journal article·2013-04

Strength characteristics of SBS modified asphalt mixes with various aggregates

Maninder Singh, Praveen Kumar, Mannan Rai Maurya

Publisher page

Abstract

Abstract In recent years, many authors have researched polymer-modified bituminous (PMB) mixes and tried to better understand the effect of these modifiers on the strength characteristics of hot mix asphalt mixes. The objective of this study is to determine the effect of bitumen modification with varying percentage of Styrene bitudiene styrene (SBS 3%, 5% and 7%) for preparing the hot mix asphalt (HMA) containing various aggregates (marble, granite and quartzite) and compare the results with mixes prepared with neat VG 30 HMA. The selection of aggregates has been made on the basis of their acidic and basic nature depending upon the amount of silica oxide and calcium carbonate present in them. Dynamic shear rheometer (DSR) was used to determine the mixing and compacting temperatures of modified bitumen and performance grade based on G * /Sin δ value. The physical and mechanical properties of SBS modified bitumen and neat bitumen aggregates mixes are evaluated. Retained Marshall Stability (RMS) test and tensile strength ratio (TSR) tests were carried out to determine the moisture susceptibility and wheel tracking test was performed to compare the results of permanent deformation in samples. The results indicate that there was significant improvement in the strength characteristics, rutting resistance and moisture susceptibility of SBS modified mixes. Aggregates basic in nature i.e. with higher calcium (Ca) content show better bonding with neat bitumen compared to acidic aggregates i.e. aggregates with higher silica (Si) content. But with modified bitumen the percentage improvement in strength and moisture susceptibility is more pronounced in case of siliceous aggregates compared to calcareous aggregates.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Transport Systems and Technology

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Jain · 1992
2. Bonemazzi · 1996
3. Polymer modified asphalt binders
4. Effect of the thermal degradation of SBS copolymers during the ageing of modified asphalts10.1016/j.polymdegradstab.2004.05.006 ↗
5. Investigation of rutting performance of asphalt mixtures containing polymer modifiers10.1016/j.conbuildmat.2005.08.014 ↗
6. Creep characteristics of asphalt modified by radial styrene–butadiene–styrene copolymer10.1016/j.conbuildmat.2005.09.006 ↗
7. Relationships between bitumen chemistry and low temperature behavior of asphalt10.1016/S0950-0618(97)00008-1 ↗
8. Improving durability of open-graded friction courses
9. Asphalt modified by styrene butadiene styrene triblock copolymer: morphology and model10.1061/(ASCE)0899-1561(2002)14:3(224) ↗
10. The effects of using lime and styrene–butadiene–styrene on moisture sensitivity resistance of hot mix asphalt10.1016/j.conbuildmat.2008.08.019 ↗
11. Logaraj S. Chemistry of asphalt–aggregate interaction – influence of additives. Moisture Damage Symposium. Laramie, Wyo, 2002.
12. Graf PE, Factors affecting moisture susceptibility of asphalt concrete mixes. Paper presented at the annual meeting of association of asphalt technologists. Clearwater, FL; 17–19 February 1986.
13. Barton · 1983
14. Curtis · Fuel Sci Technol Int · 1989 · 7 · 112510.1080/08843758908962289 ↗
15. Curtis · Transp Res Rec · 1989 · 1228
16. Brannan · Transp Res Rec · 1991 · 1323 · 10
17. Puzinauskas · 1990
18. Petersen · 1982
19. Hicks · 1991
20. Behavior of asphalt concrete mixtures with reclaimed polyethylene as additive10.1061/(ASCE)0899-1561(2007)19:6(500) ↗
21. Rheology and stability of bitumen/EVA blends10.1016/j.eurpolymj.2004.06.001 ↗
22. Petersen · 1994 · vol. 3
23. Development of binders specification based on characterization of damage behaviour
24. Casola John R, Mixing and compaction temperatures of asphalt binders in hot mix asphalt, NCHRP Report 648, TRB 2010.
25. Effects of various additives on the moisture damage sensitivity of asphalt mixtures10.1016/j.conbuildmat.2004.05.003 ↗
26. Anagnos JN, Kennedy TW. Practile method of conducting the indirect tensile test. Centre of Highway Research, University of Texas at Austin, Res. Rep. August, 1972, 98-10.
27. Huang · 1993
28. Permanent deformation (rutting) considerations in asphalt concrete pavement sections
29. Model prediction of rutting in asphalt concrete10.1061/(ASCE)0733-947X(1998)124:5(448) ↗
30. Determination of the temperature for mixing aggregates with polymer-modified asphalt10.1080/10298430108901715 ↗
31. Shuler · 1992
32. Terrel · 1989
33. Cheng DingXin, Little Dallas N, Lytton Robert L. Moisture damage evaluation of asphalt mixture by considering both moisture diffusion and repeated load conditions, TRB 2003 Annual meeting.10.3141/1832-06 ↗
34. Strength characteristics of polymer modified mixes10.1080/10298430500495147 ↗