991(00)00091-7 ↗
35. Microscopic physical basis of the poromechanical behavior of cement-based materials10.1007/BF02481622 ↗
36. Rheology of fresh cement and concrete
37. Effect of content and particle size distribution of high-calcium fly ash on the rheological properties of cement pastes10.1016/S0008-8846(97)00073-2 ↗
38. Rheological properties of cement mixes: IV. Effects of superplasticizers on viscosity and yield stress10.1016/0008-8846(80)90085-X ↗
39. Barnes · 2000