journal article·2020-03

Influence of artificial aggregate on mechanical properties, fracture parameters and bond strength of concretes

Süleyman İpek, Olabode Adekunle Ayodele, Kasım Mermerdaş

Publisher page

Abstract

Abstract The paper presented herein investigates the mechanical performance of concrete involving lightweight and normal weight aggregates with similar compressive strength. For this, two compressive strength values, 25 and 45 MPa, were considered for the concretes produced by normal and lightweight aggregates. Therefore, four concrete mixtures were designed at different water-to-cement ratios and cement contents. The lightweight aggregate utilized in this study was produced through cold bonding pelletization of fly ash and cement at ambient temperature in a specially designed tilted pan. The artificial lightweight aggregate used as a substitution of natural aggregate had similar particle size distribution to that of natural aggregate. The same mixing procedure was adopted to produce concrete and the testing specimens attained from each mixture were cured at the same circumstances. After the 28-day curing period, the specimens were tested for compressive strength and modulus of elasticity, splitting tensile and flexural strengths. Moreover, advanced mechanical properties such as fracture parameters, bond strength between embedded reinforcement and the concrete were also investigated. The test results indicated that it is possible to produce the lightweight aggregate concrete having similar compressive strength with the natural aggregate concrete, however, the utilization of artificial lightweight aggregates significantly influenced the investigated mechanical and fracture properties of the concretes despite having the similar compressive strengths. But, it was also observed that the utilization of lightweight aggregate made the concrete more ductile.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Fracture behavior and mechanical properties of concrete with artificial lightweight aggregate and steel fiber10.1016/j.conbuildmat.2015.03.054 ↗
2. Effect of steel fiber addition and aspect ratio on bond strength of cold-bonded fly ash lightweight aggregate concretes10.1016/j.conbuildmat.2013.05.059 ↗
3. Combined effect of steel fiber and metakaolin incorporation on mechanical properties of concrete10.1016/j.compositesb.2013.08.002 ↗
4. Properties of ultra-high performance fiber reinforced cementitious composites made with gypsum-contaminated aggregates and cured at normal and elevated temperature10.1016/j.conbuildmat.2015.05.130 ↗
5. Effect of steel fibers on the performance of concrete made with recycled concrete aggregates and dune sand10.1016/j.conbuildmat.2019.04.087 ↗
6. Mechanical properties of fibre reinforced concrete with recycled fibres10.1016/j.conbuildmat.2018.11.183 ↗
7. Effect of superplasticizer on the properties of medium strength concrete prepared with coconut fiber10.1016/j.conbuildmat.2018.06.150 ↗
8. Some characteristics of high strength fiber reinforced lightweight aggregate concrete10.1016/S0958-9465(02)00016-1 ↗
9. Recent trends in steel fibered high-strength concrete10.1016/j.matdes.2011.03.030 ↗
10. Strength and permeability properties of self-compacting concrete with cold bonded fly ash lightweight aggregate10.1016/j.conbuildmat.2014.10.032 ↗
11. Durability aspect of concretes composed of cold bonded and sintered fly ash lightweight aggregates10.1016/j.compositesb.2013.04.070 ↗
12. Effects of fly ash properties on characteristics of cold-bonded fly ash lightweight aggregates10.1016/j.conbuildmat.2006.05.038 ↗
13. Characteristics of lightweight aggregates for high strength concrete
14. ACAA, Ash Around the World. American Coal Ash Association, 2018, www.acca-usa.org.
15. Strength and durability of lightweight concrete10.1016/S0958-9465(02)00141-5 ↗
16. Shrinkage cracking of lightweight concrete made with cold-bonded fly ash aggregates10.1016/j.cemconres.2003.11.024 ↗
17. Crack growth mechanisms in four different concretes: microscopic observations and fractal analysis10.1016/S0008-8846(97)00221-4 ↗
18. BS EN 197-1. Cement composition, specifications and conformity criteria for common cements. British Standard, 2011.
19. ASTM C618-19. Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete, ASTM International, West Conshohocken, PA, 2019, www.astm.org.
20. Influence of volume fraction and characteristics of lightweight aggregates on the mechanical properties of concrete10.1016/j.conbuildmat.2009.02.038 ↗
21. ASTM C127-15. Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate, ASTM International, West Conshohocken, PA, 2015, www.astm.org.
22. ASTM C192/C192M-18, Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory, ASTM International, West Conshohocken, PA, 2018, www.astm.org.
23. Properties of lightweight aggregates produced with cold-bonding pelletization of fly ash and ground granulated blast furnace slag10.1617/s11527-012-9855-9 ↗
24. TS EN 12350-2. Beton – Taze Beton Deneyleri – Bölüm 2: Çökme (Slump) Deneyi. Turkish Standard, 2002.
25. ASTM C39/C39M-18. Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken, PA, 2018, www.astm.org.
26. ASTM C469/C469M-14, Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression, ASTM International, West Conshohocken, PA, 2014, www.astm.org.
27. ASTM C496/C496M-17, Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken, PA, 2017, www.astm.org.
28. RILEM 50-FMC, Committee of fracture mechanics of concrete. Determination of fracture energy of mortar and concrete by means of three-point bend tests on notched beams. Mater. Struct., 18(106), 285–290, 1985.10.1007/BF02472918 ↗
29. Optimisation of using lightweight aggregates in mitigating autogenous deformation of concrete10.1016/j.conbuildmat.2007.11.015 ↗
30. Theoretical basis of method to determine fracture energy GF of concrete10.1007/BF02472919 ↗
31. RILEM RC6. Recommendations for the testing and use of constructions materials bond test for reinforcement steel. 2. Pull-out test. p.3, 1996.
32. ACI 318, Building Code Requirements for Structural Concrete and Commentary (318R-08), American Concrete Institute, Farmington Hills, MI, 2008.
33. J.P. Ulfkjaer, R. Brincker, Fracture energy of normal strength concrete, high strength concrete and ultra high strength ultra ductile steel fibre reinforced concrete. Fracture Mechanics of Concrete Structures, Proceedings FRAMCOS-2, AEDIFICATIO Publishers, D-79104, Freiburg, 1995.