journal article·2010-01

Influence of the temperature on the compression strength parallel to grain of paricá

M.J. Manríquez, P.D. Moraes

Publisher page

Abstract

Abstract The aim of this work is to determine the influence of the temperature, in a range from 20 °C to 230 °C, on the compression strength parallel to grain of parica ( Schizolobium amazonicum ) from cultivated forests. The sample was formed by 105 small clear specimens assembled in 15 groups of seven elements. The specimens of each group were heated at a constant temperature, during 180 min, before the mechanical test was performed in a temperature-controlled chamber. The results obtained have shown that the temperature increase leads to a nonmonotonic decrease of the compression strength, reaching 35% of compression strength at room temperature. This decrease can be associated to the influence of the temperature on the wood polymers and the moisture content of the specimens.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Wood Treatment and Properties · Natural Fiber Reinforced Composites · Lignin and Wood Chemistry

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Terezo RF, Szücs CA. Anatomic and mechanical properties of Schizolobium amazonicum at different ages. In: All division 5 conference, forest products and environment. Oral communication. Taipei, Taiwan; 2007.
2. Kollmann · 1968
3. Bodig · 1993
4. Effect of pyrolytic temperatures on the longitudinal strength of dry douglas fir10.1520/JTE10025J ↗
5. Performance of structural wood members exposed to fire
6. Effect of the moisture content and temperature on the mechanical properties of wood. An analysis of immediate effects
7. Green DW, Winandy JE, Kretschmann DE. Mechanical properties of wood. In: Wood handbook – wood as an engineering material. Gen. Tech. Rep. FPL-GTR-113. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory; 1999. p. 1–45.
8. Adjusting modulus of elasticity of lumber for changes in temperature
9. Compression mechanical properties of wood at temperatures simulating simulating fire conditions10.1002/fam.759 ↗
10. Influence of temperature on the modulus of elasticity (MOE) of Pinus sylvestris L10.1515/HF.2004.021 ↗
11. Influence of temperature on the embedding strength10.1007/s00107-004-0568-9 ↗
12. Winandy JE, Rowell RM. The chemistry of wood strength. In: Handbook of wood chemistry and wood composites. Boca Raton; 2005.10.1201/9780203492437 ↗
13. Schniewind · 1985
14. Fengel · 1989
15. Chemical composition of wood and pulps: basic constituents and their distribuition
16. Beall FC, Eickner HW. Thermal degradation of wood components. Forest products research paper, FPL 130; 1970.
17. Thermal degradation
18. The influence of thermal treatment on cellulose10.1007/BF02619208 ↗
19. Changes of crystallinity in wood cellulose by heat treatment under dried and moist conditions10.1007/BF00765800 ↗
20. Magnetic resonance studies of thermally modified wood10.1515/HF.2002.098 ↗
21. Thermal softening of lignin, hemicellulose and cellulose
22. Glass transition of wood components hold implications for molding and pulping processes
23. The glass transitions of lignin and hemicellulose and their measurement by differential thermal analysis
24. Viscoelastic properties of in situ lignin under water-saturated conditions10.1007/BF01026988 ↗
25. Salmen, L. Temperature and water induced softening behaviour of wood fiber based material. PhD thesis. Department of Paper Technology. The Royal Institute of Technology, Stockholm, Sweden; 1982.
26. Olsson AM, Salmén L. Humidity and temperature affecting hemicellulose softening in wood. In: International conference of COAST action E8. Denmark; 1997. p. 269–79.
27. Associação Brasileira de Normas Técnicas. NBR 7190. Projeto de estruturas de madeira, Rio de Janeiro; 1997.
28. Montgomery · 2003
29. Comparing the VOC emissions between air-dried and heat-treated scots pine wood10.1016/S1352-2310(02)00152-8 ↗
30. Oil-heat-treatment of wood process and properties
31. Rowell MR, Youngs R. Dimensional stabilization of wood in use forest products laboratory research note FPL-0243; 1981.10.2737/FPL-RN-243 ↗