Moment-rotation relationship of mortise-through-tenon connections in historic timber structures
Source abstract
Abstract
Abstract This paper investigates the moment-rotation relationship of historic timber structures. In particular, the embedded compressive mechanism of these connections subjected to cyclic loading was investigated and a simplified equation for predicting the moment-rotation relationship was derived. The analytical model was validated by using the results of three 1/3.2-scaled mortise-through-tenon connections, including one intact connection and two connections with a gap between the mortise and through-tenon, tested under quasi-static loading. Then, the so-validated model was used for extensive parametric analysis by changing different parameters, such as the gap between the mortise and through-tenon, friction coefficient and material properties of wood. It is shown that the friction coefficient and elastic modulus perpendicular to grain along the radial direction of wood had an influence on the moment-rotation relationship of the connections, especially for the initial stiffness and ultimate moment of the connections, and both of them increased with a larger friction coefficient and elastic modulus. However, with the increment of the gap between the mortise and through-tenon, the initial stiffness and ultimate moment decreased gradually.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Wood Treatment and Properties · Structural Engineering and Vibration Analysis · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Flexural behaviour of timber dovetail mortise–tenon joints10.1016/j.conbuildmat.2016.02.074 ↗
2. Structural performance of Dou-Gong brackets of Yingxian Wood Pagoda under vertical load – an experimental study10.1016/j.engstruct.2014.09.013 ↗
3. Modeling timber moment connection under reversed cyclic loading10.1061/(ASCE)0733-9445(2005)131:11(1757) ↗
4. Seismic vulnerability of historic Dieh-Dou timber structures in Taiwan10.1016/j.engstruct.2007.11.007 ↗
5. Ancient Chinese timber architecture I: experimental study10.1061/(ASCE)0733-9445(2001)127:11(1348) ↗
6. Low-cycle reversed loading tests study on typical mortise-tenon joints of traditional timber building based on friction mechanism
7. Structural stiffness identification of traditional mortise-tenon joints based on statistical process control chart10.1061/(ASCE)AS.1943-5525.0000894 ↗
8. Le · 2004
9. Li · 2008
10. Experimental study on the seismic performance of a double-span traditional timber frame10.1016/j.engstruct.2015.04.031 ↗
11. Analysis on mechanical behavior of dovetail mortise-tenon joints with looseness in traditional timber buildings10.12989/sem.2016.60.5.903 ↗
12. Liang · 1984
13. Meng · 2010
14. Moment-carrying capacity of dovetailed mortise and tenon joints with or without beam shoulder10.1061/(ASCE)ST.1943-541X.0000323 ↗
15. Wooden framed structures with semi-rigid connections: quantitative approach focused on design needs10.12989/sem.2009.31.3.315 ↗
16. Dynamic performance of a multi-story traditional timber pagoda10.1016/j.engstruct.2018.01.003 ↗
17. Xia · 2015
18. Experimental study on seismic behavior of damaged straight mortise-tenon joints of ancient timber buildings
19. Potential and energy dissipation-based seismic damage evaluation of ancient timber structure
20. Experimental studies on the characteristic of mortise-tenon joint in historic timber buildings
21. Experimental study on Chinese ancient timber frame building by shaking table test10.12989/sem.2011.40.4.453 ↗
22. Zhao · 2012