Properties of polymer modified steel fiber-reinforced cement concretes
Source abstract
Abstract
Abstract Polymer modified steel fiber-reinforced concretes were produced with addition of both steel fibers and a styrene butadiene rubber emulsion (SBR). Both flexural and compressive strength of the composites after 28 days curing were tested. Microstructures of the composites were analyzed by using scanning electron microscope and mercury intrusion porosimetry. Results show that the addition of steel fibers increases both flexural and compressive strength of the composites. The flexural strength increases significantly when containing 3–10 wt.% SBR. The optimal use of SBR is 5 wt.%. However, the compressive strength may decrease with the addition of SBR. When the addition arrives 10 wt.%, a 16% reduction is observed. The overall porosity and pore size distribution of the composites vary with SBR content. The addition of 3 or 5 wt.% SBR can refine the pore size distribution. Interweaving polymer films were observed in the composites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Crackong characteristics of reinforced steel fiber concrete beams under short- and long-term loadings10.1016/1065-7355(95)90013-6 ↗
2. Behaviour of normal and steel fiber-reinforced concrete under impact of small projectiles10.1016/S0008-8846(99)00174-X ↗
3. Flexural performance of ring-type steel fiber-reinforced concrete10.1016/S0008-8846(02)01093-1 ↗
4. Pullout behavior of steel fibers from cement-based composites10.1016/S0008-8846(97)00061-6 ↗
5. Tensile strength of steel fiber reinforced concrete10.1016/0008-8846(76)90122-8 ↗
6. Deformation and ultimate strength in flexure of reinforced concrete beams made with steel fiber concrete
7. Role of fibers in controlling unrestrained expansion and arresting cracking in Portland cement concrete undergoing alkali–silica reaction10.1016/S0008-8846(03)00245-X ↗
8. The effect of silica fume and steel fiber on the dynamic mechanical performance of high-strength concrete10.1016/S0008-8846(98)00235-X ↗
9. Effect of lateral stresses on fiber debonding/pull-out10.1016/0961-9526(95)00064-T ↗
10. Effect of silica fume on steel fiber bond characteristics in reactive power concrete10.1016/j.cemconres.2003.12.023 ↗
11. Improving the dispersion of steel fibers in cement mortar by the addition of silane10.1016/S0008-8846(00)00470-1 ↗
12. Composite mechanism of polymer modified cement10.1016/0008-8846(94)00120-N ↗
13. Pore size distribution of hydrated cement pastes modified with polymers10.1016/S0008-8846(01)00549-X ↗
14. Pore size distribution and oxygen diffusion resistance of polymer-modified mortars10.1016/0008-8846(91)90012-7 ↗
15. Interactions of polymer and organic admixtures on Portland cement hydration10.1016/0008-8846(87)90076-7 ↗
16. Pore size distribution of hydrated cement pastes modified with polymers10.1016/S0008-8846(01)00549-X ↗