Permeation characteristics of self compacting concrete made with partially substitution of natural aggregates with rounded lightweight aggregates
Source abstract
Abstract
Abstract This study presents transport properties of self-compacting concretes (SCCs) in which natural aggregates had been partially replaced with lightweight fine (LWFA) and coarse aggregate (LWCA). Lightweight aggregates were manufactured through the cold bonding pelletization of 90% fly ash and 10% portland cement in a tilted pan at room temperature. A total of 17 SCCs with a water/binder ratio of 0.32 were produced at a fixed slump flow of 720 ± 20 mm by adjusting the amount of High-Range-Water-Reducing-Admixture (HRWRA) used. The transport properties were investigated via water sorptivity, water permeability, rapid chloride ion permeability, and gas permeability. Mechanical properties of SCCs were determined in terms of compressive strength, splitting tensile strength, and structural efficiency. It was found that with increasing volume of LWFA and/or LWCA, the hardened properties reduced regardless of testing age. Moreover, in spite of lower compressive strength, SCCs with LWFA had better performance in the case of durability related properties compared to the SCCs with LWCA.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Effects of recycled concrete aggregate on the fresh properties of self-consolidating concrete10.1016/S1644-9665(12)60093-4 ↗
2. The effect of coarse aggregate on fresh and hardened properties of self-compacting concrete (SCC)10.1016/j.proeng.2011.07.102 ↗
3. Performance and durability of concrete made with demolition waste and artificial fly ash-clay aggregates10.1016/S0956-053X(96)00038-4 ↗
4. Turkish Statistical Institute, Press Release 8. , 2010.
5. Influence of fly ash on strength and sorption characteristics of cold-bonded fly ash aggregate concrete10.1016/j.conbuildmat.2008.09.018 ↗
6. Effect of curing method on characteristics of cold bonded fly ash aggregates10.1016/j.cemconcomp.2008.06.006 ↗
7. Utilization of fly ash engineering pellet aggregates10.1007/s00254-006-0248-7 ↗
8. Utilization of fly ash as pelletization process; theory, application, areas and research results10.1016/S0921-3449(00)00042-2 ↗
9. Gesoğlu M. Effects of lightweight aggregate properties on mechanical, fracture, and physical behavior of lightweight concretes. PhD thesis, Boğaziçi University, Istanbul; 2004.
10. Properties of lightweight aggregates produced with cold-bonding pelletization of fly ash and ground granulated blast furnace slag10.1617/s11527-012-9855-9 ↗
11. Recycling ground granulated blast furnace slag as cold bonded artificial aggregate partially used in self-compacting concrete10.1016/j.jhazmat.2012.08.013 ↗
12. Fly ash lightweight aggregates in high performance concrete10.1016/j.conbuildmat.2007.09.001 ↗
13. Characteristics of self-consolidating concrete using two types of lightweight coarse aggregates10.1016/j.conbuildmat.2009.08.004 ↗
14. Durability design and performance of self-consolidating lightweight concrete10.1016/j.conbuildmat.2005.01.003 ↗
15. Mix proportioning and properties of self-consolidating lightweight concrete containing glass powder
16. Durability of self-consolidating lightweight aggregate concrete using dredged silt10.1016/j.conbuildmat.2008.11.006 ↗
17. An experimental study on the workability of self-compacting lightweight concrete10.1016/j.conbuildmat.2008.08.023 ↗
18. Self-compacting lightweight concrete produced with expanded clay aggregate10.1016/j.conbuildmat.2012.04.111 ↗
19. Comparison of workability and mechanical properties of self-compacting lightweight concrete and normal self-compacting concrete10.1179/143307507X196239 ↗
20. Hela R, Hubertová M. Development of self compacting lightweight concrete using lightweight liapor aggregate. The financial support of the Ministry of Education, Youth and Sports of the Czech Republic 2005: Project No. 1M0579.
21. EFNARC. European guidelines for self-compacting concrete, specification and production and use, Association House, UK; 2005.
22. Self-consolidating characteristics of concrete composites including rounded fine and coarse fly ash lightweight aggregates10.1016/j.compositesb.2014.01.008 ↗
23. An experimental research on the fluidity and mechanical properties of high-strength lightweight self-compacting concrete10.1016/j.cemconres.2004.11.003 ↗
24. ASTM C 127. Standard test method for specific gravity and absorption of coarse aggregate, Annual Book of ASTM Standards; 2007.
25. ASTM C192/C192M. Standard practice for making and curing concrete test specimens in the laboratory. Annual Book of ASTM Standards; 2007.
26. TS 706 EN 12620-A1. Aggregates for Concrete. Institute of Turkish Standards, Ankara, Turkey; 2009.
27. ASTM C39/C39M-12. Standard test method for compressive strength of cylindrical concrete specimens. Annual book of ASTM Standard; 2012.
28. ASTM C 496. Standard test method for split tensile strength of cylindrical concrete specimens. Annual Book of ASTM Standards; 1994.
29. TS EN 12390-8. Testing hardened concrete – Part 8: Depth of penetration of water under pressure. Institute of Turkish Standards, Ankara, Turkey; 2002.
30. ASTM C1202. Test method for electrical indication of concrete’s ability to resist chloride ion penetration, Annual Book of ASTM Standards; 2006.
31. Permeability of concrete as a criterion of its durability
32. Design considerations for reinforced lightweight concrete10.1016/0262-5075(81)90031-2 ↗
33. Euro Light Concrete Project. Mechanical properties of lightweight aggregate concrete. Economic Design and Construction with Light Weight Aggregate Concrete 2000: Document BE96 3942/R23.
34. Durability aspect of concretes composed of cold bonded and sintered fly ash lightweight aggregates10.1016/j.compositesb.2013.04.070 ↗
35. Water absorption, permeability, and resistance to chloride-ion penetration of lightweight aggregate concrete10.1016/j.conbuildmat.2010.06.020 ↗
36. Strength and transport properties of steam cured and water cured lightweight aggregate concretes10.1016/j.conbuildmat.2013.08.042 ↗
37. Interfacial interactions in lightweight aggregate concretes and their influence on the concrete strength10.1016/0958-9465(96)00002-9 ↗
38. Development of high-performance concrete having high resistance to chloride penetration10.1016/S0029-5493(01)00484-8 ↗
39. Microstructure of the interfacial zone between lightweight aggregate and cement paste10.1016/0008-8846(90)90103-5 ↗
40. Durability aspect of concretes composed of cold bonded and sintered fly ash lightweight aggregates10.1016/j.compositesb.2013.04.070 ↗