Sensitivity and accuracy in rebar diameter measurements from dual-polarized GPR data
Source abstract
Abstract
Abstract According to some authors, high-frequency GPR (Ground Penetrating Radar) can provide on-site non-destructive measurements of the diameter of concrete reinforcements. The procedure should be based on the analysis of radar energy scattered by reinforcements when illuminated with parallel and perpendicular polarization. The theory of Radar Cross Section (RCS) supports this assumption. However, laboratory test performed on concrete specimens indicate that many practical problems must be solved to obtain reliable and stable measurements from real data. Synthetic data were used to analyze the problem. A data processing sequence was optimized to obtain the best fit between synthetic results and theoretical expectations. Results on real data processed with the same sequence were less encouraging. The comparison with synthetic data was essential to understand that background subtraction is the most critical issue. This problem is of larger importance than the fact that commercial GPR systems generate wide band radar pulses while RCS theory is frequency dependent. Once identified, the problem was directly addressed and results improved significantly. Although delicate, the methodology is potentially showing a high sensitivity which is proportional to wavelength. An optimal selection of antenna frequency versus rebar diameter range is proposed to preserve the highest sensitivity. Accuracy is related with sensitivity but also with stability and repeatability of the measurements. On-site experiments performed to explore this issue suggest that the problem must be addressed statistically. This makes the procedure more complex but the use of dual-polarized antennas might be the solution to save efficiency and cost-effectiveness.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Geophysical Methods and Applications · Non-Destructive Testing Techniques · Microwave Imaging and Scattering Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Processing strategies for high-resolution GPR concrete inspections10.1016/j.ndteint.2010.02.002 ↗
2. Lualdi M, Zanzi L. 3D GPR investigations on building elements using the PSG. In: Proceedings SAGEEP 2003, April 6–10, San Antonio (TX). p. 803–12.10.4133/1.2923226 ↗
3. Lualdi M, Zanzi L, Binda L. Acquisition and processing requirements for high quality 3D reconstructions from GPR investigations. In: Proceedings of the international symposium non destructive testing in civil engineering NDT-CE 2003, September 16–19, Berlin.
4. Zanzi L, Arosio D, Munda S, da Porto F, Mosele F. Quality assessment of reinforced masonry walls by means of non destructive tests. In: Proceedings of 2nd Canadian conference on effective design of structures 2008, May 20–23, Hamilton, Canada.
5. Arosio D, da Porto F, Mosele F, Munda S, Zanzi L. Calibration and on-site application of radar and sonic methods for quality control of reinforced masonry. In: Proceedings of NDTCE 2009, June 30–July 3, Nantes, France.
6. Non-destructive quality control of reinforced masonry buildings10.1061/(ASCE)IS.1943-555X.0000054 ↗
7. Gucunski N, Rascoe C, Parrillo R, Roberts R. Comparative study of bridge deck condition assessment by high frequency GPR. In: Proceedings of symp. NDE/NDT for highways and bridges (SMT) 2008, September 8–12, Oakland (CA).
8. Using ground penetrating radar and time-frequency analysis to characterize construction materials10.1016/j.ndteint.2010.10.002 ↗
9. Detection of linear objects in GPR data10.1016/j.sigpro.2003.12.010 ↗
10. Location of steel reinforcement in concrete using ground penetrating radar and neural networks10.1016/j.ndteint.2004.06.011 ↗
11. Measurement radius of reinforcing steel bar in concrete using digital image GPR10.1016/j.conbuildmat.2008.05.018 ↗
12. Hunik R. Detection and sizing of cables and leads with sub-surface radar. In: Proceedings of the 12th world conference on non-destructive testing 1989, 23–28 April, Amsterdam.
13. Assessing bar size of steel reinforcement in concrete using ground penetrating radar and neuronal networks10.1784/insi.45.12.813.52980 ↗
14. Utsi V, Utsi E. Measurements of reinforcement bar depths and diameters in concrete. In: Proceedings of the tenth international conference on ground penetrating radar 2004, 21–24 June, Delft.
15. Lualdi M, Zanzi L. Analytical and experimental evaluation of the Radar Cross Section of concrete reinforcements. In: Proceedings of the NDE conference on civil engineering 2006, 14–18 August, St. Louis (MO).
16. Ruck · 1970 · vol. 1
17. Modelling of ground penetrating radar using GprMax10.1016/j.conbuildmat.2005.06.007 ↗
18. Lualdi M, Zanzi L, Ciano M. Experimenting Dual-Polarized antennas for three-dimensional surveys. In: Proceedings of the 11th international conference on GPR 2006, June 19–22, Columbus Ohio.