A visual investigation on chloride ingress into ceramic waste aggregate mortars having different water to cement ratios
Source abstract
Abstract
Abstract In reinforced concrete structures, chloride ingress causes deleterious consequences due to corrosion of steel reinforcement. With no protective means, the service life of the structures is shortened proportionately to the rate of chloride ingress designated as a coefficient of chloride diffusion. Previous experimental study using the rapid chloride migration test has indicated that the use of ceramic waste aggregate (CWA) is effective in lowering the chloride diffusion coefficient of the 0.5 water to cement (W/C) ratio mortars and thus making mortars more durable. In this study, further experiments were conducted to seek visual evidences of the inhibiting of chloride ingress in the CWA mortars using a silver nitrate (AgNO 3 ) solution spray method and an electron probe microanalysis (EPMA) after 24 weeks submersion in 5.0 wt.% sodium chloride solution. The CWAs tested at this time were electrical porcelain insulator wastes from an electric power company, which were crushed and ground in a recycle plant. In particular, the test program was extended to investigate the CWA mortars at a wider range of W/C ratios, i.e. 0.4, 0.5, and 0.6. All the CWA mortars were also compared with their counterpart mortars made of typical river sand (RS). It is visually found that, at the W/C ratio of 0.4, 0.5, and 0.6, the CWA mortar is more effective in resisting chloride ingress (having lower coefficient of apparent chloride diffusion) than the RS mortar. Moreover, the compression test was carried out. It is worth noting that the CWA has no adverse effect on the compressive strength of mortars in relation to river sand.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Japan Cement Association. Receiving situation of waste material and by-product used in cement industry. [in Japanese].
2. Reduction of natural resource consumption in cement production in Japan by waste utilization10.1007/s10163-012-0042-4 ↗
3. Adopted technology and basis for selection at municipal solid waste landfill facilities construction in recent years in Japan10.1177/0734242X09345363 ↗
4. The use of waste ceramic tile in cement production10.1016/S0008-8846(00)00202-7 ↗
5. Strength development of concrete containing granulated abandonment insulator
6. Mechanical behavior of non-structural concrete made with recycled ceramic aggregates10.1016/j.cemconcomp.2004.07.005 ↗
7. Concrete with ceramic waste aggregate10.1016/j.cemconcomp.2005.04.003 ↗
8. Effects on concrete durability of using recycled ceramic aggregates10.1617/s11527-005-9014-7 ↗
9. Effect of crushed ceramic and basaltic pumice as fine aggregates on concrete mortars properties10.1016/j.conbuildmat.2006.06.002 ↗
10. Characterization of ceramic roof tile wastes as pozzolanic admixture10.1016/j.wasman.2008.10.019 ↗
11. Structural concrete with incorporation of coarse recycled concrete and ceramic aggregates: durability performance10.1617/s11527-008-9411-9 ↗
12. Use of porous ceramic waste aggregates for internal curing of high-performance concrete10.1016/j.cemconres.2009.01.007 ↗
13. Reusing ceramic wastes in concrete10.1016/j.conbuildmat.2009.10.023 ↗
14. Utilization of ceramic waste as fine aggregate within Portland cement and fly ash concretes10.1016/j.cemconcomp.2010.02.004 ↗
15. Jacintho AEPGA, Campos MA, Paulon VA, Camarini G, Lintz RCC, Barbosa LAG. The use of crushed porcelain electrical isolators as fine aggregate in mortars. In: Castro-Borges P, Moreno EI, Sakai K, Gjørv OE, Banthia N, editors. Proceedings of Concrete under Severe Conditions 2010. p. 1593–600.10.1201/b10552-217 ↗
16. Concrete made from ceramic industry waste: durability properties10.1016/j.conbuildmat.2010.11.049 ↗
17. Compressive strength and durability properties of ceramic wastes based concrete10.1617/s11527-010-9616-6 ↗
18. The basic characteristics of porous concrete using insulator for coarse aggregate
19. Studies on strength characteristics on utilization of waste materials as coarse aggregate in concrete
20. Reuse of sanitary ceramic wastes as coarse aggregate in eco-efficient concretes10.1016/j.cemconcomp.2011.08.015 ↗
21. Compressive strength and resistance to chloride penetration of mortars using ceramic waste as fine aggregate10.1016/j.conbuildmat.2011.05.008 ↗
22. Chloride ion penetration into mortar containing ceramic waste aggregate10.1016/j.conbuildmat.2012.01.018 ↗
23. Evaluation of AgNO3 solution spray method for measurement of chloride penetration into hardened cementitious matrix materials
24. Chloride ingress profiles measured by electron probe micro analysis
25. Applications of electron probe microanalyzer for measurement of Cl concentration profile in concrete10.3151/jact.4.369 ↗
26. Study on recycling crushed insulator to safe shaped aggregate
27. Japanese Industrial Standards. Crushed stone and manufactured sand for concrete (JIS A 5005); 2010. p. 146–8 [in Japanese].
28. Japan Society of Civil Engineers. Test methods for compressive strength of mortar and cement paste using cylindrical specimens (JSCE-G 505–1999). Standard specifications for concrete structures. Test methods and specifications 2005. p. 247–8 [in Japanese].
29. Japan Society of Civil Engineers. Area analysis method of elements distribution in concrete by using EPMA (JSCE-G 574–2010). Standard specifications for concrete structures. Test methods and specifications; 2010. p. 333–43 [in Japanese].
30. Chloride ingress in cement paste and mortar10.1016/S0008-8846(99)00131-3 ↗
31. Diffusion of chloride ions from seawater into concrete10.1016/0008-8846(79)90029-2 ↗
32. Factors influencing chloride transport in concrete structures exposed to marine environments10.1016/j.cemconcomp.2007.09.005 ↗
33. Prediction of time dependent chloride transport in concrete structures exposed to a marine environment10.1016/j.cemconres.2009.09.023 ↗
34. Japan Society of Civil Engineers. Standard specifications for concrete structures. Design; 2007. p. 55 [in Japanese].