journal article·2015-06

Temperature sensitivity and model of stress relaxation properties of cement and asphalt mortar

Qiang Fu, You-Jun Xie, Guang-Cheng Long, Fei Meng, Hao Song

Publisher page

Abstract

Abstract The stress relaxation properties of two types of cement and asphalt mortar (CA mortar) in the temperature range of −40 to 60 °C and at the initial strain of 0.1% was studied by dynamic mechanical thermal spectrometer. The results show that the stress relaxation process of CA mortar can be divided into attenuation stress relaxation stage and steady stress relaxation stage. The lower the temperature is, the higher the initial stress and residual stress are. At the same temperature, the stress relaxation rate and specific stress relaxation of type I CA mortar are larger than that of type II CA mortar, while the initial stress, residual stress and stress relaxation modulus are relatively smaller. The glass transition region of type I CA mortar characterized by the isochronous stress–temperature curves is −20 to 0 °C. The established model agrees well with experimental results, and φ, δ are dominated parameters affecting the stress relaxation of CA mortar. This indicates that the established model can effectively predict the time dependence and temperature sensitivity of stress relaxation of CA mortar. The results can provide reference for the calculation of temperature stress of CA mortar filling layer of ballastless slab track.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Strength mechanism of cement–asphalt mortar10.1061/(ASCE)MT.1943-5533.0000301 ↗
2. Fractal characteristic of pore volume of cement and asphalt mortar
3. Technical characteristics of construction of Qinhuangdao-Shenyang passenger special line and the inspiration for high-speed railway
4. Hydration mechanisms, microstructure, and mechanical properties of mortars prepared with mixed binder cement slurry–asphalt emulsion10.1061/(ASCE)0899-1561(2003)15:1(54) ↗
5. Laboratory investigation into mechanical properties of cement emulsified asphalt mortar10.1016/j.conbuildmat.2014.04.113 ↗
6. Study of the rheological behavior of fresh cement emulsified asphalt paste10.1016/j.conbuildmat.2014.05.023 ↗
7. Development and utility of grout for a track structure with grout filled ballast
8. Comparative study on effects of binders and curing ages on properties of cement emulsified asphalt mixture using gray correlation entropy analysis10.1016/j.conbuildmat.2013.12.093 ↗
9. Study on the stress relaxation test of bituminous mixture
10. Study on asphalt mixture nonlinear viscoelastic model based on stress relaxation test
11. Study on long-term viscoelasticity of PVC
12. Tensile creep due to restraining stresses in high-strength concrete at early ages10.1016/j.cemconres.2005.11.017 ↗
13. Liu · 2006
14. Department of science and technology, the Ministry of Railways. Provisional Technical Conditions of CRTS Type I Cement and Asphalt Mortar for Ballastless Slab Track in Passenger Dedicated Railway Line; 2008 [in Chinese].
15. Department of science and technology, the Ministry of Railways. Provisional Technical Conditions of CRTS Type II Cement and Asphalt Mortar for Ballastless Slab Track in Passenger Dedicated Railway Line; 2008 [in Chinese].
16. Influence of asphalt on mechanical properties of cement and asphalt mortar
17. Strain rate effect and modeling of mechanical properties of CRTS type II cement and asphalt mortar
18. Creep properties of cement and asphalt mortar10.1016/j.conbuildmat.2014.07.103 ↗
19. Characterization of cement paste by dynamic mechanical thermo-analysis Part I: operative conditions10.1016/j.matchar.2005.10.007 ↗
20. Evaluation for low temperature performance of SBS modified asphalt using glass transition temperature
21. Experimental investigation on stress relaxation properties of silty mudstone under triaxial compression
22. The relaxation stiffness modulus of asphalt mixture
23. Basic creep behavior of concrete investigation of the physical mechanisms by using acoustic emission10.1016/j.cemconres.2011.07.011 ↗
24. Creep strain versus residual strain of a concrete loaded under various levels of compressive stress10.1016/j.cemconres.2013.04.005 ↗
25. Temperature sensitivity of mechanical properties of cement asphalt mortars
26. Characterization and constitutive modeling of stress-relaxation behavior poly (methyl methacrylate) (PMMA) across the glass transition temperature10.1016/j.mechmat.2014.01.003 ↗
27. Experimental study of nonlinear shear stress relaxation characteristics of nanning expansive soil
28. Experimental investigation on stress relaxation properties of silty mudstone under triaxial compression
29. Zhang · 2006
30. A mathematical model for creep, relaxation and strain stiffening in parallel-fibered collagenous tissues10.1016/j.medengphy.2011.04.012 ↗
31. Use of the generalized Maxwell model for describing the stress relaxation behavior of solid-like foods10.1016/j.jfoodeng.2005.12.011 ↗
32. Finite deformation of a polymer: experiments and modeling10.1016/S0749-6419(00)00073-5 ↗
33. Wu · 2008
34. Mathematical model for chemical stress relaxation of rubbers in aging